Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- for PR number: 1BA
- Length [mm]: 300
- Width [mm]: 30
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Rear Axle
- Weight [kg]: 0.16
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
for PR number: 1BL,
1BR - Weight [kg]: 0.291
- for OE number: 8K0 512 141 G
- Manufacturer: VAICO
Suspension: for vehicles with electronic suspension control, for vehicles with bad road version General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Upper,
Front Axle - Weight [kg]: 0.421
- Packaging length [cm]: 11.3
- Packaging width [cm]: 11.3
- Packaging height [cm]: 5.2
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
-
Fitting Position: Upper,
Front Axle -
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.22
- Block Separation:
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension, for vehicles without electronic suspension control, for vehicles with bad road version
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: JP GROUP
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Name: CFD PK0203
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: JP GROUP
- Fitting Position: Front Axle
- Name: CFD PK4714
- Manufacturer: DACO
- Fitting Position: Front Axle
- Name: CFD PK0205
- Manufacturer: DACO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: AD-
VW- 037 - Supplementary Article/Info 2: without bearing
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Name: CFD PK4101
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Lisainfo: 1590328 JAPKO
- Additional information: 1590328 JAPKO
Suspension: for vehicles without sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- for OE number: 8K0512131K
- Fitting Position: Rear Axle
- Weight [g]: 160
- Component Number: 2
- Name: IM 50762
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 8K0512131J
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Weight [g]: 169
- Component Number: 2
- Name: IM 51008
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Lower Right,
Lower Left, Front Axle -
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.20
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 8 K0 412 377 C,
8K0 412 377 A - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
-
for OE number: 8K0 513 353 E,
8K0 513 353 D -
Fitting Position: Rear Axle Left,
Rear Axle Right - Quality class: PJ
-
Name: Suspension strut support bearing left,
right
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: JP GROUP
- Lisainfo: Top Strut Mounting
- Additional information: Top Strut Mounting
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 202
- Component Number: 4
- Name: IM 50135
- Manufacturer: ORIGINAL IMPERIUM
-
Material: Rubber/
Metal -
Fitting Position: Upper,
Rear Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.41
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: TEDGUM
-
Material: Rubber/
Metal -
Fitting Position: Upper,
Rear Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.41
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: SWAG
- Name: SW 30 93 1984
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: CORTECO
- Fitting Position: Rear Axle
- Manufacturer: KAYABA
- Name: KY 910056
- Additional information: KYB910056
- Lisainfo: KYB910056
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [g]: 445
- Name: IM 35171
- Manufacturer: ORIGINAL IMPERIUM
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
for OE number: 8K0 412 377 B,
8K0 412 377 D - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 8K0 513 353 D,
8K0 513 353 E - Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Weight [kg]: 0.352
- Required quantity: 1
- Packaging length [cm]: 18
- Packaging width [cm]: 12.2
- Packaging height [cm]: 6.1
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Housing Type: Aluminium Housing
- Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 8K0 513 353 D,
8K0 513 353 E - Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Name: KY 910119
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: KYB
- Name: KY SM5784
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without electronic suspension control
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Shock Absorber System: Leveling Control
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 260
- Component Number: 4
- Name: IM 51043
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Manufacturer: KAYABA
- Name: KY 910118
- Additional information: KYB910118
- Lisainfo: KYB910118
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
-
Name: BI 12-
228812
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
for OE number: 8K0 412 377 B,
8K0 412 377 D - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- for OE number: 8K0 412 377 D
- Fitting Position: Front Axle
- Manufacturer: TRUCKTEC
- Fitting Position: Rear Axle
- for OE number: 8K0513353E
- Manufacturer: SASIC
- Fitting Position: Rear Axle
- General Information: Shock absorber bearing
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Height [mm]: 72
- Quantity per axle: 1
- Name: SK VKDP33140T
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Manufacturer: KAYABA
- Name: KY SM5666
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Quantity per axle: 1
- Manufacturer: SKF
Suspension: for vehicles with standard suspension, for vehicles with M technology
- Fitting Position: Front Axle
- Weight [kg]: 0.237
- Suspension: for vehicles with sports suspension
- Packaging length [cm]: 14.5
- Packaging width [cm]: 9.7
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Height [mm]: 83
- Weight [kg]: 0.24
- Suspension: for vehicles with standard suspension
- Packaging length [cm]: 13.8
- Packaging width [cm]: 9.7
- Packaging height [cm]: 7.2
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Required quantity: 1
- Name: TG TED57341
- Manufacturer: TEDGUM
- Fitting Position: Rear Axle
- Weight [kg]: 0.342
- Suspension: for vehicles with sports suspension
- Packaging length [cm]: 16.7
- Packaging width [cm]: 11.8
- Packaging height [cm]: 6.2
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Front Axle Left -
paired article number: GH-
364712H - Name: GH 364712V
-
Manufacturer: AUTO-
GH
-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
364712V - Name: GH 364712H
-
Manufacturer: AUTO-
GH