Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 01.2010
- Block Separation:
- Construction Year from: 01.2010
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 25
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 25.5
- Inner Diameter [mm]: 24
- Length [mm]: 54
- Width [mm]: 45
- Height [mm]: 53
- for OE number: 8K0411327A
- Manufacturer: SASIC
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 25
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
- for PR number: K8C
- Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Length [mm]: 44
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.068
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
- Inner Diameter [mm]: 24
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 25
- Manufacturer: 3RG
- Construction Year to: 01.2010
-
for combined PR number: K8R+1BD,
K8R+1BE, K8R+1BV - Block Separation:
- Construction Year from: 01.2010
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 25
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4 WE - Manufacturer: MEY
- Fitting Position: Front Axle
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 53
- Length [mm]: 44
- Required quantity: 2
- Mounting Type: Rubber Mount
- Name: ALT 97903AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front Axle
- Weight [kg]: 0.086
- Inner Diameter [mm]: 23
- Packaging length [cm]: 5.1
- Packaging width [cm]: 5
- Packaging height [cm]: 4.4
- Manufacturer: FEBEST
- Quality: OE Performance
- Material: Rubber
- Fitting Position: Front
- Colour: black
- Weight [g]: 63
- Inner Diameter [mm]: 23.5
- Manufacturer: GATES PASKI PRZEWODY
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.06
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Paigutus - Kndmik VW P. A4/A5/A6/A7 R WEW:24MM 07-
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- paired article number: VKDS 351007
- Height [mm]: 44.5
- Inner Diameter [mm]: 23
- Name: SK VKDS351007
- Manufacturer: SKF
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.06
- Name: SW 30 93 1551
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Total Length [mm]: 44
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 53
- Weight [kg]: 0.06
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: CORTECO
-
for PR number: 1BA,
1BL -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW P. A4/A5/A6/A7 R WEW:24MM 07-
- Length [mm]: 100
- Fitting Position: Front
- Weight [kg]: 0.08
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 21
- Weight [kg]: 0.08
- Packaging length [cm]: 4.7
- Packaging width [cm]: 4.3
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23.4
- Quantity per axle: 2
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Inner Diameter [mm]: 23
- Length [mm]: 50
- Width [mm]: 50
- Required quantity: 1
- Mounting Type: Rubber Mount
- Height [mm]: 44
- Name: ALT 97904PAAL
- Construction Year to: 01.2010
-
for combined PR number: K8R+1BD,
K8R+1BE, K8R+1BV - Block Separation:
- Construction Year from: 01.2010
- Fitting Position: Front Axle
- Inner Diameter [mm]: 25
-
Supplementary Article/Info 2: with clamps,
with nut - Required quantity: 1
-
Name: Remondikomplekt,
stabilisaatorilaager - Manufacturer: MEY
- Lisainfo: 1006150021
- Additional information: 1006150021
-
for PR number: 1BA,
1BL - Fitting Position: Front Axle
- Inner Diameter [mm]: 23
-
Supplementary Article/Info 2: with nut,
with clamps - Required quantity: 1
-
Name: Remondikomplekt,
stabilisaatorilaager - Manufacturer: MEY
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 1.952
- Supplementary Article/Info 2: with bearing
- Name: Puks
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.