Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 08.1984
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Ball bearing for strut bearing,
upper -
Additional information: Ball bearing for strut bearing,
upper
- Vehicle Identification Number (VIN) from: ******8C*N*000001
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.012
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713000520
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.18
- Required quantity: 2
- Alternative Repair Kit: 80001653
- Supplementary Article/Info 2: without bearing
- Manufacturer: CORTECO
- Name: COC 80000243
- Construction Year from: 08.1984
- Installatsiooni pool: esisild mõlemapoolselt
- Välisläbimõõt [mm]: 37
- Name: Top mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Weight [g]: 117
- Component Number: 2
- Name: IM 32314
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 14
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: DELLO AUTOMEGA
- Vehicle Identification Number (VIN) from: ******8C*N*000001
- Fitting Position: Rear Axle
- Weight [kg]: 0.5
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Supplementary Article/Info 2: with rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Esisild
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.25
- Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Name: COC 21652956
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut with bearing,
front -
Additional information: Bearing for strut with bearing,
front
- OE-numbri jaoks: 191 412 249
- Installatsiooni pool: esisild mõlemapoolselt
- Piirangutega toode/piirangu info 2: koos laagriga
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3
(kvaliteediklass: PJ)"
- old version:
- Thickness [mm]: 41
- Inner Diameter [mm]: 14
- Colour: black
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Height [mm]: 37
- Inner Diameter [mm]: 14
- Colour Coding: green
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- old version:
- Thickness [mm]: 41
- Inner Diameter [mm]: 14
- Colour: black
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Name: SW 30 54 0007
- Manufacturer: SWAG
- Lisainfo: 30 54 0007 SWA
- Additional information: 30 54 0007 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: without ball bearing
- Fitting Position: Front Axle
- Weight [kg]: 0.266
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Height [mm]: 41
- Replace in pairs only:
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 814007310
- new version:
- Height [mm]: 37
- Inner Diameter [mm]: 14
- Colour Coding: green
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Name: SW 30 54 0005
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Name: KY SM1702
- Additional information: SM1702
- Lisainfo: SM1702
Technical Information: Suspension mounting w/ integrated suspension bearing
- Fitting Position: Front Axle
- Thickness [mm]: 37
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal - Colour Coding: green
- Required quantity: 2
- Manufacturer: TRW AMORTYZATORY
for OE number: 811 412 323, 811 412 323 B, 811 412 323 C, 811 412 323 D, 811 412 355, 811 412 365, 857 412 323 A, 857 412 323 B, 8A0 412 323 B, 8A0 412 323 D SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: esisild mõlemapoolselt
- Jämedus/Tugevus (mm): 41
-
Kaal (kg): 0,
25 -
Materjal: Kumm/
metall - Siseläbimõõt [mm]: 14
- Piirangutega toode/piirangu info 2: koos kuullaagriga
- Manufacturer: METALCAUCHO
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Supplementary Info: with integrated ball bearing
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- OE-numbri jaoks: 8AO 412 323 B
- Installatsiooni pool: esisild mõlemapoolselt
- Piirangutega toode/piirangu info 2: koos laagriga
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 80/VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/VW PASSAT
(kvaliteediklass: PJ)"
- Inner Diameter [mm]: 14
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
244652 - Quality class: Q
- Fitting Position: Front Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: with bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Packaging height [cm]: 9
- Manufacturer: MONROE
- Fitting Position: Front Axle
-
Material: Rubber/
Metal - Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
117475 - Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks