Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Suspension: for vehicles with bad road version
- for PR number: 1BR
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Manufacturer: JP-
GROUP - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles with sports suspension
-
for PR number: 1BE,
1BV - Block Separation:
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Fitting Position: Front Axle
- Height [mm]: 94
- Manufacturer: JP GROUP
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
- Fitting Position: Front Axle
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 2
- Fitting Position: Front Axle
- Thickness [mm]: 80
- Weight [kg]: 0.04
- Required quantity: 2
- General Information: protective pipe; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- not for trim level: 1BA
- Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- for PR number: 1BA
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 810003410
Suspension: for vehicles with sports suspension, for vehicles with bad road version
- for OE number: 4D0412137B
- Fitting Position: Front Axle
- Height [mm]: 80
- Material: Plastic
- Weight [g]: 38
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 63
- Name: IM 37423
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Manufacturer: DELLO AUTOMEGA
- not for PR number: 1BA
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 85
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for PR number: 1BE,
1BV, 1BA - Block Separation:
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
- Additional information: FE36604
- Lisainfo: FE36604
Suspension: for vehicles with sports suspension, for vehicles with standard suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- reinforced version:
- Fitting Position: Front Axle
- Height [mm]: 85
- for OE number: 8D0412131F
- Manufacturer: SASIC
-
for PR number: 1BE,
1BV, 1BA - Block Separation:
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Name: SW 30 93 6604
- Manufacturer: SWAG
Suspension: for vehicles with sports suspension, for vehicles with standard suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1BA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 136
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
-
Material: PE
(Polyethylene) - Height [mm]: 157
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AVF
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- for PR number: 1BR
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 134
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with bad road version
- for PR number: 1BR
- Fitting Position: Rear Axle
- Material: Thermoplast
- Height [mm]: 157
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for PR number: 1BA
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1BA
-
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 94
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 85
- Manufacturer: OPTIMAL ZAWIESZENIE
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: SWAG
- Name: SW 30 93 6728
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 1BE,
1BV, 1BA - Block Separation:
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 160
- Weight [kg]: 0.037
- Manufacturer: VAICO
Suspension: for vehicles with sports suspension, for vehicles with standard suspension General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 8D0412131D
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane) - Weight [g]: 85
- Name: IM 37435
- Manufacturer: ORIGINAL IMPERIUM
- for combined PR number: 1BE+1BV
- Block Separation:
- for PR number: 1BR
- Width [mm]: 58
- Thickness [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: FEBI
Suspension: for vehicles with sports suspension, for vehicles with standard suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
-
for PR number: 1BD,
1BE, 1BV -
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 113
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Length [mm]: 135
- Weight [kg]: 0.105
- Required quantity: 2
- Weight [g]: 105
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Manufacturer: METALCAUCHO
-
Trim Level: 1BV,
1BE, 1BR -
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Manufacturer: LEMFORDER
Suspension: for vehicles with sports suspension, for vehicles with bad road version SVHC: No information available, please contact the manufacturer!
- Quantity: 2
- Fitting Position: Rear Axle
- Length [mm]: 135
- Weight [kg]: 0.09
- Required quantity: 2
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- General Information: helper spring; rear
- Manufacturer: VIKA
- Quantity: 2
- Fitting Position: Rear Axle
- Thickness [mm]: 134
- Weight [kg]: 0.09
- Required quantity: 2
- General Information: helper spring; rear
- Manufacturer: VIKA
- for OE number: 3B0512131H
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: PU
(Polyurethane) - Weight [g]: 146
- Thickness [mm]: 134
- Name: IM 37437
- Manufacturer: ORIGINAL IMPERIUM
-
Specification: Type:
universal - Diameter [mm]: 12
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Height [mm]: 100
- Fitting Position: Front Axle
- Diameter [mm]: 58
- Weight [kg]: 0.09
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Specification: Type:
universal - Diameter [mm]: 12
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Suspension: for vehicles with standard suspension
- for PR number: 1BR
- Thickness [mm]: 157
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1BR
- Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: VAICO
Suspension: for vehicles with standard suspension, for vehicles with bad road version General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Length [mm]: 135
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
-
for PR number: 1BE,
1BV - Block Separation:
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.1
- Manufacturer: FEBI BILSTEIN
- Additional information: FE18376
- Lisainfo: FE18376
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Length [mm]: 135
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Weight [kg]: 0.09
- Name: SW 30 91 8374
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: ZWT-
VW- 033SK - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 10.2004
- Fitting Position: Front Axle
- for OE number: 4D0412137C
- Manufacturer: KAMOKA AMORTYZATORY
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Thickness [mm]: 94
- Inner Diameter [mm]: 20.3
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Suspension: for vehicles with standard suspension
- for PR number: 1BR
- Thickness [mm]: 134
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Shape: round
- Name: CFD PK4761
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- for OE number: 3B0512131H
- Manufacturer: KAMOKA AMORTYZATORY
- Construction Year to: 10.2004
- Fitting Position: Rear Axle
- for OE number: 3B0512131H
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: JP GROUP
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Quantity: 2
- Fitting Position: Front Axle
- General Information: repair kit for shock absorber; front
- Manufacturer: VIKA
- Block Separation:
- for PR number: 1BR
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear
- General Information: rear strut bump stop
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle,
Front Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Name: CFD PK3302
- Manufacturer: DACO
- Fitting Position: Front Axle
- Name: MM APK0064
- Manufacturer: MAGNETI MARELLI
- for OE number: 3B0512131H
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Weight [g]: 289
- Component Number: 2
- Name: IM 51273
- Manufacturer: ORIGINAL IMPERIUM
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 202
- Component Number: 4
- Name: IM 50135
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0079
- Fitting Position: Rear Axle
- Shape: round
- Name: CFD PK4726
- Manufacturer: DACO
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Suspension: for vehicles with standard suspension
- Weight [g]: 189
- Component Number: 4
- Version: Standard
- Name: IM 50140
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with standard suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0068
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: AUTOFREN REPERATURKI
-
Name: SE D5-
096 - Additional information: D5096
- Lisainfo: D5096
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH - Name: GH 624704
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Manufacturer: KAYABA
- Name: KY 915708
- Additional information: 915708 KYB
- Lisainfo: 915708 KYB
- for OE number: 8E0512137E
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 287
- Component Number: 4
- Name: IM 50141
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
- Fitting Position: Rear Axle
- Manufacturer: AUTOFREN REPERATURKI
-
Name: SE D5-
012
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- for OE number: 4B0512137B
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 311
- Component Number: 4
- Name: IM 50507
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Name: KY 910116
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY 910225
- Fitting Position: Front Axle
- Weight [kg]: 0.3
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY 910224
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Length [mm]: 135
- Width [mm]: 18
- Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 001 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 000 - Fitting Position: Front Axle
- Height [mm]: 94
- Suspension: for vehicles with standard suspension
- for PR number: 1BA
- Quantity per axle: 1
- Manufacturer: SKF
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- not for trim level: 1BA
- Quantity per axle: 1
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Weight [kg]: 0.253
- Suspension: for vehicles with standard suspension
- Packaging length [cm]: 13.4
- Packaging width [cm]: 10.1
- Packaging height [cm]: 6.7
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- for OE number: 3B0512131H
-
Name: SE D5-
226 - Manufacturer: AUTOFREN SEINSA
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 000 - Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
149835
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Weight [kg]: 0.4
- Shape: round
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE