• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A 919 501 A
• Manufacturer: MEAT&DORIA

• Engine Code: CALB
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: CALB
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: EP 1.830.278
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• for OE number: 07L 905 163 C
• Length [mm]: 40
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-015
• Manufacturer: NTY

• for OE number: 03C 906 051 F
• Fabrication Number: ECM-VW-001

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV488
• Manufacturer: ESEN SKV

• Number of pins: 3
• Socket colour: black
• Fabrication Number: ESS-AU-004
• Manufacturer: NTY

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2009
• Construction Year to: 09.2012
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Pressure from [kPA]: 10
• Pressure to [kPA]: 11
• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Quantity: 1
• Length [mm]: 570
• Number of pins: 3
• Colour Coding: grey
• General Information: knock sensor
• Manufacturer: VIKA

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 07L 905 163 C
• for article number: 87470E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: VERNET

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV127

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fabrication Number: EFP-AU-001
• Manufacturer: NTY
• Name: NTY EFP-AU-001

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• for OE number: 03C 906 051 F
• Manufacturer: MEAT&DORIA

• Engine Code: CALB
• Required quantity: 4
• Manufacturer: FACET

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Alternative Repair Kit: 550476
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Name: DE SS11358
• Manufacturer: DELPHI

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.011
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2012
• Manufacturer: BOSCH
• Name: BS 0261230234

• Engine Code: CALB
• Required quantity: 4
• Manufacturer: EPS

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 94 3778
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 385
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE AS10181

• Fabrication Number: EFP-AU-005
• Manufacturer: NTY
• Name: NTY EFP-AU-005

• Engine Code: CALB
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• for OE number: 036 906 051G
• Manufacturer: MEAT&DORIA

• General Information: pressure sensor
• Manufacturer: VIKA

• Engine Code: CALB
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.090
• Manufacturer: EPS

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV157

• Lambda Sensor: Diagnostic Probe
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Number of connectors: 4
• Weight [kg]: 0.235
• for OE number: 03C 906 051 F
• Name: SW 30 94 5079
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: Niederdrucksensor
• Pressure [bar]: 11
• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Version: AM
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV622

• Engine Code: CALB
• Fitting Position: for cylinder 1-3
• Required quantity: 1
• Housing Colour: green
• Length [mm]: 500
• Manufacturer: FACET

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.042
• for OE number: 06J 906 051 C
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: Low Pressure Side
• Weight [kg]: 0.02
• for OE number: 06E 906 051 K
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2012
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: BS 0261545111
• Manufacturer: BOSCH

• Fitting Position: engine sided
• Number of connectors: 3
• Colour: green
• Cable Length [mm]: 465
• Weight [kg]: 0.062
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: pressure sensor
• Manufacturer: VIKA

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Left
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Name: DN DOX-0119
• Manufacturer: DENSO
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Number of pins: 4
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.042
• for OE number: 06J 906 051 C
• Name: SW 33 10 1057
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Colour: black
• Manufacturer: FAE

• Fitting Position: High Pressure Pump (low pressure side)
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Thread Length [mm]: 11
• Spanner Size: 24
• Pressure [bar]: 11
• Number of pins: 3
• Mounting Type: Bolted
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• Housing Colour: black
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CALB
• Cable Length [mm]: 570
• Number of pins: 3
• Housing Colour: grey
• Manufacturer: FAE

• Number of connectors: 3
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Unheated
• Required quantity: 2
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 920
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 681
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV672
• Manufacturer: ESEN SKV

• Engine Code: CALB
• Fitting Position: Left, Right, Front, after catalytic converter
• Required quantity: 2
• Colour: black
• Cable Length [mm]: 500
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.072
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Name: SW 33 10 3138
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 500
• Number of connectors: 4
• Manufacturer: VERNET

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• Used part return not required:
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV147
• Manufacturer: ESEN SKV

• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 150
• Manufacturer: FAE

• for OE number: 06A906461B
• Number of pins: 4
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Mounting Type: Bolted
• Supplementary Article/Info 2: Low Pressure Side
• for OE number: 06E 906 051K
• Manufacturer: MEAT & DORIA

• Fitting Position: Left
• for OE number: 06E906265Q, 036906262AA
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 107
• Gross Weight [g]: 138
• Name: DN DOX-1702
• Manufacturer: DENSO
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PV009505701
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: oval
• Number of pins: 3
• Pressure [bar]: 140
• Manufacturer: METZGER

• Number of pins: 3
• Manufacturer: METZGER

Fitting Position: between the secondary air pump and secondary air valve

• Required quantity: 2
• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368083
• Manufacturer: VALEO

Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10299-12B1

• Lambda Sensor: Diagnostic Probe
• Number of pins: 4
• Length [mm]: 550
• Housing Colour: black
• Alternative Repair Kit: 0893355
• Manufacturer: METZGER

• Construction Year to: 09.2012
• Mounting Type: Bolted
• Number of pins: 4
• Suction pipe connector diameter [mm]: 75
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009142261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 02.2009
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Lambda Sensor: Broadband lambda sensor
• Cable Length [mm]: 545
• Number of pins: 6
• Supplementary Article/Info 2: with fastening material
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103101
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: CALB
• Construction Year to: 02.2009
• Voltage [V]: 12
• Colour: blue
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV906

• Fitting Position: Left, Right
• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 550
• Manufacturer: PIERBURG

• Length [mm]: 105
• Outer Diameter [mm]: 75
• Number of connectors: 4
• Weight [kg]: 0.29
• Housing Type: with housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Fitting Position: Left, Right
• Number of pins: 5
• Cable Length [mm]: 560
• Version: AM
• Manufacturer: METZGER

• Lambda Sensor: Regulating Probe
• Number of pins: 5
• Cable Length [mm]: 450
• Manufacturer: MEAT&DORIA

• Required quantity: 4
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring