Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
-
Lisainfo: Thermo switch for fan 85-
80 C -
Additional information: Thermo switch for fan 85-
80 C
-
Thread Size: M 22x1,
5 - Spanner Size: 29
- Number of connectors: 2
- Plug Type: Blade Terminal
-
Lisainfo: Thermo switch for fan 95-
90 C -
Additional information: Thermo switch for fan 95-
90 C
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: FAE
- Additional information: NRF32110
- Lisainfo: NRF32110
-
Thread Size: M10x1,
0 - Colour: black
- Number of connectors: 1
- Weight [kg]: 0.019
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 25
- Temperature range to [°C]: 125
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Name: SW 99 90 1939
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Temperature range to [°C]: 125
- Length [mm]: 25
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: JK
- Number of pins: 1
- Colour: black
- Thread Size: M10x1
- Spanner Size: 13
- Name: EP 1.830.073
- Manufacturer: EPS
- Quantity per packing unit: 3
- Ühenduste arv: 2
- Manufacturer: 3RG
-
Engine Code: CR,
JK -
Vehicle Identification Number (VIN) from: 81-
D- 000 001 - Block Separation:
- Thread Size: M10 x 1
- Spanner Size: 14
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 1
- Colour Coding: blue
- Weight [kg]: 0.019
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
- Temperatuurivahemik kuni [°C]: 125
- Väliskeere [mm]: M10 x 1
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: grey
- Spanner Size: 29
- for OE number: A0015403045
- Manufacturer: KAMOKA
- Colour: black
- Number of pins: 1
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Construction Year from: 06.1984
- Number of pins: 3
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 84,
91 -
Lisainfo: Thermo switch for fan 95-
84 C/ 102- 91 C, 3 pins -
Additional information: Thermo switch for fan 95-
84 C/ 102- 91 C, 3 pins
-
Engine Code: CR,
JK - Vehicle Identification Number (VIN) from: ******81*D*000001
- Block Separation:
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M 22x1,
5 - Number of pins: 2
- Housing Colour: black
- Switch point from [°C]: 92
- Switch point to [°C]: 87
- Manufacturer: FAE
- Required quantity: 1
- Construction Year from: 01.1985
- Lülituspunkt [°C]: 84
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: JK
- Number of pins: 2
- Temperature range from [°C]: 95
- Temperature range to [°C]: 90
-
Thread Size: M22x1,
5 - Spanner Size: 29
- Name: EP 1.850.032
- Manufacturer: EPS
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: blue
-
Switch Point [°C]: 95,
90 - Weight [kg]: 0.035
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: JK
-
External Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of connectors: 3
- Colour Coding: grey
-
Temperature range from [°C]: 95,
102 -
Temperature range to [°C]: 84,
92 - Weight [kg]: 0.061
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pistikkontaktide arv: 3
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: JK
-
Thread Size: M22 x 1,
5 - Colour: white
- Switch: for double thermal switch
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Weight [kg]: 0.077
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: JK
- Number of pins: 1
- Warn Temperature [°C]: 120
- Thread Size: M10x1
- Spanner Size: 19
- Manufacturer: EPS
- Engine Code: JK
-
Thread Size: M22x1,
5 - Switch: for double thermal switch
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Climate Zones: for hot climate zones
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Weight [kg]: 0.076
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: JK
- Number of pins: 3
-
Thread Size: M22x1,
5 - Spanner Size: 29
- Name: EP 1.850.635
- Manufacturer: EPS
- Thread Size: M22x1.5
- Number of pins: 3
- Tightening Torque [Nm]: 50
- Supplementary Article/Supplementary Info: with seal
-
Switch-on point [°C]: 102,
95 -
Shut-off Point [°C]: 84,
91 - Packaging width [cm]: 3.5
- Packaging length [cm]: 3.7
- Net Weight [g]: 62
- Packaging height [cm]: 7.2
- Name: MH TSW31
- Manufacturer: MAHLE
- Construction Year from: 08.1982
- Switch point to [°C]: 84
- Shut-off Point [°C]: 91
- Switch point from [°C]: 95
- Switch Point [°C]: 102
- Spanner Size: 29
- Name: VA 819769
- Manufacturer: VALEO
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 14
- Thread Size: M10x1
- for OE number: 027919501
- Supplementary Article/Info 2: with seal ring
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks