• Filter type: Spin-on Filter
• Height [mm]: 152
• Outer Diameter 1 [mm]: 81
• Outer Diameter 2 [mm]: 86
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Outer Diameter [mm]: 76
• Width [mm]: 21.5
• for article number: 1118203900
• Manufacturer: JP GROUP
• Lisainfo: Pulley for JP item no. 1118203900
• Additional information: Pulley for JP item no. 1118203900

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 67.5
• Width [mm]: 88
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 16.6 mm
• Additional information: Brake pad set, rear, 16.6 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width [mm]: 156
• Thickness [mm]: 20.4
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 20.3 mm
• Additional information: Brake pad set, front, 20.3 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width [mm]: 156
• Thickness [mm]: 20.4
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake pad set, front, 20.4 mm
• Additional information: Brake pad set, front, 20.4 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74.1
• Width [mm]: 156
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 19.8 mm
• Additional information: Brake pad set, front, 19.8 mm

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 157
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: In-Line Filter
• Surface: Painted
• Colour: black
• Outer Diameter [mm]: 85
• Height [mm]: 170
• Thread Size Entry: M 14 x 1,5 mm
• Thread Size Exit: M 12 x 1,5 mm
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Spin-on Filter
• Fuel Type: Diesel
• Height [mm]: 155
• Outer Diameter [mm]: 85
• Seal Diameter [mm]: 70
• for OE number: 116760469600
• Manufacturer: KAMOKA FILTRY PALIWA

• Height [mm]: 159
• Outer Diameter [mm]: 81
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 17.3
• Name: CH CFF100206
• Manufacturer: CHAMPION

• Height [mm]: 152
• Outer Diameter [mm]: 81
• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 86
• Thread Size Entry: M 14 X 1.5
• Thread Size Exit: M 12 X 1.5
• Manufacturer: DRIVE

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 88
• Inner Diameter 1 [mm]: 81
• Height [mm]: 152
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: In-Line Filter
• Height [mm]: 154.5
• Outer Diameter [mm]: 86.5
• Thread Size: M14 x 1,5, M12 x 1,5
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Height [mm]: 170
• Outer Diameter [mm]: 84
• Thread Size Entry: M14 x 1,5
• Thread Size Exit: M12 x 1,5
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Height [mm]: 152
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 86
• Thread Size Entry: M 14 X 1.5
• Thread Size Exit: M 12 X 1.5
• Name: Ktusefilter
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Height [mm]: 155
• Thread Size: M12x1,5 mm
• Outer Diameter [mm]: 88
• Quality class: PJ
• Name: Fuel filter

• Filter type: Spin-on Filter
• Height [mm]: 152
• Outer Diameter [mm]: 81.5
• Thread Size Entry: M14x1.5
• Thread Size Exit: M 12 X 1.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Diameter [mm]: 88
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 155
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Construction Year from: 03.1997
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• WVA Number: 20960
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Name: DE LP571
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Width [mm]: 88
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Connecting thread: M12x1,5
• Diameter [mm]: 86
• Supplementary Article/Supplementary Info: with gaskets/seals
• Filter type: Spin-on Filter
• Thread Size: M14x1,5
• Material: Steel
• Height [mm]: 155
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Height [mm]: 174
• Outer Diameter [mm]: 80
• Packing Type: Box
• Filter type: In-Line Filter
• Thread Size 1: M14x1.5
• Thread Size 2: M12x1.5
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 18.5
• Name: CH CFF100217
• Manufacturer: CHAMPION

• Filter type: In-Line Filter
• General Information: fuel filter
• Manufacturer: BORSEHUNG

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 88
• Thread Size: M12x1,5
• Height [mm]: 155
• Name: Fuel filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
ESCORT V KOMBI (GAL,
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
ESCORT V KOMBI (GAL,
(kvaliteediklass: PJ)"

• Driven Units: Camshaft
• Trim Level: HSN
• Number of Teeth: 153
• Width [mm]: 25
• Name: HAMMASRIHM
• Manufacturer: DAY

• Construction Year from: 01.1996
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• reinforced version:
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• WVA Number: 20960
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Name: DE LP2255
• Manufacturer: DELPHI

• Width [mm]: 25
• Number of Teeth: 153
• Belts: with rounded tooth profile
• Weight [kg]: 0.2
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year to: 02.1997
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• WVA Number: 21144
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Name: DE LP451
• Manufacturer: DELPHI

• Construction Year from: 01.1996
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with screw set
• Name: SW 30 91 6144
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 153
• Length [mm]: 1,224
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: BOS

• Filter type: In-Line Filter
• Outer Diameter [mm]: 88
• Overall Length [mm]: 175
• Manufacturer: HENGST FILTER

• Construction Year to: 03.1997
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 88
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• WVA Number: 21144
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.84
• Name: VA 302340
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21144
• Thickness [mm]: 15.1
• Width [mm]: 87
• Height [mm]: 66.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 67.5
• Thickness [mm]: 16.6
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Brake System: Lucas
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.8
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Filter type: In-Line Filter
• Height [mm]: 152
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 86
• Thread Size Entry: M14x1.5
• Thread Size Exit: M 12 X 1.5
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Width [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 202
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Thickness [mm]: 14
• Height [mm]: 44
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: FAST

• Fitting Position: Front Axle
• Height [mm]: 74.2
• Thickness [mm]: 20.3
• Warning Contact Length [mm]: 200
• Number of wear indicators [per axle]: 2
• Width [mm]: 156.4
• Brake System: ATE
• Manufacturer: LPR

• Filter type: In-Line Filter
• Diameter [mm]: 80.5
• Height [mm]: 171.5
• Thread Size Entry: M12x1,5
• Thread Size Exit: M14x1,5
• Packaging height [cm]: 17.6
• Net Weight [g]: 365
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: KNECHT
• Name: KN KL88

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, GAT4844, GAT4741
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 152
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Length [mm]: 1,216
• Observe technical data:
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Manufacturer Restriction: TRW
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21144
• Test Mark: E1 90R-01814/115
• Length [mm]: 87
• Thickness [mm]: 15.8
• Height [mm]: 66.8
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 16.5
• Length [mm]: 87.1
• Height [mm]: 66.6
• Wear Warning Contact: not prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: TRW
• WVA Number: 20668, 21144
• Name: SK VKBP90606
• Manufacturer: SKF

• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• Brake System: Teves
• Fitting Position: Front Axle
• Width [mm]: 156
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Outer Diameter [mm]: 72
• Width [mm]: 32.5
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01025/181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, GAT4844, GAT4741
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 153
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Length [mm]: 1,224
• Observe technical data:
• Name: Hammasrihm
• Manufacturer: GAT

• Driven Units: Camshaft
• Number of Teeth: 153
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.2
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Tensioner Pulley Actuation: Hydraulic
• Name: HAMMASRIHM
• Manufacturer: CON

• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with screw
• Width [mm]: 32
• Outer Diameter [mm]: 72
• Manufacturer: KAMOKA

Manufacturer: DELLO AUTOMEGA

• Fitting Position: Upper Left
• Diameter [mm]: 72
• Width [mm]: 27
• Tensioner Pulley Actuation: Hydraulic
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 67.5
• Thickness [mm]: 16.6
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Brake System: Lucas
• Weight [kg]: 0.8
• Name: HE 8DB355017951
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Construction Year from: 03.1997
• FMSI Code: D840-7715
• Test Mark: E1 90R-01881/567
• WVA Number: 20676 21938
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: incl. wear warning contact
• Width 1 [mm]: 156.6
• Width 2 [mm]: 156.3
• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1672

• Construction Year to: 03.1997
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 157
• Height [mm]: 74.2
• Thickness [mm]: 19.5
• WVA Number: 20676
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 215
• Operating Mode: Electric
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.07
• Name: VA 301049
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 67.5
• Thickness [mm]: 16.6
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Brake System: Lucas
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-01075/075
• MAPP code available:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Width [mm]: 193
• Thickness [mm]: 17
• Height [mm]: 68
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Manufacturer: BREMBO
• Name: BR P 85 013

• Fitting Position: Front Axle
• Width [mm]: 156.4
• Height [mm]: 74
• Thickness [mm]: 19.6
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Thickness [mm]: 16.5
• Test Mark: R90 Homologated
• Width [mm]: 88
• Height [mm]: 68
• Weight [kg]: 0.87
• Height 1 [mm]: 68
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Box
• WVA Number: 21144
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Front Axle
• Wear Warning Contact: with integrated wear sensor
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Article number of recommended accessories: 1 987 474 175
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20676
• Thickness [mm]: 20.4
• Height 1 [mm]: 74.2
• Height 2 [mm]: 74.4
• Width 1 [mm]: 156.4
• Width 2 [mm]: 156.5
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Length [mm]: 156.4
• Width [mm]: 74.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20.3, 19.5
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 0.542
• Name: SW 30 91 6058
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 03.1997
• Parameter: DP1010.10.0800
• Fitting Position: Front Axle
• Thickness [mm]: 18.5
• Length [mm]: 156.5
• Height [mm]: 74.2
• Wear Warning Contact: incl. wear warning contact
• Brake System: Ate-teves
• Warning Contact Length [mm]: 210
• Thickness 1 [mm]: 20.3
• Thickness 2 [mm]: 19.5
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• WVA Number: 20676
• Brake System: Teves
• Article number of recommended accessories: MBA1123
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Width [mm]: 156
• Thickness [mm]: 20
• Height [mm]: 74
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Warning Contact Length [mm]: 210
• Supplementary Article/Info 2: with piston clip
• Number of wear indicators [per axle]: 2
• WVA Number: 20676, 20678
• Manufacturer: BREMBO
• Name: BR P 85 026

• Vehicle Identification Number (VIN): [4B-X-140001;], [8D-T-155-001;]
• Width 1 [mm]: 32
• Outer Diameter 1 [mm]: 72
• Manufacturer: SNR
• Name: SN GT357.20

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• WVA Number: 20676
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 201-171
• Name: HE 8DB355007461
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: incl. wear warning contact
• Test Mark: E9 90R 01107/054
• Height [mm]: 74.2
• Width [mm]: 156.4
• Thickness [mm]: 19.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 74
• Spring clamp diameter [mm]: 46
• Thickness [mm]: 19.5
• Wear Warning Contact: incl. wear warning contact
• Warning Contact Length [mm]: 202
• Brake System: ATE
• Test Mark: E9 90R-02A1259/1629
• MAPP code available:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Disc Type: solid, Vented
• Manufacturer Restriction: ATE
• WVA Number: 20676, 20678
• Test Mark: E20 90R-02A0124/037
• Length [mm]: 156.2
• Thickness [mm]: 19.6
• Height [mm]: 74
• Manufacturer: BRECK KLOCKI HAMULCOWE

Wear Warning Contact: incl. wear warning contact, with integrated wear sensor

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• WVA Number: 20676
• Brake System: Teves
• Article number of recommended accessories: 82029300
• Observe mounting information:
• Packaging length [cm]: 10
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Outer Diameter [mm]: 72
• Width [mm]: 32.4
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA