Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 4
- Colour Coding: green
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 4 pins
- Additional information: Sender for water temperature gauge 4 pins
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 7355021
- Manufacturer: KAMOKA
-
Fabrication Number: ECT-
AU- 008 - Number of pins: 4
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1100619
- Manufacturer: KAMOKA
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating voltage [V]: 12
-
Switch point from [°C]: 84,
91 -
Switch point to [°C]: 95,
102 - Spanner Size: 20
- Diameter [mm]: 20
- Supplementary Article/Info 2: without seal ring
- Colour: grey
- Number of pins: 4
- Manufacturer: JP GROUP
-
Lisainfo: Thermo switch for fan 95-
84/ 102- 91 C -
Additional information: Thermo switch for fan 95-
84/ 102- 91 C
-
Vehicle Identification Number (VIN) to: 4B-
5- 050 000 - Number of pins: 4
- Colour: green
- Manufacturer: DELLO AUTOMEGA
- Engine Code: ASN
- Number of connectors: 4
- Manufacturer: 3RG
- Housing Colour: black
- Number of pins: 4
- Spanner Size: 0
- Manufacturer: DELPHI
-
Name: DE TS10236-
12B1
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 4
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: not have
- Thread Size: not have
- Manufacturer: NISSENS
- Name: NI 207009
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Number of pins: 4
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 84,
91 - Number of switch stages: 2
- Connector Shape: D Shape
- Housing Colour: blue
- Fitted Diameter [mm]: 20
-
Article number of recommended accessories: 104 529,
107 319 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Colour: green
- Plug Type ID: 4
- Weight [kg]: 0.02
- Required quantity: 1
- Outer Diameter [mm]: 20
- Number of connectors: 4
- General Information: temperature sensor; green; 4 pins
- Manufacturer: VIKA
- Quantity: 1
- Supplementary Article/Info 2: with seal ring
- Housing Colour: blue
-
Switch Point [°C]: 90,
102 - Number of pins: 4
- General Information: thermal switch
- Manufacturer: VIKA
- Number of connectors: 4
- Connector Shape: round
- Thread Size: 20 mm
- Number of pins: 4
- Manufacturer: VERNET
- Colour Coding: green
- Connector Shape: oval
- Sensor Type: NTC Sensor
- Number of pins: 4
-
for OE number: 059 919 501A,
1 124 770 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: FEBI
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ASN
- Housing Colour: green
- Corresponds to the original part in colour: black
- Name: EP 1.830.258
- Manufacturer: EPS
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 4
- Colour: green
- Supplementary Article/Supplementary Info: with seal
- Quality: IAM
- Article number of recommended accessories: 0905458
- Power [W]: 0.06
- Manufacturer: METZGER
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
- Manufacturer: MEYLE
- Voltage [V]: 12
- Number of pins: 4
- Weight [kg]: 0.02
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with retaining spring,
with seal - Manufacturer: SWAG
- Name: SW 30 92 9318
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 4B-
Y- 000 001 - Number of pins: 4
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with clamp holder
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Mounting Type: Plugged
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
- Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
black - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107141
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Switch Point [°C]: 102,
90 - Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Housing Colour: blue
- Switch point from [°C]: 102
- Switch point to [°C]: 90
- Weight [kg]: 0.031
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 1
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Diameter [mm]: 25
- Length [mm]: 50
-
Weight [kg]: 0.02,
0.2 - Supplementary Article/Supplementary Info: with seal
- for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Supplementary Article/Supplementary Info: with seal
-
Temperature range from [°C]: 84,
91 -
Temperature range to [°C]: 95,
102 - Power [W]: 0.06
- Manufacturer: METZGER
- Thread Size: M22x1.5
- Number of pins: 3
- Tightening Torque [Nm]: 35
- Supplementary Article/Supplementary Info: with seal
-
Switch-on point [°C]: 102,
95 -
Shut-off Point [°C]: 84,
91 - Packaging width [cm]: 3.5
- Packaging length [cm]: 3.7
- Net Weight [g]: 57
- Packaging height [cm]: 7.2
- Manufacturer: MAHLE
General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
- Mounting Type: Plugged
- Supplementary Article/Supplementary Info: with seal
- Switch point from [°C]: 90
- Switch point to [°C]: 102
- Voltage [V]: 12
- Number of pins: 4
- Switch: for double thermal switch
-
Combi Switch Function: Dual Output,
Normally Open Contact - Plug Type: Blade Terminal
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6ZT181611081
- Manufacturer: HELLA
- Engine Code: ASN
- Name: EP 1.850.692
- Manufacturer: EPS
- Switch point from [°C]: 95
- Switch point to [°C]: 90
- Housing Colour: blue
- Manufacturer: FAE
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 4
- for OE number: 059919501A
- Supplementary Article/Info 2: with mounting parts