• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: white
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system 55/65 C
• Additional information: Thermo switch for cooling system 55/65 C

• Number of pins: 2
• Colour: white
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Thread Size: M 22x1,5
• Spanner Size: 29
• Number of connectors: 2
• Plug Type: Blade Terminal
• Lisainfo: Thermo switch for fan 95-90 C
• Additional information: Thermo switch for fan 95-90 C

• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 85-80 C
• Additional information: Thermo switch for fan 85-80 C

• Model Year to: 1989
• Vehicle Identification Number (VIN) from: 89-H-300 001
• Block Separation:
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 3
• Switch Point [°C]: 118
• Colour: brown
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5
• Additional information: Thermo switch for cooling system 118 C, M14x1.5

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Sender for oil temperature
• Additional information: Sender for oil temperature

• Vehicle Equipment: for vehicles with air conditioning
• Construction Year from: 08.1989
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: blue
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: black/green
• Manufacturer: TOPRAN
• Lisainfo: 103 327 HP
• Additional information: 103 327 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 26906161
• Spanner Size: 19
• Housing Colour: white
• Manufacturer: KAMOKA

• for OE number: 025906041A
• Housing Colour: blue
• Manufacturer: KAMOKA

• Manufacturer: AIC
• Lisainfo: 51913 AIC
• Additional information: 51913 AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 14
• Thread Size: M10x1
• for OE number: 027919501
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.1988
• Manufacturer: FAE
• Additional information: NRF32110
• Lisainfo: NRF32110

• Construction Year to: 07.1989
• Plug Type: Blade Terminal
• Thread Size: M 10
• Switch Point [°C]: 120
• Number of pins: 1
• Colour Coding: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Thread Size: M22x1,5
• Colour: blue
• Number of pins: 2
• Connector Shape: angular
• Manufacturer: DELLO AUTOMEGA

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SB
• Number of pins: 3
• Switch Point [°C]: 120
• Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 3 pins
• Additional information: Sender for water temperature gauge 3 pins

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Connector Shape: angular
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 3
• Ühenduste arv: 2
• Manufacturer: 3RG

• Engine Code: RA
• Number of pins: 1
• Colour: black
• Thread Size: M10x1
• Spanner Size: 13
• Manufacturer: FACET

• Engine Code: RA
• Number of pins: 1
• Colour: black
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Name: EP 1.830.073
• Manufacturer: EPS

• Thread Size: M10x1.0
• Manufacturer: VERNET

• Thread Size: M 22 x 1,5
• Spanner Size: 29
• Number of pins: 2
• Plug Type: Blade Terminal
• Shut-off Point [°C]: 70
• Switch-on point [°C]: 75
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Manufacturer: ERA

• Thread Size: M 22 x 1,5
• Spanner Size: 29
• Plug Type: Blade Terminal
• Number of pins: 2
• Switch-on point [°C]: 85
• Shut-off Point [°C]: 80
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour Coding: white
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Connector Shape: angular
• Number of pins: 2
• Temperature range to [°C]: 120
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 80
• Shut-off Point [°C]: 75
• Plug Type: Blade Terminal
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Plug Type: Blade Terminal
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 2 pins
• Additional information: Sender for water temperature gauge 2 pins

• Thread Size: M 10
• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: white
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Läbimõõt [mm]: 20
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Height [mm]: 30
• Thread Size: M22x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Number of switch stages: 2
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 85, 92
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-84 C/102-91 C, 3 pins
• Additional information: Thermo switch for fan 95-84 C/102-91 C, 3 pins

• Colour: black
• Housing Colour: black
• Number of pins: 1
• Thread Size: M10X1
• Spanner Size: 14
• Name: DE TS10256
• Manufacturer: DELPHI

Manufacturer: FAE

• Construction Year from: 08.1989
• Connector Shape: round
• Colour Coding: grey
• Number of pins: 3
• Sensor Type: NTC Sensor
• Switch Point [°C]: 120
• Fitted Diameter [mm]: 20
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8AL000001
• Engine Code: SB
• Thread Size: 20 mm
• Manufacturer: VERNET

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Spanner Size: 29
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 37
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 22 x 1,5
• Number of pins: 3
• Connector Shape: angular
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Spanner Size: 29
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: SB
• Vehicle Identification Number (VIN) from: 8A-L-000001
• Number of pins: 2
• Colour: black
• Manufacturer: FACET

• Length [mm]: 29
• Thread Size: M22x1,5
• Switch Point [°C]: 70, 75
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Switch point from [°C]: 75
• Switch point to [°C]: 70
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1990
• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Manufacturer: ERA

• Engine Code: SB
• Vehicle Identification Number (VIN) from: 8A-L-000001
• Number of pins: 2
• Colour: black
• Name: EP 1.830.086
• Manufacturer: EPS

• Thread Size: M10x1,0
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Temperatuurivahemik kuni [°C]: 125
• Manufacturer: ERA

• External Thread Size: M10 x 1
• Number of connectors: 2
• Colour: white
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 6U0959481A
• Manufacturer: MEAT&DORIA

• Construction Year from: 04.1988
• Operating temperature from [°C]: 95
• Operating temperature to [°C]: 90
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Socket colour: blue
• Manufacturer: FAE ELEKTRYKA

• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: blue
• Switch Point [°C]: 95, 90
• Weight [kg]: 0.035
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: round
• Number of pins: 3
• Temperature range [°C]: 120
• for OE number: 053919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• for model code: For Cooling Fan
• Thread Size: M10*1
• Spanner Size: S22
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: DELPHI
• Name: DE TS10320

• Required quantity: 1
• Lülituspunkt [°C]: 84
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• External Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 3
• Colour Coding: grey
• Temperature range from [°C]: 95, 102
• Temperature range to [°C]: 84, 92
• Weight [kg]: 0.061
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 22x1,5
• Number of pins: 3
• Manufacturer: FAE ELEKTRYKA

• Engine Code: RA
• Number of pins: 2
• temperatuurivahemik alates [°C]: 95
• Temperatuurivahemik kuni [°C]: 90
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Name: EP 1.850.032
• Manufacturer: EPS

• Thread Size: M22x1,5
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Climate Zones: for hot climate zones
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 893959481
• Thread Size: M22x1.5
• Number of pins: 2
• Tightening Torque [Nm]: 35
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Packaging width [cm]: 3.3
• Packaging length [cm]: 3.5
• Net Weight [g]: 55
• Packaging height [cm]: 7.2
• Manufacturer: MAHLE
• Name: MH TSW9D

General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.

• Engine Code: RA
• Number of pins: 1
• Hoiatustemperatuur (°C): 120
• Keermemõõt: M10x1
• Võtmekaugus: 19
• Manufacturer: EPS

• for OE number: 191959481A
• Thread Size: M22x1.5
• Number of pins: 3
• Tightening Torque [Nm]: 50
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch-on point [°C]: 102, 95
• Shut-off Point [°C]: 84, 91
• Packaging width [cm]: 3.5
• Packaging length [cm]: 3.7
• Net Weight [g]: 62
• Packaging height [cm]: 7.2
• Manufacturer: MAHLE
• Name: MH TSW31

• Engine Code: SB
• Number of pins: 2
• Vehicle Identification Number (VIN) from: 8A-L-000001
• Hoiatustemperatuur (°C): 110
• Keermemõõt: M10x1
• Võtmekaugus: 22
• Name: EP 1.840.085
• Manufacturer: EPS

• Engine Code: RA
• Number of pins: 3
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Name: EP 1.850.635
• Manufacturer: EPS

• Thread Size: M22x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Switch point from [°C]: 98
• Switch point to [°C]: 93
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Opening Temperature [°C]: 120
• Number of pins: 2
• Thread Size: M10 x 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: RA
• Number of pins: 2
• Hoiatustemperatuur (°C): 65
• Keermemõõt: M10x1
• Võtmekaugus: 22
• Manufacturer: EPS

• Engine Code: SB
• Number of connectors: 3
• Colour: grey
• Switch Point [°C]: 120
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.