• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Diameter [mm]: 20
• Number of pins: 4
• Lisainfo: Temperature sensor for cooling system, 4 pins
• Additional information: Temperature sensor for cooling system, 4 pins

• Number of connectors: 2
• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: Water level switch, washer
• Additional information: Water level switch, washer

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.013
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Component Number: 120-09-004
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Fabrication Number: ECT-AU-008
• Number of pins: 4
• Manufacturer: NTY

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-AU-027
• Manufacturer: NTY

• Colour: black
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0339
• Additional information: 21-0339

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• Number of pins: 2
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV555

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission

• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A 919 501 A
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Vehicle Identification Number (VIN) to: 8D-1-200 000
• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Engine Code: ALZ
• Number of connectors: 4
• Manufacturer: 3RG

• Quantity: 1
• Vehicle Identification Number (VIN) to: 8D-X-500 000
• Supplementary Article/Info 2: with seal ring
• Colour: blue
• Plug Type ID: 4
• Weight [kg]: 0.2
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; blue; 4 pins
• Manufacturer: VIKA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 059919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Transmission Type: Manual Transmission
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: MAX
• Lisainfo: 012409191D/MG
• Additional information: 012409191D/MG

• Production date from: 25.09.2000
• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Weight [g]: 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Colour: grey
• Sensor Type: Passive sensor
• for OE number: 71957147
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: METZGER

• Cable Length [mm]: 745
• Fabrication Number: ECP-AU-021
• Manufacturer: NTY

• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS
• Name: NI 207009

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 8D-Y-000 001
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 078 919 501 C
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Vehicle Identification Number (VIN) from: 8D-Y-000 001
• Colour: green
• Plug Type ID: 4
• Weight [kg]: 0.02
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Thread Size: 20 mm
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Colour Coding: green
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Number of pins: 4
• for OE number: 059 919 501A, 1 124 770
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8D-Y-000001
• Fitted Diameter [mm]: 20
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• for OE number: 06A 919 501
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Vehicle Identification Number (VIN) to: 8D-X-500 000
• Number of pins: 4
• Socket colour: dark green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059 919 501
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Vehicle Equipment: for vehicles with manual transmission
• Name: Andur,vahemaa
• Manufacturer: MD

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• Number of pins: 2
• Fitting Depth [mm]: 79
• Manufacturer: ERA

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Fitting Position: Front Axle
• General Information: distance sensor
• Manufacturer: VIKA

• Engine Code: ALZ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: F 8D-V-000 001
• Vehicle Identification Number (VIN) to: F 8D-X-500 000
• Engine Number from: M AHU 041 171
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Voltage [V]: 12
• Number of pins: 4
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 8D-Y-000 001
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Quantity: 1
• General Information: ambient air temperature sensor
• Manufacturer: BORSEHUNG

• Plug Type: Blade Terminal
• Operating Mode: Mechanical
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 2
• Connector Shape: rectangular, angled
• Mounting Type: Clipped
• Name: TEMPERATUURILšLITUS,KLIIMAVENTILAATOR
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 8D-Y-000 001
• Number of pins: 4
• Colour: green
• Supplementary Article/Supplementary Info: with seal
• Quality: IAM
• Article number of recommended accessories: 0905458
• Power [W]: 0.06
• Manufacturer: METZGER

• Thread Size: 20
• Number of pins: 4
• Manufacturer: ERA

• Housing Colour: black
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: DLP
• Lisainfo: TS10266
• Additional information: TS10266

• Vehicle Identification Number (VIN) from: 8D-V-000 001
• Vehicle Identification Number (VIN) to: 8D-X-500 000
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Length [mm]: 730
• Number of pins: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV265
• Manufacturer: ESEN SKV

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8D-X-500 000
• Number of pins: 4
• Housing Colour: blue
• Corresponds to the original part in colour: green, blue
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Cable Length [mm]: 745
• Number of connectors: 3
• Housing Colour: grey
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Vehicle Identification Number (VIN) to: 8E-2-400 000
• Vehicle Identification Number (VIN) from: 8E-3-000 001
• Cable Length [mm]: 740
• Resistor [kOhm]: 0.86
• General Information: impluse sender
• Manufacturer: VIKA

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: FAE

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 095927321C/MG
• Additional information: 095927321C/MG

• Quantity: 1
• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.