• Quantity per packing unit: 10
• Charge Type: Exhaust Turbocharger
• Fitting Position: Lower
• Shape: O-Ring
• Outer Diameter [mm]: 14.5
• Inner Diameter [mm]: 9.5
• Thickness [mm]: 2.5
• Forward- /Backflow: for foreflow
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CDAA, BYT
• Thickness [mm]: 62
• Material: Steel
• Weight [kg]: 0.006
• Name: JULGESTUSSTOPPER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2007
• Construction Year to: 03.2013
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: Metal
• Colour: brown
• Thickness [mm]: 2.5
• Clamping Range from [mm]: 54
• Clamping Range up to [mm]: 62
• Manufacturer: GATES

• Quantity: 1
• Quantity per packing unit: 10
• Diameter [mm]: 53.5
• Fitting Position: Charge Air Hose
• Spring Clip Diameter [mm]: 52
• Weight [kg]: 0.005
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 73
• Material: Steel
• Weight [kg]: 0.008
• Name: JULGESTUSSTOPPER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CDAA
• Thickness [mm]: 71
• Material: Steel
• Weight [kg]: 0.007
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: GPP-VW-077
• Length [mm]: 100
• Manufacturer: NTY

• Turbocharger Line: Inlet
• General Information: throttle body hose; intake
• Manufacturer: BORSEHUNG

• Production date from: 01/04
• Production date to: 06/08
• Fitting Position: Outlet
• for OE number: 1K0145838G
• Manufacturer: SASIC

• Production date from: 06/06
• Fitting Position: Outlet
• for OE number: 1K0145838AG
• Manufacturer: SASIC

• for OE number: 1K0 145 828 AC
• Manufacturer: KAMOKA

• Valve type: Switch Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Fabrication Number: ECD-VW-034
• Manufacturer: NTY
• Name: NTY ECD-VW-034

• Fitting Position: Right, Upper
• Manufacturer: JP GROUP A/S
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Manufacturer: JP GROUP A/S
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Valve type: Switch Valve
• Operating Mode: Electric
• Fabrication Number: ECD-VW-039
• Manufacturer: NTY
• Name: NTY ECD-VW-039

• Fitting Position: Charge Air Cooler, Right
• Fabrication Number: GPP-VW-062

Lisainfo: VOLKSWAGEN GOLF VI 2009-2013 AUDI A3 2003-2013 SEAT LEON 2007-2012 SKODA OCTAVIA II 2004-2013 Additional information: VOLKSWAGEN GOLF VI 2009-2013 AUDI A3 2003-2013 SEAT LEON 2007-2012 SKODA OCTAVIA II 2004-2013

• General Information: pressure hose
• Manufacturer: VIKA

• Operating Mode: Electric
• Valve type: Solenoid Valve
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 1K0 145 832 AS
• Manufacturer: KAMOKA

• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 41
• Fitting Position: Upper Right
• Material: Rubber with fabric lining
• Compression ring material: Stainless Steel
• Weight [kg]: 0.139
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Exhaust Turbocharger, Outlet
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Fitting Position: Right Rear
• Length [mm]: 100
• Colour: black
• Material: ACM (Polyacrylate)
• Cooling Hose: Turbocharger to piping, Hot Side
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 55
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV047
• Manufacturer: ESEN SKV

• Length [mm]: 100
• Inner Diameter 1 [mm]: 54
• Turbocharger Line: Hot Side
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Fitting Position: Right, engine sided
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 01.2007
• Construction Year to: 03.2013
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: ACM (Polyacrylate)
• Colour: black
• Hose Length [mm]: 100
• Inner Diameter 1 [mm]: 47.5
• Inner Diameter 2 [mm]: 54.5
• Observe broschure:
• Manufacturer: GATES

• Charge Type: Exhaust Turbocharger
• Alternative Repair Kit: KTE000465
• Slim Set:

• Charge Type: Exhaust Turbocharger
• Manufacturer: JP GROUP
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• General Information: pressure hose
• Manufacturer: VIKA

Slim Set:

• General Information: pressure hose
• Manufacturer: VIKA

• Fitting Position: Charge Air Cooler, Left
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: GPP-VW-061
• Manufacturer: NTY

Lisainfo: VOLKSWAGEN GOLF VI 2009-2013 AUDI A3 2004-2012 SEAT LEON 2006-2012 SKODA OCTAVIA II 2004-2013 Additional information: VOLKSWAGEN GOLF VI 2009-2013 AUDI A3 2004-2012 SEAT LEON 2006-2012 SKODA OCTAVIA II 2004-2013

• Construction Year from: 01.2007
• Construction Year to: 03.2013
• Turbocharger Line: Cold Side, Piping to engine block
• Material: ACM (Polyacrylate)
• Colour: black
• Hose Length [mm]: 140
• Inner Diameter 1 [mm]: 64.5
• Inner Diameter 2 [mm]: 57
• Observe broschure:
• Manufacturer: GATES

• Charge Type: Exhaust Turbocharger
• Manufacturer: JP GROUP
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Fitting Position: Upper, Right
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Valve type: Solenoid Valve
• for OE number: 037906283C
• Name: Klapp,ohujuhtimine-ohuvott
• Manufacturer: MD

• for OE number: 1K0 145 834 AM
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 355
• Outer Diameter 1 [mm]: 69
• Outer Diameter 2 [mm]: 70
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Fabrication Number: GPP-VW-107
• Manufacturer: NTY
• Name: NTY GPP-VW-107

• Engine Code: BYT, CDAA
• Block Separation:
• Construction Year from: 07.2008
• Cooling Hose: Piping 1 to charge air cooler
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• General Information: pressure hose
• Manufacturer: VIKA

• Engine Code: CDAA
• Number of connectors: 2
• Operating Mode: Electric-pneumatic
• Valve type: Switch Valve
• Weight [kg]: 0.072
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 355
• for OE number: 1K0 145 834 AM
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter 1 [mm]: 69
• Outer Diameter 2 [mm]: 70
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Cooling Hose: Charge air cooler to engine
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• for OE number: 1K0 145 770 AH
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Material: Plastic, GRP (Glass fibre Reinforced Plastic)
• Pipe Diameter [mm]: 60
• Consult accessories list for recommended additional repairs:
• Turbocharger Line: Charge air cooler to intake manifold
• Manufacturer: TOPRAN

Supplementary Article/Info 2: without sensor, with bore for sensor, without bolts/screws, without rubber mount(s) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left Front
• Cooling Hose: Charge air cooler to piping, Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.44
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV053

• Fitting Position: Charge Air Cooler, Right
• Supplementary Article/Supplementary Info: with gaskets/seals
• Hose Type: Moulded Hose
• Supplementary Article/Info 2: with quick couplers
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pressure hose
• Manufacturer: VIKA

• Forward- /Backflow: Return Line
• Name: PRZEWàD SMAR. TURBOSPR¨½ARKI VW 1,8TSI PASSAT/GOLF
• Manufacturer: DRM

• Engine Code: BYT, BZB, CDAA
• Block Separation:
• only in connection with: 70-41369-00
• Name: Montaa§ikomplekt, kompressor
• Manufacturer: REI

• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: ELRING

for OE number: 06J 145 701 B, 06J 145 701 G, 06J 145 701 H, 06J 145 701 J, 06J 145 701 L, 06J 145 701 P, 06J 145 701 R, 06J 145 701 T, 06J 145 702 C, 06J 145 702 F, 06J 145 702 K, 06J 145 713 A, 06J 145 713 D, 06J 145 713 F, 06J 145 713 K, 06J 145 713 T, 06J 145 722 B, 5303970-0112, 5303970-0123, 5303970-0134, 5303970-0136, 5303970-0160, 5303980-0112, 5303980-0123, 5303980-0134, 5303980-0136, 5303980-0160, 5303988-0112, 5303988-0123, 5303988-0134, 5303988-0136, 5303988-0160, 5303990-0112, 5303990-0123, 5303990-0134, 5303990-0136, 5303990-0160

• Construction Year to: 04.2007
• Turbocharger Line: Piping to charge air cooler, Hot Side
• Fitting Position: Right Front
• Colour: black
• Material: ACM (Polyacrylate)
• Cooling Hose: Piping to charge air cooler, Hot Side
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Guarantee: 3 years guarantee
• Weight [kg]: 0.5
• Hose Length [mm]: 310
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV020
• Manufacturer: ESEN SKV

• Length [mm]: 243
• Inner Diameter 1 [mm]: 59
• Inner Diameter 2 [mm]: 54
• Turbocharger Line: Cold Side
• Manufacturer: NRF

• for OE number: 1K0145770AH
• Name: Laadimisohu voolik
• Manufacturer: MD

• Engine Code: BYT, BZB, CDAA
• for OE number: 06F145771D
• Forward- /Backflow: Supply Line
• Manufacturer: MAX

Name: PRZEWàD SMAR. TURBOSPR¨½ARKI SEAT ALHAMBRA TFSI 16V 12-

• Production date from: 01/04
• Production date to: 06/08
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 1K0145834AM
• Manufacturer: SASIC

• Charge Type: Exhaust Turbocharger
• Alternative Repair Kit: KT111860E, KTE000465
• Name: Montaa§ikomplekt, kompressor
• Manufacturer: FIS

• General Information: intake air duct
• Manufacturer: VIKA

• Material: Plastic
• Fitting Position: Centre
• Weight [kg]: 0.53
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Alternatively:

• Fitting Position: Charge Air Cooler, Outlet
• Turbocharger Line: Hot Side
• for OE number: 1K0145832AS
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with bulb
• General Information: pressure hose；plastic
• Manufacturer: BORSEHUNG

• General Information: pressure hose
• Manufacturer: VIKA

• General Information: pressure hose
• Manufacturer: VIKA

• for OE number: 1K0145832AS
• Name: Laadimisohu voolik
• Manufacturer: MD

• for OE number: 1K0145834N
• Weight [g]: 433
• Plug connector manufacturer: HENN
• Length [mm]: 280
• Inner Diameter 1 [mm]: 59
• Inner Diameter 2 [mm]: 54
• Name: IM 221925
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1K0145770N
• Weight [g]: 508
• Name: IM 223863
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower Left
• Compression ring material: Stainless Steel
• Material: Rubber with fabric lining
• Weight [kg]: 0.413
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2007
• Construction Year to: 03.2013
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: ACM (Polyacrylate)
• Colour: black
• Hose Length [mm]: 310
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Observe broschure:
• Manufacturer: GATES

• Construction Year from: 01.2007
• Construction Year to: 03.2013
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 260
• Inner Diameter 1 [mm]: 59
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Manufacturer: GATES

Manufacturer: METALCAUCHO

• Engine Code: BYT, BZB, CDAA
• Block Separation:
• Construction Year from: 07.2008
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: AJU

• Material: Stainless Steel
• Manufacturer: NISSENS