Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Lower, Front -
Lisainfo: AUDI 100 /
200 AVANT / QUA -
Additional information: AUDI 100 /
200 AVANT / QUA
Lisainfo: Rubber mount for wishbone, front
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
both sides, outer -
Name: Puks -
Kndmik VW P. A100 82- - Manufacturer: MAX
-
Vehicle Identification Number (VIN) to: 44-
M- 050 000 -
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Inner Diameter [mm]: 16
-
Outer Diameter [mm]: 24,
59 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 100, -91
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 100, -91
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Centre -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.09
-
Name: DY 37-
06125- 6 - Manufacturer: DYS
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 100, -91
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 100, -91
(kvaliteediklass: PJ)"
- Quantity per axle: 4
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
both sides, outer -
Name: Puks -
Kndmik VW P. A100 82- - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Lower Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 23
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 58
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. A100 82- - Manufacturer: MEY
-
Vehicle Identification Number (VIN) to: 44-
M- 050 000 - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.07
- Manufacturer: CORTECO
Fitting Position: Front Axle, Right, Left, outer, Front Axle Left, Front Axle Right
-
Fitting Position: Rear Axle,
both sides - Axle alignment required after fitting:
- Weight [kg]: 0.122
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Quantity per axle: 2
- Control/Trailing Arm Type: for trailing arm
- Weight [g]: 124
- Name: IM 1611
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: inner,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 58
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. A100 77- - Manufacturer: MEY
-
Fitting Position: Lower Front Axle,
inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle,
Right, Left, inner -
Vehicle Identification Number (VIN) to: 44-
M- 050 000 - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
- Weight [kg]: 0.27
- Manufacturer: CORTECO
- Thickness [mm]: 58
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 46.5,
22 -
Material: Rubber/
Metal -
Fitting Position: Lower Front Axle,
inner - Weight [kg]: 0.204
-
Name: Puks -
Kndmik VW P. A100 77- - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 58
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 46.5,
22 -
Material: Rubber/
Metal -
Fitting Position: Lower Front Axle,
inner - Weight [kg]: 0.245
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.34
-
Name: DY 37-
24836 - Manufacturer: DYS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks