• Operating Mode: Mechanical
• Lisainfo: Switch for reversing light
• Additional information: Switch for reversing light

• Operating Mode: Electric
• Vehicle Equipment: for vehicles without xenon light
• Manufacturer: JP GROUP
• Lisainfo: Motor for headlamp levelling
• Additional information: Motor for headlamp levelling

• Connector Shape: oval
• Fabrication Number: EAG-VW-000
• Manufacturer: NTY
• Name: NTY EAG-VW-000

• Vehicle Identification Number (VIN) to: 8D-T-282000
• Connector Shape: angular
• Operating Mode: Mechanical, Manual (foot operated)
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8D-T-282000
• Thread Size: M12 x 1,5
• Operating Mode: Mechanical
• Number of pins: 2
• Combi Switch Function: Normally Closed Contact
• Housing Colour: white
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Operating Mode: Electric
• Number of pins: 4
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 8D-T-282001
• Block Separation:
• Connector Shape: angular
• Operating Mode: Mechanical, Manual (foot operated)
• Number of pins: 4
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: EWC-VW-001
• Manufacturer: NTY

• Operating Mode: Electric
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Brake light switch, 4 pins
• Additional information: Brake light switch, 4 pins

• Transmission Type: 6-Speed Manual Transmission
• Connector Shape: rectangular
• Mounting Type: Screw Connection
• Spanner Size: 22
• Number of pins: 2
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Mechanical
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: AFB
• Thread Size: M12x1,5
• Operating Mode: Mechanical
• Name: EP 1.810.087
• Manufacturer: EPS

• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.025
• for OE number: 4A0 945 515 A
• Manufacturer: SWAG
• Name: SW 32 92 3340

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Manual Transmission
• Required quantity: 1
• Thread Size: M14 x 1,5
• Fitting Position: at gearshift linkage
• Operating Mode: Mechanical, Electric
• Mounting Type: Plug-in connection, Bolted
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: angular
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.025
• for OE number: 4A0 945 515 A
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Thread Size: M14x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Quantity: 1
• Operating Mode: Electric
• Weight [kg]: 0.025
• Required quantity: 1
• Number of connectors: 4
• General Information: switch - brake light
• Manufacturer: VIKA

• Transmission Type: 6-Speed Manual Transmission
• Spanner Size: 19
• Number of connectors: 2
• Operating Mode: Mechanical
• Weight [kg]: 0.04
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Number of pins: 2
• Manufacturer: FAE

• Engine Code: AFB
• Transmission Type: 6-Speed Manual Transmission
• Thread Size: M14x1,5
• Spanner Size: 22
• Name: EP 1.860.099
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 8-E-200000
• Thread Size: M 14x1,5
• Transmission Code: MA, ME, MG, ML
• Number of pins: 2
• Socket colour: black
• Manufacturer: FAE

• Thread Size: M14 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Connector Shape: rectangular
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Engine Code: AFB
• Thread Size: M12x1,5
• Operating Mode: Mechanical
• Name: EP 1.810.126
• Manufacturer: EPS

• Engine Code: AFB, AKN
• Vehicle Identification Number (VIN) to: 8E 1 200 000
• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 65
• Width [mm]: 22
• Height [mm]: 22
• Weight [kg]: 0.042
• Thread Size: M14 x 1,5
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Control Type: Push control
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: angular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Mechanical
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Mechanical
• Number of pins: 4
• Manufacturer: FAE

• Mounting Type: Clipped
• Vehicle Equipment: for vehicles without trailer hitch
• Control Type: Tip Switch Control
• Supplementary Article/Info 2: with integrated relay
• Fabrication Number: EWS-AU-010
• Colour: black
• Shape: rectangular

• Vehicle Identification Number (VIN) to: 8D-T-282 000
• Operating Mode: Electric
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Number of pins: 2
• Combi Switch Function: Normally Closed Contact
• Plug Type: Round Plug
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Number of pins: 2
• Connector Shape: angular
• Transmission Type: 5-Speed Manual Transmission
• Lisainfo: Switch for reversing light and air condition
• Additional information: Switch for reversing light and air condition

• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.1998
• Number of connectors: 7
• Manufacturer: JP GROUP
• Lisainfo: Switch, hazard light
• Additional information: Switch, hazard light

