Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: BAT
- Required quantity: 8
- Quantity per packing unit: 4
- for OE number: 1WT318110
- Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- Name: DN K20TT
- Manufacturer: DENSO
- Lisainfo: K20TT DENSO
- Additional information: K20TT DENSO
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 8
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 3
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242240593
- Lisainfo: 0242240593 BOSCH
- Additional information: 0242240593 BOSCH
- Engine Code: BAT
- Required quantity: 8
- Quantity per packing unit: 10
-
for OE number: 101-
000- 033AA - Connector type: Removable SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 3 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- Manufacturer: DENSO
- Engine Code: BAT
- Quantity: 8
-
Spark Plug: 2 -
Earthed Electrode - Weight [kg]: 0.044
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BAT
- Required quantity: 8
- Quantity per packing unit: 10
- for OE number: 7700500168
- Connector type: Removable SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 2 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- Name: DN K20TXR
- Manufacturer: DENSO
- Lisainfo: K20TXR DENSO
- Additional information: K20TXR DENSO
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188705071
- Manufacturer: HELLA
- Required quantity: 8
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1.6
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RC8QMC
- Spark Position [mm]: 5
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 3.5
- Name: CH OE218
- Manufacturer: CHAMPION
Spark Plug: 4 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Required quantity: 8
- Electrode Gap [mm]: 1.6
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 5
- Number of pins: 4
- Manufacturer: BOSCH
- Name: BS 0242235715
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Required quantity: 8
- Electrode Gap [mm]: 0.7
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 4
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242240653
- Engine Code: BAT
- Required quantity: 8
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Platinum Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- Manufacturer: DENSO
- Name: DN IK20TT
- Lisainfo: IK20TT DENSO
- Additional information: IK20TT DENSO
- Required quantity: 8
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1.6
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Spark Plug: 4 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 FGR-
6 KQU - Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Manufacturer: BERU
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3.8
- Name: NG BKR6EQUA
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 4 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks