Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Right
- for OE number: 079906265
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 800
- Number of pins: 4
- Weight [g]: 131
- Gross Weight [g]: 164
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"
- Fitting Position: Left
-
for OE number: 022906262CF,
022906262BM - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 525
- Number of pins: 4
- Weight [g]: 112
- Gross Weight [g]: 145
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
TOURAN (1T1, 1T2, 1T
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
TOURAN (1T1, 1T2, 1T
(kvaliteediklass: Q)"
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV909
- Construction Year from: 03.2007
-
Lambda Sensor: Diagnostic Probe,
Finger probe -
Fitting Position: Left,
Right, after catalytic converter - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Fitting Position: after catalytic converter
- Cable Length [mm]: 816
-
Lambda Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20374-
12B1
- Resistor [Ohm]: 9
- Conductor Number: 4
- Length [mm]: 721
- Number of circuits: 4
- Cable Length [mm]: 721
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Fitting Position: Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Thread pre- greased -
Fabrication Number: ESL-
HY- 520 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
- Voltage [V]: 12
- Cable Length [mm]: 935
- Number of pins: 2
- Warranty: 3 years warranty
- Weight [kg]: 0.1
- Operating Mode: Electric
- Manufacturer: SKV GERMANY
- Warranty: 3 years warranty
- Weight [kg]: 0.1
- Manufacturer: SKV GERMANY
- Engine Code: BHK
- Fitting Position: Right
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BHK
-
Fitting Position: Right Front,
after catalytic converter - Required quantity: 1
- Length [mm]: 480
- Cable Length [mm]: 750
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.235
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Construction Year from: 03.2007
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
Left, Right - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Fitting Position: Left
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Fitting Position: Left Front
- Connector Shape: D Shape
- for OE number: 022 906 262 BQ
- Weight [kg]: 0.141
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 590
- Socket colour: black
- Number of circuits: 4
- Length [mm]: 720
- Number of pins: 4
-
Lambda Sensor: Planar probe,
Diagnostic Probe, Thread pre- greased - Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 50
- Cable Length [mm]: 728
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: NRF
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.2
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV423
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
-
Fitting Position: Right,
before catalytic converter - Housing Colour: black
- Lambda Sensor: Regulating Probe
- Length [mm]: 750
- Number of pins: 5
- Manufacturer: JP GROUP
- Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
-
Emission Standard: Euro 4
(D4) - for PR number: 7GG
- Number of connectors: 2
-
Fitting Position: before soot particulate filter,
Left - Weight [kg]: 0.07
- for OE number: 07Z 906 088 A
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Emission Standard: Euro 4
(D4) - for PR number: 7GG
- Number of connectors: 2
- Fitting Position: before soot particulate filter
- Weight [kg]: 0.07
- for OE number: 059 906 088 C
- Name: SW 30 94 9263
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
-
Emission Standard: Euro 4
(D4) - for PR number: 7GG
- Number of connectors: 2
- Fitting Position: before soot particulate filter
- Weight [kg]: 0.07
- for OE number: 059 906 088 C
-
Name: ANDUR,
HEITGAASITEMPERATUUR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
-
Emission Standard: Euro 4
(D4) - for PR number: 7GG
- Number of connectors: 2
-
Fitting Position: before soot particulate filter,
Left - Weight [kg]: 0.07
- for OE number: 07Z 906 088 A
- Manufacturer: SWAG
- Name: SW 30 94 9262
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right Front,
after catalytic converter - Required quantity: 1
- Lambda Sensor: Diagnostic Probe
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PA358066421
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
- Construction Year from: 03.2007
-
Lambda Sensor: Regulating Probe,
Heated - Resistor [Ohm]: 4.9
- Length [mm]: 800
- Conductor Number: 5
- Number of circuits: 5
- Cable Length [mm]: 800
- Manufacturer: MAGNETI MARELLI
- Fitting Position: before catalytic converter
-
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 750
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.17
- Manufacturer: VALEO
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
-
Fitting Position: Left Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Quantity: 1
- Cable Length [mm]: 615
-
Name: DE ES21368-
12B1 - Manufacturer: DELPHI
-
Fitting Position: Left Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Cable Length [mm]: 331
-
Name: DE ES21069-
12B1 - Manufacturer: DELPHI
- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
- Engine Code: BHK
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
- Length [mm]: 800
- Name: Lambda andur
- Manufacturer: MAX
-
Fitting Position: Right,
before catalytic converter, Left -
Lambda Sensor: Regulating Probe,
Heated - Block Separation:
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 6
- Cable Length [mm]: 805
- Weight [kg]: 0.121
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Left Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Required quantity: 1
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: BHK
-
Fitting Position: Left Front,
before catalytic converter - Required quantity: 1
- Colour: grey
- Length [mm]: 750
- Cable Length [mm]: 735
- Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Name: EP 1.998.374
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Construction Year from: 03.2007
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Warranty: 5 years warranty
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Fitting Position: before catalytic converter
-
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 700
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.146
- Name: VA 368224
- Manufacturer: VALEO
- Construction Year from: 03.2007
- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 287
- Manufacturer: BOSCH
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Warranty: 3 years warranty
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Fitting Position: Front
- Lambda Sensor: Finger probe
- General Information: lambda probe; front
- Manufacturer: VIKA
- Construction Year from: 03.2007
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Left - Number of circuits: 5
- Overall Length [mm]: 750
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Fitting Position: Right,
before catalytic converter - Construction Year from: 03.2007
- Lambda Sensor: Regulating Probe
- Length [mm]: 800
- Number of pins: 6
- Socket colour: black
- Manufacturer: FAE
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 735
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.19
- Name: VA 368403
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Construction Year from: 03.2007
- Fitting Position: before soot particulate filter
- Cable Length [mm]: 931
- Manufacturer: BOSCH
- Construction Year from: 03.2007
-
Fitting Position: Left,
Right - Block Separation:
- Lambda Sensor: Diagnostic Probe
- Number of circuits: 4
- Cable Length [mm]: 750
- Manufacturer: METZGER
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 50
- Cable Length [mm]: 338
- Thread Size: M14x1.5
- for OE number: 07Z906088
- Supplementary Article/Supplementary Info: with synthetic grease