• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• Colour Coding: blue
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: white
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour: blue
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Engine Code: 3A
• Colour: blue
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Lisainfo: Sender for oil temperature
• Additional information: Sender for oil temperature

• Length [mm]: 46
• Thread Size: M10x1
• Spanner Size: 24
• Colour Coding: white
• Number of pins: 1
• Pressure [bar]: 1.8
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Engine Code: 3A
• Colour: blue
• Pressure [bar]: 0
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS
• Additional information: 1-800-108
• Lisainfo: 1-800-108

• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: blue
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Diameter [mm]: 3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Quantity: 1
• Colour Coding: white
• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Length [mm]: 46
• Weight [kg]: 0.03
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Number of connectors: 1
• Thread Length [mm]: 13
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• General Information: oil pressure switch
• Manufacturer: VIKA

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 0.4
• Manufacturer: FAE

• Construction Year from: 10.1988
• Switch Pressure [bar]: 0.4
• Thread Size: M10x1.0
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: AIC
• Lisainfo: 51913 AIC
• Additional information: 51913 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Colour Coding: blue
• Length [mm]: 46
• Weight [kg]: 0.031
• Required quantity: 1
• Control Range [bar]: 0,15 - 0,35
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Inner Diameter [mm]: 2.54
• Number of connectors: 1
• Thread Length [mm]: 13
• General Information: oil pressure switch
• Manufacturer: VIKA

• Pressure [bar]: 3.5
• Housing Colour: blue
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90009
• Lisainfo: SW90009
• Additional information: SW90009

• Pressure [bar]: 1.8
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Observe technical data:
• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch Pressure [bar]: 0.3
• Thread Size: M10x1.0
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Switch Pressure [bar]: 1.8
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Switch point from [bar]: 1.6
• Length [mm]: 46
• Switch point to [bar]: 2
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: white
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 1
• Switch pressure from [bar]: 0.15
• Switch pressure to [bar]: 0.43
• Thread Size: M 10x1
• Colour: black, brown
• Supplementary Article/Supplementary Info: with seal
• Spanner Size: 24
• Version: Neue Version
• Manufacturer: METZGER

• Construction Year from: 09.1988
• Switch Pressure [bar]: 1.4
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Pressure [bar]: 1.4
• Thread Size: M10 x 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Construction Year to: 08.1990
• Switch Pressure [bar]: 0.9
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Pressure [bar]: 0.9
• Thread Size: M10 x 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Thread Size: M 10x1
• Housing Colour: white
• Pressure [bar]: 1.8
• Manufacturer: FAE

• Engine Code: 3A
• Colour: white
• Pressure [bar]: 2
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Required quantity: 1
• Colour: blue
• Shifting Points [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Colour: white
• Pressure [bar]: 1.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure [bar]: 0.25
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M10x1,0
• Control Range [bar]: 0,15 - 0,35
• Colour: blue
• Weight [kg]: 0.038
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Thread Size: M 10x1
• Colour: brown
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 1.4
• Manufacturer: FAE

• Pressure [bar]: 10.5
• Housing Colour: grey
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Lisainfo: SW90007
• Additional information: SW90007

• Engine Code: 3A
• Colour: grey
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: brown
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Pressure [bar]: 16
• Housing Colour: black
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90005
• Lisainfo: SW90005
• Additional information: SW90005

• Length [mm]: 46
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: white
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 1987
• for model year: 1989
• Vehicle Identification Number (VIN) from: 89-H-300 001
• Pressure from [bar]: 0.75
• Pressure to [bar]: 1
• Combi Switch Function: Normally Open Contact
• Colour: grey
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Model Year to: 1989
• Vehicle Identification Number (VIN) from: 89-H-300 001
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Combi Switch Function: Normally Closed Contact
• Colour: blue
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: 3A
• Colour: black
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Model Year to: 1989
• Vehicle Identification Number (VIN) from: 89-H-300 001
• Pressure from [bar]: 1.6
• Pressure to [bar]: 2
• Combi Switch Function: Normally Open Contact
• Colour: white
• Supplementary Article/Supplementary Info: with seal
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Model Year to: 1989
• Vehicle Identification Number (VIN) from: 89-H-300 001
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Combi Switch Function: Normally Open Contact
• Colour: black
• Spanner Size: 24
• Thread Size: M10 x 1
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY
• Lisainfo: 1009190014
• Additional information: 1009190014

• Pressure [bar]: 20
• Housing Colour: white
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90060

• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Number of pins: 1
• Plug Type: Blade Terminal
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Olisurvellitus
• Manufacturer: HEL

• Engine Code: 3A
• Number of pins: 1
• Colour: blue
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

Manufacturer: FAE

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe technical data:
• Manufacturer: BOSCH

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M10x1
• Manufacturer: FAE

• Thread Size: M10X1
• Shifting Points [bar]: 0.3
• Working pressure to [bar]: 5
• Manufacturer: METZGER