• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Engine Code: ALG, AMX, APR, AQD
• Fitting Position: transmission sided
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to conn. shaft: 33
• Length [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fabrication Number: NPW-VW-002
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-AU-009
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Manufacturer: NTY
• Name: NTY NPZ-AU-009

• Fitting Position: Wheel Side
• Braking/Drive Dynamics: for vehicles with ABS
• Outer Diameter [mm]: 99.5
• Seal Diameter [mm]: 59
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Manufacturer: LPR

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Length [mm]: 97
• Diameter 1 [mm]: 98
• ABS Ring Ø [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Thread Size: M16x1,5
• Manufacturer: BGA

• Transmission Type: Manual Transmission, automatically operated
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16 x 1,5
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle, Wheel Side
• Engine Code: ACK
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• Supplementary Article/Supplementary Info: with attachment material
• Lubrication: with grease lubrication
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: DELLO AUTOMEGA

• Engine Code: ALG, AMX, APR, AQD
• Fitting Position: Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Length [mm]: 93.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) to: 8D...X...199 999
• Engine Code: ALG, ACK, APR, AQD
• Block Separation:
• Vehicle Identification Number (VIN) from: 8D...X...200 001
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Bellows Material: NBR (nitrile butadiene rubber)
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Transmission Type: Manual Transmission, automatically operated
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Parameter: DP2110.10.1123
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission, automatically operated
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Additional information: 15-1267MET
• Lisainfo: 15-1267MET

• Fitting Position: Front Axle Left, Wheel Side, Front Axle Right
• Parameter: DP2110.10.1127
• Length [mm]: 93.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 63
• External Toothing wheel side: 38
• External Toothing differential side: 27
• Seal Diameter [mm]: 59.5
• Specification: BELL PIN LENGTH - 34
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0026

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Toothing wheel side: 34
• Fabrication Number: NPW-VW-006
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 98
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Wheel Side, Front Axle Right
• Length [mm]: 93.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

• Engine Code: ACK, ALG, APR, AQD
• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 97.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission, Automatic Transmission
• Joint Type: CV Joint
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Manufacturer: JP GROUP
• Lisainfo: CV joint, front, outer
• Additional information: CV joint, front, outer

• Transmission Type: Manual Transmission, automatically operated
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Length [mm]: 97.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Front Axle
• External Toothing differential side: 33
• Specification: BELL PIN LENGTH - 32
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 87.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Model Year to: 1999
• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to transmission: 34
• Seal Diameter [mm]: 114
• Outer Diameter [mm]: 90
• Joint Type: Tripod Joint
• Name: Liigendlaager, veovoll
• Manufacturer: MAX

• Fitting Position: Wheel Side, Front Axle
• Engine Code: ACK, ALG, APR, AQD
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: transmission sided, Front Axle Left
• Joint Type: CV Joint
• Length [mm]: 556
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: transmission sided, Front Axle Right
• Joint Type: CV Joint
• Length [mm]: 578
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Length [mm]: 32
• Internal Toothing differential side, conn. to conn. shaft: 33
• Joint Type: Disc Joint
• Joint Diameter [mm]: 99.7
• Manufacturer: OPTIMAL ZAWIESZENIE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Engine Code: ALG/AMX/APR/AQD
• Weight [kg]: 2.536
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: MT
• Fitting Position: Front Axle
• Internal Toothing differential side, conn. to transmission: 34
• Length [mm]: 85
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 26-5502MG
• Additional information: 26-5502MG

• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 53
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Length 2 [mm]: 92
• Internal Toothing wheel side: 30
• Number of pins: 45
• Version: 6 balls
• Fitting Position: outer
• Name: SN OJK54.010
• Manufacturer: SNR

• Model Year to: 1998
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.321
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Supplementary Article/Info 2: with ABS sensor ring
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right
• External Toothing differential side: 34
• Specification: BELL PIN LENGTH - 59
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.681
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Supplementary Article/Info 2: with ABS sensor ring
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Model Year to: 1998
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Disc Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN): [3B-WE394609;], [4B-X-020000;]
• Fitting Position: outer
• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 97.5
• Name: SN OJK54.001
• Manufacturer: SNR

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• ABS Ring Ø [mm]: 81
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 97
• Thread Size: M16x1.5x77
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Engine Code: ACK
• Transmission Type: 5-Speed Automatic Transmission
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Supplementary Article/Supplementary Info: with grease
• Fitting Position: Front Axle, Wheel Side
• Outer Diameter 1 [mm]: 98
• Outer Diameter 2 [mm]: 59.5
• Weight [kg]: 2.95
• Bellows Material: Rubber
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 60
• Internal Toothing differential side, conn. to transmission: 34

• Engine Code: ALG, APR, AQD, ACK
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Engine Code: ALG, APR, AQD, ACK
• Transmission Type: Fully Automatic
• Fitting Position: Front Axle, transmission sided
• Length [mm]: 71
• Bore Ø [mm]: 10.4
• Internal Toothing differential side, conn. to conn. shaft: 34
• Number of bores: 6
• Outer Diameter [mm]: 89
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Manufacturer: SKF

• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to transmission: 34

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.