Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Driven Units: Camshaft
-
Length [mm]: 1,
143 - Width [mm]: 18
- Number of Teeth: 120
- Lisainfo: Timing Belt
- Additional information: Timing Belt
-
Filter type: In-
Line Filter - Outer Diameter [mm]: 85
- Height [mm]: 169
-
Thread Size Entry: M 14 x 1,
5 mm -
Thread Size Exit: M 14 x 1,
5 mm - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Filter type: In-
Line Filter - Outer Diameter [mm]: 88
- Height [mm]: 172
- Manufacturer: JP GROUP
- Lisainfo: Fuel filter
- Additional information: Fuel filter
-
Filter type: In-
Line Filter - Height [mm]: 170
- Outer Diameter [mm]: 84
-
Thread Size Entry: M14 x 1,
5 -
Thread Size Exit: M12 x 1,
5 - Name: KTUSEFILTER
- Manufacturer: ALC
- Number of Teeth: 120
-
Length [mm]: 1,
143 - Width [mm]: 18
- Tooth Pitch [mm]: 9.525
- Manufacturer: BOSCH PASKI NAPÊDOWE
- Driven Units: Camshaft
-
Trim Level: >07/
86 - Number of Teeth: 120
- Width [mm]: 18
- Manufacturer: DAYCO
- Name: DA 94058
-
Filter type: In-
Line Filter - Length [mm]: 172
- Outer Diameter [mm]: 88
-
Internal Thread Size: M14 x 1,
5 - Weight [kg]: 0.3
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
-
Article number of the recommended special tool: STT-
1 -
Belt Material: Polychloroprene
(Neoprene) - Number of Teeth: 120
- Width [mm]: 18
- Tooth Pitch [mm]: 9.525
-
Length [mm]: 1,
143 - Manufacturer: GATES
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Net weight [kg]: 1.54
- Name: PIDURIKLOTSIDE KOMPLEKT
- Manufacturer: NK
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Net weight [kg]: 1.59
- Name: PIDURIKLOTSIDE KOMPLEKT
- Manufacturer: NK
- Driven Units: Camshaft
- Number of Teeth: 120
- Packaging length [cm]: 25.5
- Packaging width [cm]: 16
- Packaging height [cm]: 3
- Weight [kg]: 0.139
- Width [mm]: 18
- Tooth Pitch [mm]: 9.525
- Name: HAMMASRIHM
- Manufacturer: CON
-
Connecting thread: M14x1,
5 - Diameter [mm]: 86
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Filter type: Spin-
on Filter -
Thread Size: M14X1,
5 - Material: Steel
- Height [mm]: 173.3
- Name: KTUSEFILTER
- Manufacturer: MEY
- Diameter [mm]: 200
- Width [mm]: 40
- Fitting Position: Rear Axle
- Brake System: VAG
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact
-
Brake System: Lucas -
TRW - Width [mm]: 120
- Height [mm]: 70
- Thickness [mm]: 17
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Braking System: for vehicles without brake force regulator
- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 30
- Brake Pad: with lining
- Manufacturer: JP GROUP
-
Lisainfo: Brake shoe set,
without E- mark, 180x30 mm -
Additional information: Brake shoe set,
without E- mark, 180x30 mm
- Fitting Position: Rear Axle
- Construction Year from: 09.1986
-
FMSI Code: D228-
7309 D228- 7498 -
Test Mark: E1 90R-
01878/ 541 - WVA Number: 21144
- Brake System: TRW
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: not prepared for wear indicator
- Width 1 [mm]: 87.5
- Width 2 [mm]: 87
- Height 1 [mm]: 66.8
- Height 2 [mm]: 66.8
- Thickness 1 [mm]: 16
- Thickness 2 [mm]: 16
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP451
- Fitting Position: Rear Axle
- Width [mm]: 40
- Brake System: VAG
- Supplementary Article/Info 2: with handbrake lever
- Inner brake drum diameter [mm]: 200
- Manufacturer: BREMBO
- Name: BR S 85 508
- Fitting Position: Front Axle
- Construction Year from: 09.1986
-
FMSI Code: D227-
7143 D684- 7571 -
Test Mark: E1 90R-
01881/ 648 - WVA Number: 20669
- Brake System: TRW
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
Friction Lining Material: Low-
Metallic - Width 1 [mm]: 119.3
- Width 2 [mm]: 119
- Height 1 [mm]: 69.5
- Height 2 [mm]: 69.5
- Thickness 1 [mm]: 19.6
- Thickness 2 [mm]: 19.6
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP429
Wear Warning Contact: excl. wear warning contact, not prepared for wear indicator
- Fitting Position: Front Axle
- Manufacturer Restriction: TRW
- Height [mm]: 69.6
- Thickness [mm]: 16
- Wear Warning Contact: not prepared for wear indicator
- Supplementary Article/Info 2: with brake caliper screws
- Width [mm]: 120
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX
- Block Separation:
-
Vehicle Identification Number (VIN) to: 81-
H- 299 000 - Width [mm]: 40
- Outer Diameter [mm]: 200
- Test Mark: ECE R90 Approved
- Material: Sheet Steel
- Brake Pad: with lining
- Fitting Position: Rear Axle
- Weight [kg]: 1.55
- Manufacturer: FEBI HAMULCE
Braking System: for vehicles with reinforced brakes, for vehicles with brake force regulator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Filter type: In-
Line Filter - Diameter [mm]: 80.5
- Height [mm]: 172.5
-
Thread Size Entry: M14x1,
5 -
Thread Size Exit: M14x1,
5 - Packaging height [cm]: 18
- Net Weight [g]: 351
- Packaging length [cm]: 9
- Packaging width [cm]: 9
- Name: KN KL29
- Manufacturer: KNECHT
- Fitting Position: Rear Axle
- Width [mm]: 40
- Supplementary Article/Supplementary Info: with wheel brake cylinder
-
Mounting Type: not pre-
mounted - Inner brake drum diameter [mm]: 200
- Name: PIDURIKLOTSIDE KOMPLEKT
- Manufacturer: MAX
- Fitting Position: Front Axle
- Manufacturer Restriction: TRW
- Width [mm]: 119.3
- Height [mm]: 69.6
- Thickness [mm]: 16
- Wear Warning Contact: not prepared for wear indicator
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
-
Test Mark: E1 90R 01024/
129 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 20669
- Thickness [mm]: 16.5
- Width [mm]: 110
- Height [mm]: 69.5
-
Brake System: Lucas-
Girling - Manufacturer: BOSCH
- Fitting Position: Front Axle
- Construction Year from: 09.1986
-
FMSI Code: D290-
7143 - WVA Number: 20669 20901
- Brake System: TRW
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 119
- Width 2 [mm]: 119
- Height 1 [mm]: 69.5
- Height 2 [mm]: 69.5
- Thickness 1 [mm]: 18.9
- Thickness 2 [mm]: 18.9
- Name: DE LP444
- Manufacturer: DELPHI
- Width [mm]: 18
- Number of Teeth: 120
- Belts: with trapezoidal tooth profile
- Weight [kg]: 0.897
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Thickness [mm]: 16.5
- Test Mark: R90 Homologated
- Width [mm]: 88
- Height [mm]: 68
- Weight [kg]: 0.87
- Height 1 [mm]: 68
- Wear Warning Contact: not prepared for wear indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: TRW
- Packing Type: Box
- WVA Number: 21144
- Packaging length [cm]: 15
- Packaging width [cm]: 10.5
- Packaging height [cm]: 4.3
- Manufacturer: JURID
- Number of Teeth 1: 120
- Width 1 [mm]: 18
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Fitting Position: Front Axle
- Width [mm]: 119
- Height [mm]: 69.5
- Thickness [mm]: 15.7
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
-
Brake System: Lucas /
TRW -
Test Mark: E9 90R-
02A1251/ 4450 - MAPP code available:
- Manufacturer: ATE
- Driven Units: Camshaft
- Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 7
- Weight [kg]: 0.6
- Number of Teeth: 120
- Width [mm]: 18
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
- Number of Teeth 1: 120
- Width 1 [mm]: 18
- Supplementary Article/Supplementary Info: with water pump
- Observe service information:
- SVHC: No SVHC present!
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: INA
- Water pump impeller material: Cast Iron
- Belt Width [mm]: 18
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of Teeth: 120
- Belts: with trapezoidal tooth profile
- Manufacturer: SKF
- Name: SK VKMC01031
- Driven Units: Camshaft
- Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 120
- Weight [kg]: 1.941
- Width [mm]: 18
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: CON