Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber -
Additional information: Protective Cap/
Bellow, shock absorber
- for PR number: 1BA
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
- Additional information: FE36604
- Lisainfo: FE36604
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1BA
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Name: SW 30 93 6604
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 1BV,
1BL, 1BQ -
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
Suspension: for vehicles with sports suspension, for vehicles with electronic suspension control General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
for PR number: 1BL,
1BQ, 1BV - Block Separation:
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Manufacturer: FEBI BILSTEIN
- Additional information: F22142
- Lisainfo: F22142
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- Length [mm]: 205
- Weight [kg]: 0.065
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: 1BL,
1BQ, 1BV - Block Separation:
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Name: SW 30 92 2142
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Front Axle
- Material: Thermoplast
- Weight [kg]: 0.07
- Required quantity: 2
-
Outer Diameter [mm]: 68,
80 - General Information: protective pipe; front
- Manufacturer: VIKA
- for PR number: 1BA
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 160
- Weight [kg]: 0.037
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle
- Height [mm]: 206
- for OE number: 6N0413175A
- Manufacturer: SASIC
- for OE number: 6N0413175A
- Fitting Position: Front Axle
- Height [mm]: 193
- Material: Thermoplast
- Weight [g]: 64
- Diameter 1 [mm]: 63.6
- Diameter 2 [mm]: 74
- Name: IM 37485
- Manufacturer: ORIGINAL IMPERIUM
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Name: SW 30 93 6006
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [kg]: 0.108
- Packaging length [cm]: 19
- Packaging width [cm]: 7.8
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Suspension Strut
- Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles without sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Suspension Strut
- Name: CFD 560240
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.69
- Bore Ø [mm]: 30
- Piston Rod Diameter [mm]: 12.4
- Article number of recommended accessories: MK426A
- Packaging length [cm]: 50.5
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: CFD 450240
- Manufacturer: DACO
- Suspension: for vehicles without sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
- Name: KY 349048
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: KAYABA
- Name: KY 335813
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Thread Size: M14x1.5
- Piston Rod Length [mm]: 194
- Piston Rod Diameter [mm]: 25
- Suspension Strut Outer Diameter [mm]: 55
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE36/
25X134A - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 412 2039/
S, 100 412 2039, 100 640 0009 - replacement in pairs recommended:
- Manufacturer: MEYLE
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SEOV30/
13X180A -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: SACHS
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top yoke,
Bottom eye - Shock Absorber System: Electronically adjustable shock strength
- Spring Type: for vehicles with coil spring suspension
- Braking/Drive Dynamics: for vehicles with Magnetic Ride
- Suspension: for vehicles with electronic suspension control
-
Fabrication Number: A-
AU- 007 - Manufacturer: NTY