Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Installatsiooni pool: esisild mõlemapoolselt
- Hammastehulk: 45
- Siseläbimõõt [mm]: 77
- Välisläbimõõt [mm]: 81
- Laius (mm): 11
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Seerianumber: HCA-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
-
Resistor [Ohm]: 1,
700 - for OE number: 8E0927803B
- Number of mounting bores: 1
- Manufacturer: MAGNETI MARELLI
- Name: MM MWSS029
- Fitting Position: Front Axle
- Cable Length [mm]: 990
- Sensor Type: Passive sensor
- for OE number: 8E0927803B
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Construction Year to: 12.2006
- Fitting Position: Front Axle
- Sensor Type: Inductive Sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
015 -
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Vehicle Equipment: for vehicles with headlight levelling
(automatic) - Fitting Position: Rear Axle Left
-
Cable Length [mm]: 1,
190 - Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- Sensor Type: Passive sensor
- Number of pins: 2
- Cable Length [mm]: 957
-
Fitting Position: Front Axle Right,
Front Axle Left - Name: SE DS0086
- Manufacturer: AUTOFREN SEINSA
-
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Type: Inductive Sensor
-
Lisainfo: ABS sensor,
front, left/ right -
Additional information: ABS sensor,
front, left/ right
- Fitting Position: Front Axle
- Sensor Type: Inductive Sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
005 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 001 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Block Separation:
- Vehicle Equipment: for vehicles with dynamic bending light
- Sensor Type: Hall Sensor
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Fitting Position: Front Axle
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle Left
- Quantity: 1
-
Vehicle Equipment: for vehicles with headlight levelling
(automatic) - Sensor Type: Passive sensor
- Number of occupied pins: 6
-
Name: DE SS21339-
12B1 - Manufacturer: DELPHI
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- for OE number: 4B0927803E
- Manufacturer: KAMOKA
- Installatsiooni pool: Esisild
- Pikkus (mm): 975
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
15 - Värv: must
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Sensor Type: Passive sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
372 - Name: SE DS0030
- Manufacturer: AUTOFREN SEINSA
-
Quantity: 1,
2 - Kaablipikkus (mm): 1 197
- Installatsiooni pool: Tagasild
- Üldine informatsioon: ABS speed sensor; rear
- Manufacturer: VIKA
- Block Separation:
- Fitting Position: Rear Axle Right
-
Cable Length [mm]: 1,
197 - Sensor Type: Passive sensor
- Manufacturer: KAMOKA
Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 4
-
Cable Length [mm]: 1,
035 - Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20197
- Quality class: PJ
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 001 -
Fitting Position: Rear Axle both sides,
Rear Axle Right, Rear Axle -
Required quantity: 2,
1 - Block Separation:
- Vehicle Equipment: for vehicles with dynamic bending light
- Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
-
for PR number: 8Q0,
8Q3, 8Q1 -
Resistor [Ohm]: 1,
650 -
Cable Length [mm]: 1,
360 -
Sensor Type: Hall Sensor,
Passive sensor - Number of pins: 2
- Weight [kg]: 0.138
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Installatsiooni pool: Tagasild
- Pikkus (mm): 1 385
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
17 - Rakendustüüp: elektriline
- Pistiku värv: must
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
34 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 96SKV136
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.121
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild vasakul
- Kaablipikkus (mm): 1 400
- Anduritüüp: passiivne andur
- Pistikkontaktide arv: 2
- Manufacturer: ERA
- Fitting Position: Rear Axle
- Quantity: 2
-
Vehicle Equipment: for vehicles with headlight levelling
(mechanical) -
for PR number: 8Q0,
8Q1 - Sensor Type: Passive sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
370 - Manufacturer: DELPHI ELEKTRONIKA
- Quality class: PJ
- Name: ABS sensor
-
Vehicle Equipment: for vehicles with headlight levelling
(automatic) - Fitting Position: Rear Axle Left
- Sensor Type: Inductive Sensor
-
Length [mm]: 1,
400 - Braking/Drive Dynamics: for vehicles with ABS
- Number of pins: 2
- Manufacturer: FAE
-
Vehicle Identification Number (VIN): [8E-
3- 400001;], [8E- 4- 000 001;], [8E- 4- 000001;] -
Fitting Position: Right,
Left, Front Axle -
Cable Length [mm]: 1,
005 -
Manufacturer: SNR /
NTN- SNR/
-
for PR number: 8Q3,
8Q5 - Fitting Position: Rear Axle Right
- Sensor Type: Passive sensor
-
Length 1 [mm]: 1,
345 - Length 2 [mm]: 920
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear Axle Left
-
Vehicle Equipment: for vehicles with headlight levelling
(automatic) - Supplementary Article/Info 2: with control unit for aut. LDR
- Kaablipikkus (mm): 1 190
- Manufacturer: METZGER
-
Vehicle Identification Number (VIN): [8E-
5- 000001;] -
Fitting Position: Right,
Left, Rear Axle -
Cable Length [mm]: 1,
429 - Manufacturer: SNR
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks