• Number of pins: 2
• Colour: black
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: ALT
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: ALT
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-AU-003
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 058 905 161 B
• Manufacturer: KAMOKA

• Number of pins: 2
• Connector Shape: D Shape
• Colour: black
• Number of mounting bores: 1
• Fitting Depth [mm]: 44
• for OE number: 06B 905 379 D
• Manufacturer: MEAT&DORIA

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Thread Size: 12 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10520

• Quantity: 1
• General Information: intake air temperature sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 2
• Weight [kg]: 0.012
• for OE number: 06B 905 379 D
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• for OE number: 058905161B
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Manufacturer: FAE
• Additional information: NRF33227
• Lisainfo: NRF33227

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MEY

• Voltage [V]: 12
• Number of pins: 3
• Name: Andur,steimpulss
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Info 2: with connector parts
• Colour: black
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 4
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• for OE number: 06B906051
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Housing Colour: black
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,6 05-
• Manufacturer: BRM

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.45
• Measuring Range to [V]: 4.55
• Number of connectors: 4
• Manufacturer: VERNET

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Fabrication Number: EPP-AU-011
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Quantity: 1
• Cable Length [mm]: 670
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Number of pins: 4
• Pressure from [kPA]: 21
• Manufacturer: DELPHI
• Name: DE PS10177

• Fitting Position: before catalytic converter
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Quantity: 1
• Cable Length [mm]: 460
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Construction Year from: 11.2004
• Weight [kg]: 0.28
• Warranty: 3 years warranty
• Name: CE 07SKV155
• Manufacturer: ESEN SKV

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Cable Length [mm]: 800
• Number of pins: 3
• Housing Colour: green
• Manufacturer: FAE

• for OE number: 06B133471A
• Manufacturer: KAMOKA

• Engine Code: ALT
• Required quantity: 1
• Housing Colour: blue
• Length [mm]: 570
• Name: EP 1.957.048
• Manufacturer: EPS

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Engine Code: ALT
• Required quantity: 1
• Housing Colour: green
• Length [mm]: 800
• Name: EP 1.957.060
• Manufacturer: EPS

• Colour: blue
• Cable Length [mm]: 540
• Number of pins: 3
• Weight [kg]: 0.105
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Cable Length [mm]: 570
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Engine Code: ALT
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year from: 11.2004
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 253814

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front, after catalytic converter
• Quantity: 1
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Alternatively:
• Cable Length [mm]: 2
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: ALT
• Number of pins: 3
• Colour: blue
• Manufacturer: VDO

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 760
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 800
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: ALT
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Transmission Type: Manual Transmission
• Fitting Position: after catalytic converter
• Cable Length [mm]: 954
• Lambda Sensor: Planar probe, Heated
• Name: DE ES20169-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 720
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06C906262, 06C906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Overall Length [mm]: 750
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10624-12B1

• Quantity: 1
• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• Overall Length [mm]: 1,760
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Construction Year from: 11.2004
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 368003

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: ALT
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Service exchange part:
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 1,510
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV852