Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Thickness [mm]: 11
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) -
Lisainfo: Oil seal for crankshaft,
85x105x11 mm -
Additional information: Oil seal for crankshaft,
85x105x11 mm
- Required quantity: 1
- Quantity per packing unit: 10
- Fitting Position: frontal sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Fitting Position: frontal sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
-
Engine Code: WV,
YN - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: FPM
(fluoride rubber) - Fitting Position: frontal sided
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
- Additional information: FE03598
- Lisainfo: FE03598
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: frontal sided,
transmission sided - Height [mm]: 11
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
-
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
- Engine Code: WV
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Width [mm]: 11
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Engine Code: YN
- Engine Number to: 8192 242 682
- Fitting Position: transmission sided
- Height [mm]: 12
- Outer Diameter 1 [mm]: 105
- Inner Diameter 1 [mm]: 85
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA USZCZELKI
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 11
- Dust Cover: with dust lip
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Fitting Position: transmission sided
- Alternative Repair Kit: 105 753
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
-
Engine Code: WV,
YN - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 11
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist - Height 1 [mm]: 9
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Lisainfo: 81-
23708- 40 -
Additional information: 81-
23708- 40
- Thickness [mm]: 11
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
-
Material: FPM
(fluoride rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.058
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
- Thickness [mm]: 11
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Fitting Position: transmission sided
- Weight [kg]: 0.103
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 11
- Radial Shaft Seal Design: ASW
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 829.056
- Manufacturer: ELRING
- Lisainfo: 342.093 ELR
- Additional information: 342.093 ELR
- Fitting Position: frontal sided
-
Engine Code: YN,
WV - Block Separation:
- Engine Number to: 8192242682
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 85
- Outer Diameter 1 [mm]: 105
- Height 1 [mm]: 12
-
Material: FPM
(fluoride rubber) -
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Supplementary Article/Info 2: with flange
- Fitting Position: transmission sided
-
Fabrication Number: NUP-
VW- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 1
- Quantity per packing unit: 5
- Fitting Position: transmission sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: transmission sided
- Housing Type: with housing
- Housing material: Cast Aluminium
- Alternative Repair Kit: 101 407
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 11
- Radial Shaft Seal Design: ASW
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Supplementary Article/Info 2: with mounting sleeve
- Manufacturer: ELRING
- Engine Code: WV
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 85
- Outer Diameter 1 [mm]: 105
- Height 1 [mm]: 11
-
Material: FPM
(fluoride rubber) - Supplementary Article/Info 2: with mounting sleeve
- Swirl Type: Alternating Twist
- for OE number: 068103071F
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: sealing flang; rear
- Manufacturer: VIKA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: sealing flang; rear
- Manufacturer: VIKA
- Engine Code: WV
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 85
- Outer Diameter 1 [mm]: 131
- Outer Diameter 2 [mm]: 152
- Height 1 [mm]: 15.7
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Swirl Type: Alternating Twist
- for OE number: 028103171B
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks