• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: ATE
• Vehicle Identification Number (VIN) to: L102678
• Length [mm]: 330
• Number of wear indicators [per axle]: 2
• Net weight [kg]: 0.04

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 67.5
• Width [mm]: 88
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 16.6 mm
• Additional information: Brake pad set, rear, 16.6 mm

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 250
• Brake Type: Disc Brake

• Quantity per packing unit: 10
• Brake Type: Disc Brake
• Fitting Position: Front Axle both sides
• Length [mm]: 250
• Supplementary Article/Info 2: with protection hose
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Length [mm]: 250
• Brake Type: Disc Brake
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Length [mm]: 250
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width 1 [mm]: 87.6
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Test Mark: ECE R90
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 66.9
• Brake System: LUCAS/TRW
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Width [mm]: 88
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Thickness [mm]: 15.8
• Height [mm]: 66.8
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: TRW
• Width [mm]: 87
• Thickness [mm]: 16.5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 66.8
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 67
• Wear Warning Contact: excl. wear warning contact
• Vibration: without vibration damper
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 16.5
• Width [mm]: 87
• Height [mm]: 66.8
• Brake System: LUCAS / TRW
• Weight [kg]: 0.85
• Manufacturer: TOMEX BRAKES

• Construction Year to: 07.1993
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 88
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• WVA Number: 21144
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Name: VA 302340
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.1993
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301463

• Fitting Position: Rear Axle
• Construction Year to: 01.1994
• Quantity per packing unit: 4
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21144
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP451

• Length [mm]: 87
• Width [mm]: 67
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Weight [kg]: 0.957
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Name: SW 30 91 6144
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.5
• Length [mm]: 87.1
• Height [mm]: 66.6
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Pad: Without Bevelled Edges
• Brake System: TRW
• WVA Number: 20668, 21144
• Name: SK VKBP90606
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Article number of recommended accessories: 1987474106, 1987474939, 1987474253
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21144
• Thickness [mm]: 15.1
• Width [mm]: 87
• Height [mm]: 66.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Thickness [mm]: 14
• Height [mm]: 44
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01025/181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 66.9
• Brake System: LUCAS/TRW
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: PROFIPOWER

• Brake System: ATE
• for brake disc thickness [mm]: 25
• for brake disc diameter [mm]: 310
• Length [mm]: 107.2, 100
• Width [mm]: 66, 61
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.5, 16.5
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.38
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 87.6
• Height [mm]: 67.5
• Thickness [mm]: 16.6
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Brake System: Lucas
• Weight [kg]: 0.8
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355017951
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 67.5
• Thickness [mm]: 16.6
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Brake System: Lucas
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 193
• Thickness [mm]: 17
• Height [mm]: 68
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21144
• Name: BR P 85 013
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-01075/075
• MAPP code available:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: LUCAS-GIRLING
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Height [mm]: 66
• Width [mm]: 107.2
• Thickness [mm]: 16.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width 1 [mm]: 107.2
• Height 1 [mm]: 66.2
• Thickness 1 [mm]: 17.8
• Width 2 [mm]: 100
• Height 2 [mm]: 61.1
• Thickness 2 [mm]: 16.8
• Brake System: ATE
• Test Mark: E9 90R-02A1162/0429
• MAPP code available:
• Article number of recommended accessories: 24.8190-0105.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Vehicle Identification Number (VIN) to: L102678
• Quantity per packing unit: 2
• Length [mm]: 330
• Supplementary Article/Supplementary Info: Axle Kit