• Vehicle Identification Number (VIN) to: 8F-BN050 000
• Suspension: for vehicles without electronic suspension control
• for PR number: 1BA, 1BD, 1BE, 1BV
• Block Separation:
• Thickness [mm]: 160
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Name: SW 30 93 6604
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with electronic suspension control
• for PR number: 1BL
• Thickness [mm]: 153
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle Right, Rear Axle Left
• Weight [kg]: 0.05
• Manufacturer: FEB
• Additional information: FE45741
• Lisainfo: FE45741

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid AUDI T. A4 B8/A5/A7/Q5

• Vehicle Identification Number (VIN) to: 8F-BN050 000
• Suspension: for vehicles without electronic suspension control
• for PR number: 1BA, 1BD, 1BE, 1BV
• Block Separation:
• Thickness [mm]: 160
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Name:
• Manufacturer: FEB
• Additional information: FE36604
• Lisainfo: FE36604

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Current carrying capacity [A]: 9
• Operating voltage [V]: 24
• for OE number: 1J6 943 021 B, 1JE 943 021, 1K8 943 021 C
• for article number: 70660022
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Fitting Position: Rear Axle
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Article number of recommended accessories: MK388, PK279
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Max. Length [mm]: 667
• Shock Absorber Design: Suspension Strut
• Name: CFD 560212
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-4263
• Name: Amort
• Manufacturer: MAX
• Lisainfo: ELS11-0825
• Additional information: ELS11-0825

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB
• Additional information: 344711
• Lisainfo: 344711

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version, for vehicles without electronic suspension control

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DENCKERMANN FILTRY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control for OE number: 8F0413031AA, 8F0413031B, 8K0413031AC, 8K0413031AD, 8K0413031AE, 8K0413031AF, 8K0413031AL, 8K0413031AN, 8K0413031AS, 8K0413031BD, 8K0413031BE, 8K0413031BF, 8K0413031BG, 8K0413031BK, 8K0413031BL, 8K0413031CA, 8K0413031CB, 8K0413031CG, 8T0413031AC, 8T0413031AD

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension

• Fitting Position: Front Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Yoke
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control for OE number: 8F0 413 031 AA, 8F0 413 031 B, 8K0 413 031 AC, 8K0 413 031 AD, 8K0 413 031 AE, 8K0 413 031 AF, 8K0 413 031 AL, 8K0 413 031 AN, 8K0 413 031 AS, 8K0 413 031 BD, 8K0 413 031 BE, 8K0 413 031 BF, 8K0 413 031 BG, 8K0 413 031 BK, 8K0 413 031 BL, 8K0 413 031 CA, 8K0 413 031 CB, 8K0 413 031 CG, 8T0 413 031 AC, 8T0 413 031 AD

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• not for trim level: S5
• Article number of recommended accessories: MK361, PK281
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Max. Length [mm]: 521
• Name: CFD 450212
• Manufacturer: DACO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-3348
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Vehicle type: 1BV
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension

• Fitting Position: Front Axle
• for PR number: 1BD, 1BV
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 525
• Length 2 [mm]: 379
• Piston Rod Diameter [mm]: 20
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin
• Supplementary Article/Supplementary Info: with spring seat
• Article number of recommended accessories: 100 640 0014, 100 641 0010
• replacement in pairs recommended:
• Name: Amort
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 740 0021, 100 741 0002
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY
• Lisainfo: 1267250027
• Additional information: 1267250027

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.95
• Bore Ø [mm]: 25
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK388, PK279
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Supplementary Article/Supplementary Info: with spring seat
• Article number of recommended accessories: 100 641 0010, 100 640 0025
• replacement in pairs recommended:
• Name: Amort
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control

• Suspension: for vehicles with sports suspension
• Trim Level: S-Line
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 740 0027
• replacement in pairs recommended:
• Name: Amort
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 641 0010, 100 640 0014
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.053
• Bore Ø [mm]: 35
• Length 1 [mm]: 371
• Length 2 [mm]: 521
• Piston Rod Diameter [mm]: 18
• Article number of recommended accessories: MK361, PK281
• Packaging length [cm]: 61.7
• Packaging width [cm]: 14
• Packaging height [cm]: 14
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• for PR number: 1BE
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2.1
• Bore Ø [mm]: 25
• Length 1 [mm]: 439
• Length 2 [mm]: 666
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK388, PK279
• Packaging length [cm]: 60
• Packaging width [cm]: 7
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEOV30/13X215A
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: 1BV
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: 1BV
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Parameter: SFE36/18X137A
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Replace in pairs only:
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Check OE number:
• Parameter: SFE36/18X137A
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control for OE number: 8F0 413 031 AA, 8F0 413 031 B, 8K0 413 031 AC, 8K0 413 031 AD, 8K0 413 031 AE, 8K0 413 031 AF, 8K0 413 031 AL, 8K0 413 031 AN, 8K0 413 031 AS, 8K0 413 031 BD, 8K0 413 031 BE, 8K0 413 031 BF, 8K0 413 031 BG, 8K0 413 031 BK, 8K0 413 031 BL, 8K0 413 031 CA, 8K0 413 031 CB, 8K0 413 031 CG, 8T0 413 031 AC, 8T0 413 031 AD SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SE36/18X146A
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control for OE number: 8F0 413 031 AB, 8F0 413 031 T, 8R0 413 031 AF, 8R0 413 031 AK, 8R0 413 031 AL, 8R0 413 031 AP, 8R0 413 031 BB, 8R0 413 031 BC, 8R0 413 031 BD, 8R0 413 031 BE, 8R0 413 031 F, 8R0 413 031 G, 8R0 413 031 M, 8R0 413 031 N SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-145992

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A5/S5, 03.07-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A5/S5, 03.07-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Right
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT32/20X138ED
• paired article number: 319 000
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Left
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT32/18X214ED
• paired article number: 319 003
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Right
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT32/18X214ED
• paired article number: 319 002
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Left
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT32/20X138ED
• paired article number: 319 001
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!