Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Lower, Front, Rear - Roolimisliik: Õõtshoob
- vajaminev tükihulk: 4
-
Laagritüüp: Kummi-
metalllaager -
Lisainfo: AUDI,
VOLKSWAGEN -
Additional information: AUDI,
VOLKSWAGEN
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, taga - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount -
Material: Rubber/
Metal - Thickness [mm]: 46
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 39
- Manufacturer: MERTZ
Lisainfo: Rubber mount for wishbone, front, models with power steering
-
Fitting Position: Rear,
Front, Front Axle, both sides - Roolimisliik: õõtshoova jaoks
-
Name: Puks -
Kndmik VW P. A80/ PASS - Manufacturer: MAX
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 44
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 47,
37 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Sillamõõtmine pärast paigaldust vajalik:
- Läbimõõt [mm]: 54
- Roolimisliik: Õõtshoob
- Installatsiooni pool: Esisild
- tugevdatud variant:
-
Kaal (kg): 0,
145 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.15
-
Name: DY 37-
06032- 5 - Manufacturer: DYS
-
Installatsiooni pool: esisild paremal,
esisild vasakul, all, taga, ees - Kõrgus (mm): 44
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 38
- Piirangutega toode/piirangu info: ilma kinnituseta
- Sõidukivarustus: ilma roolivõimendita sõidukitele
- vajaminev tükihulk: 4
- soovitatav vahetada paarikaupa:
-
Name: Puks -
Kndmik VW P. A80/ PASSAT (KORONKA) - Manufacturer: MEY
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8A-
L- 045 001 -
Installatsiooni pool: ees,
taga, vasakul, paremal, all -
Kaal (kg): 0,
14 - valikuliselt:
- Kogupikkus [mm]: 44
-
Välisläbimõõt [mm]: 48,
37, 4 -
Siseläbimõõt [mm]: 10,
1 - Manufacturer: CORTECO
- Name: COC 21652145
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8A-
L- 045 001 -
Installatsiooni pool: ees,
taga, paremal, vasakul -
Kaal (kg): 0,
15 - valikuliselt:
- Manufacturer: CORTECO
- Name: COC 21652524
- Fitting Position: Front Axle
-
Laagritüüp: Kummi-
metalllaager - SVHC: SVHS aineid ei esine
- Manufacturer: FAG
-
Fitting Position: Front Axle,
inner -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 37,
4 - Laius (mm): 44
- SVHC: SVHS aineid ei esine
- Name: Puks
- Manufacturer: FAG
-
Fitting Position: Front Axle,
inner, in front of axle, Lower - Siseläbimõõt 1 [mm]: 10
- Välisläbimõõt 1 [mm]: 38
- Jämedus/Tugevus 1 (mm): 44
- Manufacturer: DELPHI
- Name: DE TD463W
-
Installatsiooni pool: esisild paremal,
esisild vasakul - Manufacturer: OCAP
- vana mudel:
- Jämedus/Tugevus (mm): 44
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 37,
47 -
Materjal: Kumm/
metall - Installatsiooni pool: esisild alla
-
Kaal (kg): 0,
143 -
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: FEB
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
-
Installatsiooni pool: all,
Esisild - vajaminev tükihulk: 4
-
Materjal: Kumm/
metall - Kaal (g): 159
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 38
- Pikkus (mm): 44
- Name: IM 2090
- Manufacturer: ORIGINAL IMPERIUM
- uus mudel:
- Pikkus (mm): 44
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 37
-
Materjal: Kumm/
metall -
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
12 -
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: FEB
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: Rubber/
Metal - Length from [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
- Name: Control arm bush left=right
- Quality class: PJ
Fitting Position: Front Axle, Lower, Front Axle Left, Front Axle Right
Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
- vana mudel:
- Jämedus/Tugevus (mm): 44
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 37,
5, 47 -
Materjal: Kumm/
metall - Installatsiooni pool: esisild alla
-
Kaal (kg): 0,
155 - Manufacturer: SWAG
- Name: SW 32 69 0008
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- uus mudel:
- Pikkus (mm): 44
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 37
-
Materjal: Kumm/
metall -
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
12 - Manufacturer: SWAG
- Name: SW 30 60 0036
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear,
Front, Front Axle both sides, Lower - Required quantity: 4
- paaris tootenumbrid: VKDS 331010
- Manufacturer: SKF
- Name: SK VKDS331010
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
- Quantity: 4
-
Vehicle Identification Number (VIN) to: 89-
J- 350 000, 89- J- 351 000, 8A- L- 045 000 -
Vehicle Identification Number (VIN) from: 89-
J- 351 001, 8A- L- 045 001 - Fitting Position: Front Axle both sides
- General Information: bonded rubber bush
- Manufacturer: VIKA
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Lower - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
- Height [mm]: 44
- Name: ALT 80988AL
- Manufacturer: ALTE AUTOMOTIVE
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
- Vehicle Equipment: for vehicles with power steering
-
Installatsiooni pool: ees,
taga, all - Kõrgus (mm): 44
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 37
- Piirangutega toode/piirangu info: ilma kinnituseta
- tugevdatud variant:
- vajaminev tükihulk: 2
- Hulk telje kohta: 2
- ainult paarina välja vahetada:
- Manufacturer: MEY
Üldine informatsioon: Reinforced rubber bushing with guaranteed longer lifetime Name: Puks - Kndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 48MM
-
Fitting Position: Front Axle Left,
Front Axle Right -
Installatsiooni pool: ees,
taga, all - Kõrgus (mm): 44
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 37,
5 - Piirangutega toode/piirangu info: ilma kinnituseta
- Sõidukivarustus: roolivõimendiga sõidukile
- tugevdatud variant:
- vajaminev tükihulk: 2
- ainult paarina välja vahetada:
- Manufacturer: MEY
Üldine informatsioon: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Puks - Kndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 55MM
-
Fitting Position: Rear,
Front, Front Axle, both sides - Roolimisliik: õõtshoova jaoks
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! -
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: LMI
- Required quantity: 8
-
Materjal: PU
(Polyurethan) -
Välisläbimõõt [mm]: 37,
5 -
Piirangutega toode/piirangu info 2: koos rasvakattega,
koos paigaldusjuhisega - Name: PUKS
- Manufacturer: TED
Fitting Position: Front Axle, Rear Axle, both sides, Lower, Front, Rear
-
Fitting Position: Lower Front Axle,
both sides, inner -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
vasak/paremroolimine: vasak-
/ parempoolse roolimise jaoks -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Manufacturer: TRW
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks