• Engine Code: CDNB
• Fitting Position: Exhaust Turbocharger
• Number of mounting bores: 2
• Manufacturer: ELRING

• Engine Code: CDNB
• Fitting Position: engine sided
• Manufacturer: ELRING

• General Information: seal for oil separator
• Manufacturer: VIKA

• Engine Code: CNCB
• Material: FPM (fluoride rubber)
• Manufacturer: ELRING

• Fitting Position: Crankcase
• Fabrication Number: SEP-AU-001
• Manufacturer: NTY
• Name: NTY SEP-AU-001

• Manufacturer: DR.MOTOR
• Name: DRM 0909
• Additional information: DRM0909
• Lisainfo: DRM0909

Brief Information: Always compare old and new part (in particular OE No.)

• General Information: non-return valve
• Manufacturer: BORSEHUNG

• Fitting Position: from cylinder head cover to oil separator
• Material: FPM (fluoride rubber)
• Manufacturer: ELRING

• Inner Diameter 1 [mm]: 10
• Inner Diameter 2 [mm]: 23
• Length [mm]: 310
• Width [mm]: 90
• Height [mm]: 35
• Weight [kg]: 0.08
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV039

• Engine Code: CDNB
• Width [mm]: 100
• Height [mm]: 35
• Inner Diameter [mm]: 19.3
• Hose Length [mm]: 260
• Supplementary Article/Info 2: with quick couplers
• Weight [kg]: 0.041
• for OE number: 06J 103 221
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CDNB
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 06H 103 464 L
• Manufacturer: TRUCKTEC AUTOMOTIVE

• for OE number: 06J103221A
• Weight [g]: 60
• Name: IM 223579
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Crankcase
• Supplementary Article/Supplementary Info: with seal
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Seal Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 06A 103 495 AC
• Fitting Position: Cylinder Head
• Length [mm]: 215
• Width [mm]: 200
• Height [mm]: 90
• Operating Mode: Pressure Controlled
• Valve type: Diaphragm Valve, Breather Valve
• Supplementary Article/Supplementary Info: with seal
• for engine number: CBFA, CCTA
• Observe service information:
• Housing material: Polyamid 6.6
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Fabrication Number: SEP-VW-008
• Manufacturer: NTY
• Name: NTY SEP-VW-008

• Component Number: 053-028-106
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fabrication Number: SEP-AU-005
• Manufacturer: NTY
• Name: NTY SEP-AU-005

• General Information: oil separator
• Manufacturer: VIKA

• Component Number: 053-028-101
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: CDNB
• Production date to: 30.09.2012
• Fitting Position: Left Rear
• Weight [kg]: 0.072
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: vent hose
• Manufacturer: VIKA

• Production date to: 30.09.2012
• Fitting Position: Cylinder Head Cover, Upper
• Supplementary Article/Supplementary Info: with seal
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Operating Mode: Pressure Controlled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 06H 103 495 AE
• Fitting Position: Cylinder Head
• Length [mm]: 215
• Width [mm]: 205
• Height [mm]: 90
• Operating Mode: Pressure Controlled
• Valve type: Breather Valve, Diaphragm Valve
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Housing material: Polyamid 6.6
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Fabrication Number: SEP-VW-007
• Manufacturer: NTY
• Name: NTY SEP-VW-007

Manufacturer: ERA

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.19
• Name: CE 31SKV089
• Manufacturer: ESEN SKV

• for OE number: 6H 103 495 E
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: CDNB
• Construction Year to: 09.2012
• Manufacturer: JP GROUP
• Lisainfo: Oil Trap, crankcase breather
• Additional information: Oil Trap, crankcase breather

• Fabrication Number: SEP-VW-015
• Supplementary Article/Supplementary Info: with hose

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.52
• Manufacturer: SKV GERMANY
• Name: CE 31SKV083

• for OE number: 6H103213G
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• not for trim level: G92
• Engine Code: CDNB
• Position/Degree: 1
• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV035

• General Information: oil separator; STO
• Manufacturer: VIKA

• Fitting Position: Cylinder Head Cover, Upper
• Valve type: Breather Valve
• Supplementary Article/Supplementary Info: with seal
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Housing Type: Synthetic Material Housing
• Supplementary Article/Info 2: with bolts/screws
• Number of bolts/screws: 7
• Operating Mode: Pressure Controlled
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date to: 30.09.2012
• Observe the vehicle manufacturer specifications:
• Manufacturer: ENERGY

• Material: Plastic
• Colour: black
• Manufacturer: GATES PASKI PRZEWODY

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.52
• Name: CE 31SKV085
• Manufacturer: ESEN SKV

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.52
• Name: CE 31SKV084
• Manufacturer: ESEN SKV

• General Information: oil separator; STO
• Manufacturer: VIKA

• Manufacturer: JP GROUP
• Lisainfo: Oil Trap, crankcase breather
• Additional information: Oil Trap, crankcase breather

• for OE number: 06H 103 495 AH
• Manufacturer: TRUCKTEC

• Observe the vehicle manufacturer specifications:
• Production date to: 30.09.2012
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Engine Code: CDNB
• Fitting Position: Cylinder Head
• Supplementary Article/Supplementary Info: with seal
• Valve type: Breather Valve
• Operating Mode: Pressure Controlled
• Always compare old and new part (in particular OE No.):
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.47
• Manufacturer: SKV GERMANY
• Name: CE 31SKV007

• Name: DRM 0662
• Manufacturer: DR.MOTOR AUTOMOTIVE

• General Information: Oil and gas separator;low power;STO
• Manufacturer: VIKA

• Engine Code: CDNB
• Colour: black
• Material: Plastic
• Weight [kg]: 0.425
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Vehicle Identification Number (VIN) to: FP-CA200 000, 8R-CA200 000, 8R-CY715 000, 8R-DA200 000 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06H 103 495 AE
• Manufacturer: MEAT&DORIA

• Engine Code: CNCB
• Weight [kg]: 0.431
• for OE number: 06K 103 495 BL
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CDNB
• Colour: black
• Material: Plastic
• Weight [kg]: 0.425
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: SW 33 10 0269
• Manufacturer: SWAG

Vehicle Identification Number (VIN) to: FP-CA200 000, 8R-CA200 000, 8R-CY715 000, 8R-DA200 000 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle type: CNCB
• Fitting Position: Cylinder Head Cover, Upper
• Valve type: Breather Valve
• Supplementary Article/Supplementary Info: with seal
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Housing Type: Synthetic Material Housing
• Supplementary Article/Info 2: with bolts/screws
• Number of bolts/screws: 7
• Operating Mode: Pressure Controlled
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Engine Code: CDNB
• Construction Year from: 03.2012
• Colour: black
• Material: Plastic
• Weight [kg]: 0.42
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 215
• Operating Mode: Pressure Controlled
• Observe technical data:
• Supplementary Article/Supplementary Info: with seal
• Observe the vehicle manufacturer specifications:
• Valve type: Diaphragm Valve, Breather Valve
• Recommended change interval [km]: 60,000
• for engine number: CBFA, CCTA
• Housing material: Polyamid 6.6
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• for OE number: 06A 103 495 AC
• Fitting Position: Cylinder Head
• Width [mm]: 200
• Observe service information:
• Height [mm]: 90
• Recommended change interval [years]: 3
• Article number of recommended accessories: V10-3879, V10-3880, V10-3881
• Weight [kg]: 0.554
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.65
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV008

• Engine Code: CDNB
• Length [mm]: 178.9
• Width [mm]: 94.6
• Thickness [mm]: 63.8
• Weight [kg]: 0.118
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CDNB
• Fitting Position: Cylinder Head
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with seal
• Housing material: Polyamid 6.6
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 3
• Seal Material: FPM (fluoride rubber)
• Valve type: Breather Valve, Diaphragm Valve
• Observe service information:
• Weight [kg]: 0.241
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date to: 30.09.2012
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Supplementary Info: with seal
• Operating Mode: Pressure Controlled
• Fitting Position: Cylinder Head
• Alternative Repair Kit: 2385072, 2385148
• Consult accessories list for recommended additional repairs:
• Manufacturer: METZGER

• General Information: oil and gas separator
• Manufacturer: BORSEHUNG