• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: AQD, APR, AMX, ALG, ACK
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ACK, ALG
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AMX, APR, AQD
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Engine Code: AQD, APR, AMX, ALG, ACK
• Lambda Sensor: Heated
• Number of circuits: 4
• Length [mm]: 1,500
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: AMX, APR, AQD
• Construction Year from: 07.1999, 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: Left, Right, before catalytic converter, after catalytic converter

• Construction Year to: 12.1999
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: ACK, ALG
• Cable Length [mm]: 620
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV100

• Resistor [Ohm]: 3.5
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 520
• Cable Length [mm]: 520
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Engine Code: AMX
• Voltage [V]: 12
• Length [mm]: 1,440
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV079
• Manufacturer: ESEN SKV

• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: ACK
• Construction Year from: 08.1997
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Engine Code: AMX
• Voltage [V]: 12
• Length [mm]: 1,435
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV078
• Manufacturer: ESEN SKV

• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Length [mm]: 1,690
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,690
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV616
• Manufacturer: ESEN SKV

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Engine Code: AMX, APR, AQD
• Cable Length [mm]: 620
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

• Engine Code: AMX, APR, AQD
• Construction Year from: 07.1999, 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, Left, Right, before catalytic converter

• Construction Year to: 01.1999
• Quantity: 2
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ACK, ALG, AMX, APR, AQD
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: AMX
• Construction Year from: 07.1999
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Engine Code: ACK,ALG
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Name: VA 368478
• Manufacturer: VALEO

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Construction Year from: 08.1998
• Construction Year to: 12.1998
• Fitting Position: Left, after catalytic converter
• Engine Code: AMX
• Cable Length [mm]: 2
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Engine Code: AMX
• Construction Year from: 07.1999
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 078906265M
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 154
• Gross Weight [g]: 187
• Manufacturer: DENSO
• Name: DN DOX-2010
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AMX
• Construction Year from: 07.1999
• Fitting Position: Left
• for OE number: 58906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,690
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Manufacturer: DENSO
• Name: DN DOX-2035

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 550
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003759

• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Overall Length [mm]: 1,700
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Lambda Sensor: Heated
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA