Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle both sides,
inner - Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front, inner -
Additional information: Wheel bearing,
front, inner
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 45
- Fitting Position: Front Axle
- Weight [kg]: 0.133
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Info 2: with crown nut,
with shaft seal, with nut - Full Set:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: KLP-
AU- 004 - Rim Size [inch]: 16.0
- Manufacturer: NTY
-
Name: NTY KLP-
AU- 004
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 43
- Width [mm]: 37
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Rear Axle - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Name: Rattalaagrikomplekt
- Manufacturer: MAX
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Rear Axle
- Required quantity: 2
- Parameter: DP2010.10.0095
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Quality class: PJ
- Name: Wheel bearing kit
-
Fitting Position: Front Axle both sides,
Front and Rear - Weight [kg]: 1.87
- Bolt Hole Circle Ø 1 [mm]: 112
- Warranty: 4 years warranty
- Name: CE 29SKV438
- Manufacturer: ESEN SKV
-
Fitting Position: Rear Axle,
Front Axle - Block Separation:
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Manufacturer: OPTIMAL
- Fitting Position: Front Axle
- Width [mm]: 37
- Weight [kg]: 0.84
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: METALCAUCHO
- Outer Diameter [mm]: 82
- Quantity Unit: Set
- Inner Diameter [mm]: 43
- Fitting Position: Front Axle
- Weight [kg]: 0.694
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for model year: 1996
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.765
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
- Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 82
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Manufacturer: GSP
Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right
- for model year: 1996
- Fitting Position: Rear Axle
- Weight [kg]: 0.965
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 11.2
- Packaging width [cm]: 8.6
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Trim Level: FRRE LR+FR
- Number of bores: 43
- Width [mm]: 37
- Diameter 2 [mm]: 1
- Name: DA KWD1060
- Manufacturer: DAYCO
- Fitting Position: Front Axle
-
Fabrication Number: KLP-
AU- 004K - Supplementary Article/Info 2: with wheel hub
- Outer Diameter 1 [mm]: 82
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: with attachment material,
with accessories - Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
-
Thread Size: M16x1,
5x77 - Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.036
-
Supplementary Article/Info 2: with screw,
with bolts/ screws, with nut - Supplementary Article/Supplementary Info: with motor shaft screw
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN): [;3B-
3- 450 000], [8D- T- 160956;] -
Fitting Position: Right,
Left, Front Axle -
Manufacturer: SNR /
NTN- SNR/ - Name: SN R157.11
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN): [;3B-
3- 450 000], [8D- T- 160956;] -
Fitting Position: Right,
Left, Front Axle - Manufacturer: SNR
- Name: SN R157.18
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: with retaining ring
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
-
Thread Size: M16x1,
5x77 - Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
-
Fitting Position: Right,
Left, Rear Axle - Manufacturer: SNR
- Name: SN R157.14
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks