• Construction Year from: 01.2007
• Number of pins: 2
• Thread Size: M12x1,5
• Manufacturer: JP GROUP
• Lisainfo: Switch for reversing light
• Additional information: Switch for reversing light

• Vehicle Identification Number (VIN) to: 8P-6A 094 000, 8P-6B 009 600
• Block Separation:
• Operating Mode: Mechanical
• Number of pins: 4
• Left-/right-hand drive vehicles: for left-hand drive vehicles

• Operating Mode: Electric
• Vehicle Equipment: for vehicles without xenon light
• Version: AL/BOSCH/MAGNETI MA.
• Manufacturer: JP GROUP A/S
• Lisainfo: Motor for headlamp levelling
• Additional information: Motor for headlamp levelling

• Mounting Type: Bolted
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• General Information: switch for reversing light
• Manufacturer: VIKA

• Weight [kg]: 0.03
• Number of connectors: 2
• Required quantity: 1
• External Thread [mm]: M12 x 1,5
• Spanner Size: 22
• General Information: switch for reversing light
• Manufacturer: VIKA

• Fabrication Number: ECW-AU-002
• Manufacturer: NTY

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Mechanical
• Number of pins: 4
• Manufacturer: FAST

• Engine Code: BYT
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Operating Mode: electronically controlled
• General Information: switch - brake light
• Manufacturer: VIKA

• Engine Code: BYT
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.860.215
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 8P-6A094000, 8P-6B009600
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Operating Mode: Mechanical, Manual (foot operated)
• Number of pins: 4
• for OE number: 6Q0 945 511
• Mounting Type: Bayonet
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Name: LšLITI,TAGURDUSTULI
• Manufacturer: VER

• Transmission Type: Manual Transmission
• Spanner Size: 22
• for OE number: 02K 945 415 K
• Number of pins: 2
• Thread Size: M12x1,5
• Name: LšLITI,TAGURDUSTULI
• Manufacturer: MAX

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Operating Mode: Mechanical
• Number of pins: 4
• for OE number: 1K2945511
• Manufacturer: MEAT & DORIA

• Colour Coding: black/grey
• Operating Mode: Electric
• Weight [kg]: 0.36
• Number of connectors: 4
• Width [mm]: 37
• Height [mm]: 35
• Length [mm]: 90
• General Information: switch - brake light
• Manufacturer: VIKA

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Operating Mode: Mechanical
• Number of pins: 4
• for OE number: 6Q0945511
• Manufacturer: MEAT&DORIA

• Engine Code: BYT
• Housing Colour: black/white
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.034
• for OE number: 1K2 945 511 RDW
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P_6A094000, 8P_6B009601
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Housing Colour: black
• Operating Mode: Mechanical
• Manufacturer: FACET

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P_6A094000, 8P_6B009601
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Housing Colour: black
• Operating Mode: Mechanical
• Name: PIDURITULELšLITI
• Manufacturer: EPS

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P_6A094001, 8P_6B009601
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Housing Colour: black
• Operating Mode: Mechanical
• Manufacturer: FACET

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P_6A094001, 8P_6B009601
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Housing Colour: black
• Operating Mode: Mechanical
• Name: PIDURITULELšLITI
• Manufacturer: EPS

• Operating Mode: Mechanical
• Supplementary Article/Info 2: with mounting manual
• Housing Colour: white
• Manufacturer: FAE

• Vehicle Identification Number (VIN) to: 8P-6A094 000, 8P-6B009 600
• Block Separation:
• Operating Mode: Mechanical
• Number of pins: 4
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Shape: round
• Version: IAM
• Manufacturer: METZGER

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P-6B009600
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with mounting manual
• Housing Colour: black
• Manufacturer: FAE

• Model Year to: 2007
• Block Separation:
• Vehicle Identification Number (VIN) from: 8P-6A094 001, 8P-6B009 601
• Operating Mode: Manual (foot operated)
• Combi Switch Function: Changeover Contact
• Observe the vehicle manufacturer specifications:
• Number of pins: 4
• Name: PIDURITULELšLITI
• Manufacturer: MEY

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• for OE number: 1C0 945 511 A
• Length [mm]: 90
• Width [mm]: 35
• Height [mm]: 30
• Weight [kg]: 0.032
• Operating Mode: Mechanical, Manual (foot operated)
• Colour: green
• Material: Plastic
• Mounting Type: Plug-in connection
• Number of pins: 4
• Combi Switch Function: Normally Open Contact
• Housing Colour: green
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8P-6A094 000, 8P-6B009 600
• Block Separation:
• Model Year to: 2007
• Operating Mode: Manual (foot operated)
• Combi Switch Function: Changeover Contact
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Observe the vehicle manufacturer specifications:
• Number of pins: 4
• Name: PIDURITULELšLITI
• Manufacturer: MEY

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) to: 8P_6A094000, 8P_6B009601
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 4
• Combi Switch Function: Normally Open Contact
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966691

• Engine Code: BYT
• Housing Colour: black/white
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.034
• for OE number: 1K2 945 511 RDW
• Name: SW 30 10 4351
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2007
• Number of pins: 2
• Thread Size: M 12x1,5
• Corresponds to the original part in colour: brown, grey
• Manufacturer: METZGER

• Operating Mode: Mechanical
• Number of pins: 4
• Combi Switch Function: Normally Closed Contact, Normally Open Contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fabrication Number: ECW-VW-001
• Number of pins: 4
• Operating Mode: Mechanical
• Manufacturer: NTY
• Name: NTY ECW-VW-001

• Engine Code: BYT
• Length [mm]: 90
• Width [mm]: 37
• Height [mm]: 35
• Weight [kg]: 0.36
• Colour: black/white
• Operating Mode: Manual (foot operated), Electric, Mechanical
• Number of pins: 4
• Combi Switch Function: Changeover Contact
• Colour Coding: black/grey
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Manual (foot operated)
• General Information: switch - brake light
• Manufacturer: BORSEHUNG

• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Thread Size: M12x1,5
• Operating Mode: Electric
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Construction Year from: 01.2007
• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI
• Name: MM CI51030

• Operating Mode: Automatic
• General Information: switch-brake light
• Manufacturer: BORSEHUNG

• Engine Code: BYT
• Vehicle Identification Number (VIN) from: 8P_6A094001, 8P_6B009601
• Housing Colour: black
• Operating Mode: Electronic
• Manufacturer: FACET

• Engine Code: BYT
• Vehicle Identification Number (VIN) from: 8P_6A094001, 8P_6B009601
• Housing Colour: black
• Operating Mode: Electronic
• Name: PIDURITULELšLITI
• Manufacturer: EPS

• Housing Colour: black
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.02
• for OE number: 5G0 698 459
• Name: Piduritule lliti
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Fitting Position: at master cylinder
• Sensor Type: Hall Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with fastening clamp
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8P-6A094 000, 8P-6B009 600
• Block Separation:
• Operating Mode: Mechanical
• Number of pins: 4
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Shape: round
• Version: OE
• Manufacturer: METZGER

• Housing Colour: black
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.02
• for OE number: 5G0 698 459
• Name: SW 30 10 3335
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P-7-250000
• Vehicle Equipment: for vehicles without cruise control
• for OE number: 1K0 953 513 E
• Name: Tulede/kojameeste kangilliti
• Manufacturer: MAX

Combi Switch Function: with indicator function, with headlight flasher, with high beam function, with park light function

• Operating Mode: Mechanical
• Number of pins: 4
• for OE number: 5G0698459
• Name: Piduritule lliti
• Manufacturer: MD

• Vehicle Identification Number (VIN) from: 8P_6A094001, 8P_6B009601
• Operating Mode: Electric
• Mounting Type: Bolted
• Sensor Type: Hall Sensor
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD008622991

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Current carrying capacity [A]: 9
• Operating voltage [V]: 24
• for OE number: 1J6 943 021 B, 1JE 943 021, 1K8 943 021 C
• for article number: 70660022
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for PR number: 5C0
• Number of pins: 2
• Material: Plastic
• Connector Shape: angular
• Colour: black
• Mounting Type: Bayonet
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Combi Switch Function: with high beam function
• Light Function: with cornering light
• for OE number: 1K0953513E9B9
• Name: Tulede/kojameeste kangilliti
• Manufacturer: MD

• Engine Code: BYT
• Number of pins: 4
• Operating Mode: Mechanical
• Fitting Position: Footwell
• Connector Shape: oval
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year to: 2007
• Voltage [V]: 12
• Colour: black
• Number of pins: 5
• Name: TULEDE/KOJAMEESTE KANGILšLITI
• Manufacturer: MEY

Combi Switch Function: with rear wipe-wash function, with wipe-wash function, with wipe interval function Vehicle Equipment: for vehicles with controllable windscreen wiper intervals

• Voltage [V]: 12
• Colour: black
• Number of pins: 6
• Name: TULEDE/KOJAMEESTE KANGILšLITI
• Manufacturer: MEY

Combi Switch Function: with wipe interval function, with MFD, with wipe-wash function, with rear wipe-wash function Vehicle Equipment: for vehicles with controllable windscreen wiper intervals

• Number of pins: 4
• Sensor Type: Hall Sensor
• Fitting Position: Brake Booster, at master cylinder
• Operating Mode: Electric
• Manufacturer: METZGER

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: ******8P*7*250000
• Vehicle Equipment: for vehicles without cruise control
• Weight [kg]: 0.118
• Name: SUUNATULE LšLITI
• Manufacturer: FEB

Combi Switch Function: with indicator function, with headlight flasher, with high beam function, with park light function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year to: 2007
• Voltage [V]: 12
• Colour: black
• Vehicle Equipment: for vehicles without cruise control
• Number of pins: 4
• Name: TULEDE/KOJAMEESTE KANGILšLITI
• Manufacturer: MEY

Combi Switch Function: with park light function, with light dimmer function, with indicator function, with headlight flasher

• Number of pins: 4
• Combi Switch Function: with indicator function, with high beam function
• Manufacturer: ERA

• General Information: headlight flasher and parking light
• Manufacturer: VIKA

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: ******8P*7*250000
• Vehicle Equipment: for vehicles without cruise control
• Weight [kg]: 0.118
• Name: SW 30 93 6762
• Manufacturer: SWAG

Combi Switch Function: with indicator function, with headlight flasher, with high beam function, with park light function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2008
• Fitting Position: Left, Right
• Name: REGULAATOR,TULEDE KORGUSE REG.
• Manufacturer: MAG

• Colour: black
• Vehicle Equipment: for vehicles without cruise control
• Number of pins: 4
• Manufacturer: AIC

Combi Switch Function: with indicator function, with light dimmer function, with headlight flasher, with high beam function, with park light function General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BYT
• Vehicle Identification Number (VIN) to: 8P-7-250 000
• Length [mm]: 212
• Width [mm]: 80
• Height [mm]: 65
• Weight [kg]: 0.108
• Vehicle Equipment: for vehicles without cruise control
• Number of connectors: 4
• Manufacturer: VEMO

Combi Switch Function: with light dimmer function, with indicator function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.