Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thickness [mm]: 4
- Inner Diameter [mm]: 32
- Colour: black
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 4
- Inner Diameter [mm]: 32
- Colour: black
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.001
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 3.65
- Weight [kg]: 0.001
- Inner Diameter [mm]: 19.6
- Manufacturer: METALCAUCHO
- Inner Diameter [mm]: 32
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
Fabrication Number: CTM-VW-068
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cooling Hose: from distributor to auxiliary water pump
- Weight [kg]: 0.045
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 06.2007
- Fitting Position: Upper
-
Transmission Type: Semi-
automatic - Colour: black
- Hose Length [mm]: 495
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year from: 06.2007
- Fitting Position: Upper
- Transmission Type: Manual Transmission
- Colour: black
- Hose Length [mm]: 460
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Inner Diameter [mm]: 31
- Cooling Hose: from radiator to water pipe
- Fitting Position: Upper
- Weight [kg]: 0.229
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 30.5
- Cooling Hose: from distributor to engine cooler
- Fitting Position: Upper
- Weight [kg]: 0.227
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 30.5
- Cooling Hose: from distributor to engine cooler
- Weight [kg]: 0.272
- Name: SW 33 10 2180
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 06.2007
- Fitting Position: Lower
-
Transmission Type: Manual Transmission,
Semi- automatic - Block Separation:
- for OE number: 3C0122051BK
- Colour: black
- Hose Length [mm]: 805
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Inner Diameter [mm]: 31
- Outer Diameter [mm]: 39
- Cooling Hose: from engine to engine cooler
- Weight [kg]: 0.225
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 8P-
7- 190 000 - Transmission Type: Manual Transmission
- Block Separation:
-
Vehicle Identification Number (VIN) from: 8P-
7- 190 001 -
for PR number: 8Z4,
8Z5, 8Z7, 8Z6, 8Z9 - Cooling Hose: from distributor to engine cooler
- Fitting Position: Upper Left
- Article number of recommended accessories: 4010119
- Manufacturer: METZGER
Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Vehicle Identification Number (VIN) from: 8P-
7- 190001 -
Transmission Type: Dual-
Clutch Transmission - Heating/Cooling: for vehicles with standard heating
- Block Separation:
-
for PR number: 8Z4,
8Z5, 8Z7 -
Fitting Position: Radiator,
Upper Left - Manufacturer: METZGER
Vehicle Equipment: for vehicles with air conditioning, for vehicles without trailer hitch Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Quantity: 1
- Construction Year to: 05.2006
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Quantity: 1
- Construction Year from: 05.2006
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- for OE number: 03G121065AC
- Weight [g]: 426
- Name: IM 80362
- Manufacturer: ORIGINAL IMPERIUM
- Inner Diameter [mm]: 30.5
- Cooling Hose: from distributor to engine cooler
- Fitting Position: Lower
- Weight [kg]: 0.399
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.4
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV756
- Material: Plastic
- General Information: coolant pipe; plastic
- Manufacturer: VIKA
- Fitting Position: Upper Right
- Weight [g]: 740
- Length [mm]: 445
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 30
- Manufacturer: IMPERGOM