• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Värvimarkeering: sinine
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Lülitusrõhk [bar]: 1,4
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Värvimarkeering: must
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) from: 44-J-200 100
• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Manufacturer: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värv: sinine
• Pistikkontaktide arv: 1
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 44-J-200 100
• Keermemõõt: M10x1
• Värv: hall
• Pistikkontaktide arv: 1
• Võtmekaugus: 24
• Manufacturer: DELLO AUTOMEGA

• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Lisainfo: Sender for oil temperature
• Additional information: Sender for oil temperature

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Surve (bar): 1,8
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: hall
• Pistikkontaktide arv: 1
• Surve alates (bar): 0,75
• Surve (bar) kuni: 1,05
• Läbimõõt [mm]: 2
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: sinine
• Pistikkontaktide arv: 1
• Keermemõõt: M10x1
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Läbimõõt [mm]: 3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: must
• Surve alates (bar): 1,2
• Surve (bar) kuni: 1,5
• Läbimõõt [mm]: 3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Quantity: 1
• Colour Coding: white
• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Length [mm]: 46
• Weight [kg]: 0.03
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Number of connectors: 1
• Thread Length [mm]: 13
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• General Information: oil pressure switch
• Manufacturer: VIKA

• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Väliskeere [mm]: M10x1
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Lülituspunkt alates [bar]: 0,15
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: OLISURVELšLITUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M 10x1
• Korpusevärv: must
• Surve (bar): 0,4
• Manufacturer: FAE

• Lülituspunkt alates [bar]: 0,15
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: SWAG
• Name: SW 30 23 0002

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Colour Coding: blue
• Length [mm]: 46
• Weight [kg]: 0.031
• Required quantity: 1
• Control Range [bar]: 0,15 - 0,35
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Inner Diameter [mm]: 2.54
• Number of connectors: 1
• Thread Length [mm]: 13
• General Information: oil pressure switch
• Manufacturer: VIKA

• Alternatively:
• Surve (bar): 3,5
• Korpusevärv: sinine
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90009
• Lisainfo: SW90009
• Additional information: SW90009

• Pressure [bar]: 1.8
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Lülituspunkt alates [bar]: 1,6
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: SWAG
• Name: SW 30 23 0001

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Required quantity: 1
• Colour: grey
• Pressure [bar]: 0.9
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Pressure [bar]: 1.4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Keermemõõt: M 10x1
• Korpusevärv: valge
• Surve (bar): 1,8
• Manufacturer: FAE

• Engine Code: KZ
• Pressure [bar]: 2
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Colour: white
• Pressure [bar]: 1.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: blue
• Shifting Points [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure [bar]: 0.25
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Piirangutega toode/piirangu info: koos tihendiga
• Keermemõõt: M10x1,0
• Lülitusulatus (bar): 0,15 - 0,35
• Värv: sinine
• Kaal (kg): 0,038
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 10x1
• Colour: brown
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 08.1986
• Surve (bar): 10,5
• Korpusevärv: hall
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Lisainfo: SW90007
• Additional information: SW90007

• Keermemõõt: M10x1,0
• Värv: valge
• Kaal (kg): 0,031
• Surve alates (bar): 0,7
• Surve (bar) kuni: 1
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KZ
• Construction Year from: 08.1986
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: brown
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Lülituspunkt alates [bar]: 1,2
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,5
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Värvimarkeering: must
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 30 23 0003
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Surve (bar): 16
• Korpusevärv: must
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90005
• Lisainfo: SW90005
• Additional information: SW90005

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: OLISURVELšLITUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lülituspunkt alates [bar]: 1,2
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,5
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Värvimarkeering: must
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: OLISURVELšLITUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M10x1,0
• Lülitusulatus (bar): 1,2 - 1,6
• Värv: must
• Kaal (kg): 0,028
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Lüliti funktsioon: avaja
• Värv: sinine
• Võtmekaugus: 24
• Keermemõõt: M10 x 1,0
• Pistikkontaktide arv: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: SWAG
• Name: SW 30 23 0004

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Lüliti funktsioon: Lukustaja
• Värv: valge
• Piirangutega toode/piirangu info: koos tihendiga
• Võtmekaugus: 24
• Keermemõõt: M10 x 1,0
• Pistikkontaktide arv: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: OLISURVELšLITUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Lüliti funktsioon: avaja
• Voolutugevus (A): 0,25
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Pistikkontaktide arv: 1
• Pistikute teostus: Lamepistik
• Vastab originaalosa värvile: sinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: Olisurvellitus
• Manufacturer: HEL

• Surve (bar): 20
• Korpusevärv: valge
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90060

• Observe technical data:
• Manufacturer: BOSCH