• Vehicle Equipment: for vehicles with accelerator pedal sensor
• Operating Mode: Electric
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Number of pins: 4
• Combi Switch Function: Changeover Switch
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD008622351

• Transmission Type: 6-Speed Manual Transmission
• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Thread Size: Mx14x1,5
• Spanner Size: 22
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6ZF008621501

• Transmission Type: 5-Speed Manual Transmission
• Connector Shape: rectangular
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Cable Length [mm]: 400
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 12.1998
• Voltage [V]: 12
• Number of pins: 7
• Weight [kg]: 0.06
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Quantity: 1
• Weight [kg]: 0.1
• Required quantity: 1
• Cable Length [mm]: 360
• Number of connectors: 2
• General Information: switch for reversing light; single hole
• Manufacturer: VIKA

• Number of connectors: 9
• Fabrication Number: EWS-AU-012
• Manufacturer: NTY
• Name: NTY EWS-AU-012

• Construction Year from: 05.1998
• Number of connectors: 9
• Control Type: Push control

Vehicle Equipment: for vehicles without trailer hitch, for vehicles with navigation system

• Vehicle Identification Number (VIN) to: 8D-X-199 999
• Number of pins: 7
• Manufacturer: AIC

Vehicle Equipment: for vehicles with trailer hitch, for vehicles without trailer hitch General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 05.1998
• Number of connectors: 9
• Lisainfo: Switch, hazard light
• Additional information: Switch, hazard light

Vehicle Equipment: for vehicles without trailer hitch, for vehicles with navigation system

• Transmission Type: 5-Speed Manual Transmission
• for OE number: 012 919 823 F
• Length [mm]: 48
• Width [mm]: 85
• Height [mm]: 420
• Weight [kg]: 0.113
• Required quantity: 1
• Number of pins: 2
• Control Type: Push control
• Combi Switch Function: Normally Open Contact
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Connector Shape: angular
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 9
• Weight [kg]: 0.06
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 36SKV706
• Manufacturer: ESEN SKV

• Construction Year from: 05.1998
• Colour: black/red
• Colour Code: 01C
• Fitting Position: Dashboard
• Control Type: Tip Switch Control
• Switch Lighting: red
• Vehicle Equipment: for vehicles without trailer hitch
• Supplementary Article/Info 2: with integrated relay
• Mounting Type: Clipped
• Shape: triangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 5-Speed Manual Transmission
• Number of connectors: 2
• Cable Length [mm]: 360
• Weight [kg]: 0.1
• Supplementary Article/Info 2: with cable
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AFB
• Transmission Type: 5-Speed Manual Transmission
• Name: EP 1.860.195
• Manufacturer: EPS

• Transmission Type: 4-Speed Automatic Transmission
• Vehicle Identification Number (VIN) from: 8D-T-090001
• Connector Shape: D Shape
• Number of pins: 7
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 5-Speed Manual Transmission
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with trailer hitch
• Number of connectors: 9
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 8D-X-200 000
• Colour: black
• Vehicle Equipment: for vehicles without trailer hitch
• Number of pins: 9
• Control Type: Push control
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 8D-X-200 000
• Colour: black
• Vehicle Equipment: for vehicles with trailer hitch
• Number of pins: 10
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 05.1998
• Number of connectors: 7
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• General Information: hazard waring swith
• Manufacturer: BORSEHUNG

• Vehicle Equipment: for vehicles without trailer hitch
• Housing Colour: black
• Number of connectors: 9
• Colour: red
• Control Type: Tip Switch Control
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Transmission Type: 6-Speed Manual Transmission
• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Connector Length [mm]: 30
• Combi Switch Function: Normally Open Contact
• Thread Size: M14x1,5
• Operating Mode: Electric
• Spanner Size: 22
• Connector Shape: angular
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Transmission Type: 5-Speed Automatic Transmission
• Vehicle Identification Number (VIN) from: 8D-Y-200001
• Length [mm]: 135
• Width [mm]: 135
• Height [mm]: 60
• Weight [kg]: 0.195
• Combi Switch Function: Transmission Mode (automatic/manual)
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 5-Speed Automatic Transmission
• Number of pins: 8
• Length [mm]: 101
• Fitting Position: at gearshift linkage
• Width [mm]: 113
• Height [mm]: 34
• Weight [kg]: 0.193
• Connector Shape: round
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.