• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Thickness [mm]: 6.2, 7.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.012
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Bearing Type: Tapered Roller Bearing
• Name: Rattalaager
• Manufacturer: MAX

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Seerianumber: KLT-AU-001
• Manufacturer: NTY
• Name: NTY KLT-AU-001

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Bearing Type: Roller Bearing
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Laius 1 (mm): 14
• Laius 2 (mm): 16
• Välisläbimõõt 1 [mm]: 50
• Välisläbimõõt 2 [mm]: 45
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Required quantity: 2
• Parameter: DP2010.10.0088
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with crown nut, with shaft seal, with nut
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Piirangutega toode/piirangu info 2: koos võllitihendiga
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 39
• Width [mm]: 37
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Välisläbimõõt 1 [mm]: 50
• Laius 1 (mm): 14
• Laius 2 (mm): 15
• Välisläbimõõt 2 [mm]: 45
• Kaal (kg): 0,34
• Manufacturer: A.B.S.

• Siseläbimõõt 1 [mm]: 19
• Välisläbimõõt 1 [mm]: 45
• Laius 1 (mm): 15
• Siseläbimõõt 2 (mm): 29
• Välisläbimõõt 2 [mm]: 50
• Laius 2 (mm): 16
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Height [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

Alternative Repair Kit: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal
• Seerianumber: KLP-AU-002
• Manufacturer: NTY
• Name: NTY KLP-AU-002

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 30 85 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Rear Axle
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Manufacturer: SNR
• Name: SN R157.12

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 19.1
• Outer Diameter 1 [mm]: 45.2
• Width 1 [mm]: 16.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6102 40 FAG
• Additional information: 713 6102 40 FAG

• Vehicle Identification Number (VIN) from: 8C-P-224 840
• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Outer Diameter [mm]: 75
• Height [mm]: 37
• Manufacturer: JP GROUP

Lisainfo: Wheel bearing kit, for one front wheel, with combi screw Additional information: Wheel bearing kit, for one front wheel, with combi screw

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Identification Number (VIN) from: 8C-P-224840
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle
• Name: Rattalaagrikomplekt
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.73
• Height 2 [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Laius (mm): 14,7, 17
• Siseläbimõõt [mm]: 29, 19
• Välisläbimõõt [mm]: 50,3, 45
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 75
• Inner Diameter 1 [mm]: 41
• Inner Diameter 2 [mm]: 39
• Width [mm]: 37
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with screw
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Installatsiooni pool: taga
• Üldine informatsioon: wheel bearing with assembly parts; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Siseläbimõõt 1 [mm]: 39
• Siseläbimõõt 2 (mm): 41
• Kaal (kg): 0,7
• Välisläbimõõt 1 [mm]: 75
• Laius 1 (mm): 37
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 75
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0092
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) from: 8C-P-224 840
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.99
• Supplementary Article/Supplementary Info: with nuts, with motor shaft screw
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: with screw
• Inner Diameter 2 [mm]: 41
• Manufacturer: OPTIMAL

• Vehicle Identification Number (VIN) from: 8C-P-224 840
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.99
• Supplementary Article/Supplementary Info: with motor shaft screw, with nuts
• Name: SW 30 91 7534
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: with fastening material
• Inner Diameter 2 [mm]: 41
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT
• Additional information: F100090
• Lisainfo: F100090

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• Number of bores: 39
• Width [mm]: 37
• Diameter 2 [mm]: 1
• Name: DA KWD1058
• Manufacturer: DAYCO

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 75
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Manufacturer: GSP

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Outer Diameter [mm]: 75
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Model Year to: 1994
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.627
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Installatsiooni pool: kahepoolne
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Manufacturer: IJS GROUP

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Model Year to: 1994
• Fitting Position: Rear Axle
• Weight [kg]: 0.965
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 11.2
• Packaging width [cm]: 8.6
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.65
• Supplementary Article/Supplementary Info: with motor shaft screw, with nuts
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Alternative Repair Kit: 100 498 0037
• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY