• Engine Code: AKN, AFB
• Vehicle Identification Number (VIN) from: 8D-W-240001
• Block Separation:
• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Thread Size: M 22x1,5
• Spanner Size: 29
• Number of connectors: 2
• Plug Type: Blade Terminal
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-90 C
• Additional information: Thermo switch for fan 95-90 C

• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Engine Code: AFB
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Engine Code: AFB
• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 1
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• for OE number: 049919563B
• Manufacturer: KAMOKA
• Lisainfo: 4080049 KAMOKA
• Additional information: 4080049 KAMOKA

• Construction Year from: 03.1999
• Manufacturer: AIC
• Lisainfo: 51913 AIC
• Additional information: 51913 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fabrication Number: ECT-AU-008
• Number of pins: 4
• Manufacturer: NTY

• for OE number: 1100619
• Manufacturer: KAMOKA

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 8D-Y-020 000
• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating voltage [V]: 12
• Switch point from [°C]: 84, 91
• Switch point to [°C]: 95, 102
• Spanner Size: 20
• Diameter [mm]: 20
• Supplementary Article/Info 2: without seal ring
• Colour: grey
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-84/102-91 C
• Additional information: Thermo switch for fan 95-84/102-91 C

• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Thread Size: M22x1,5
• Colour: blue
• Number of pins: 2
• Connector Shape: angular
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Connector Shape: angular
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Engine Code: AFB
• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8DW240001
• Number of connectors: 4
• Manufacturer: 3RG

• Quantity: 1
• Vehicle Identification Number (VIN) to: 8D-X-500 000
• Supplementary Article/Info 2: with seal ring
• Colour: blue
• Plug Type ID: 4
• Weight [kg]: 0.2
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; blue; 4 pins
• Manufacturer: VIKA

• Construction Year to: 05.1998
• Vehicle Identification Number (VIN) to: 8D_W_240000
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 059919501
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Construction Year to: 05.1998
• Vehicle Identification Number (VIN) to: 8DW240000
• Thread Size: 20 mm
• Manufacturer: VERNET
• Additional information: WS2605 VERNET
• Lisainfo: WS2605 VERNET

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10236-12B1

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 06.1999
• Colour Coding: green
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring, with bracket
• for OE number: 059 919 501
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8D_W_240001
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Spanner Size: 29
• for OE number: 811959481
• Manufacturer: KAMOKA

• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8DW240001
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS
• Name: NI 207009

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Colour: grey
• Spanner Size: 29
• for OE number: A0015403045
• Manufacturer: KAMOKA

• Engine Code: AFB
• Housing Colour: blue
• Temperature range to [°C]: 180
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: EP 1.830.093
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 078 919 501 C
• Manufacturer: MEAT&DORIA

• Construction Year from: 02.1999
• Block Separation:
• Vehicle Equipment: for vehicles with air conditioning
• Construction Year to: 12.1998
• Number of pins: 4
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Number of switch stages: 2
• Connector Shape: D Shape
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Article number of recommended accessories: 104 529, 107 319
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Vehicle Identification Number (VIN) from: 8D-Y-000 001
• Colour: green
• Plug Type ID: 4
• Weight [kg]: 0.02
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Quantity: 1
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• Switch Point [°C]: 90, 102
• Number of pins: 4
• General Information: thermal switch
• Manufacturer: VIKA

• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8DW240001
• Thread Size: 20 mm
• Number of pins: 4
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 8D-W-240001
• Colour Coding: green
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Number of pins: 4
• for OE number: 059 919 501A, 1 124 770
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Lisainfo: Thermo switch for fan 95-84 C/102-91 C, 3 pins
• Additional information: Thermo switch for fan 95-84 C/102-91 C, 3 pins

• Vehicle Identification Number (VIN) to: 8D-W-240 000
• Number of pins: 4
• Socket colour: dark green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059 919 501
• Manufacturer: MEAT&DORIA

• Height [mm]: 30
• Weight [kg]: 0.057
• Thread Size: M22x1,5
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 8D-V-000 001
• Number of pins: 2
• Vehicle Equipment: for vehicles without automatic climate control
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AFB
• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.1998
• Vehicle Identification Number (VIN) to: 8DW240000
• Housing Colour: dark green
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10279

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Engine Code: AFB
• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AFB
• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8D_W_240001
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: EP 1.830.258
• Manufacturer: EPS

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: blue
• Shut-off Point [°C]: 95, 97
• Switch Point [°C]: 90, 102
• for OE number: 8D0 959 481B
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 4
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Spanner Size: 29
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Number of switch stages: 2
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 85, 92
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 29
• Thread Size: M22x1,5
• Switch Point [°C]: 70, 75
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Switch point from [°C]: 75
• Switch point to [°C]: 70
• Weight [kg]: 0.066
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8D-Y-020 000
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191 959 481 C
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Thread Size: M 22 x 1,5
• Number of pins: 3
• Connector Shape: angular
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Spanner Size: 29
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.1998
• Vehicle Identification Number (VIN) to: 8DW240000
• Connector Shape: rectangular
• Material: Brass
• Number of pins: 4
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Vehicle Identification Number (VIN) to: 8D-Y-020 000
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• Thread Size: M10x1 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 059 919 563
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 8D-W-240001
• Number of pins: 4
• Colour: green
• Supplementary Article/Supplementary Info: with seal
• Quality: IAM
• Article number of recommended accessories: 0905458
• Power [W]: 0.06
• Manufacturer: METZGER

• Thread Size: 20
• Number of pins: 4
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 191 959 481 A
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Switch point from [°C]: 102, 95
• Switch point to [°C]: 90, 97
• Manufacturer: ERA

• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Manufacturer: MEYLE

• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.077
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: blue
• Switch Point [°C]: 95, 90
• Weight [kg]: 0.035
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Engine Code: AFB
• Construction Year to: 05.1998
• Vehicle Identification Number (VIN) to: 8D_W_240000
• Colour: blue
• Corresponds to the original part in colour: blue
• Name: EP 1.830.260
• Manufacturer: EPS

• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8DW240001
• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8D-W-240 000
• Number of pins: 4
• Housing Colour: blue
• Corresponds to the original part in colour: green, blue
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Housing Colour: black
• Thread Size: M10x1.0
• Number of connectors: 2
• Temperature range to [°C]: 170
• Manufacturer: DELPHI

• Thread Size: M10 x 1,0/ SW 19
• Number of pins: 2
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10 x 1
• Number of pins: 2
• Manufacturer: ERA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AFB
• Number of pins: 2
• Temperature range from [°C]: 95
• Temperature range to [°C]: 90
• Thread Size: M22x1,5
• Spanner Size: 29
• Name: EP 1.850.032
• Manufacturer: EPS

• Engine Code: AFB
• Housing Colour: black
• Temperature range to [°C]: 170
• Thread Size: M10x1
• Spanner Size: 19
• Name: EP 1.830.255
• Manufacturer: EPS

• Required quantity: 1
• Switch Point [°C]: 84
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 8D-W-240 001
• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with clamp holder
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 06.1998
• Vehicle Identification Number (VIN) from: 8D_W_240001
• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107141

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Temperature range to [°C]: 170
• External Thread Size: M10 x 1
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 90, 97
• Thread Size: 20 mm
• Sensor Type: Open-style sensor
• Manufacturer: VERNET