Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 188
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) S4 - 3.0 TFSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) S4 - 3.0 TFSI
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Core Length [mm]: 235
- Core Width [mm]: 190
- Core Depth [mm]: 26
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 36
- Packaging width [cm]: 25
- Packaging height [cm]: 14
- Weight [kg]: 0.802
- Manufacturer: AKSDASIS
- Heating/Cooling: Auxiliary Radiator
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 188
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Fitting Position: Left,
Right - Heating/Cooling: Auxiliary Radiator
-
Engine Code: CEJA,
CTNA - Material: Aluminium
- Core Length [mm]: 235
- Core Width [mm]: 189
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 235*189*26
- Additional information: 235*189*26
- Radiator type: Brazed cooling fins
- Heating/Cooling: for vehicles with auxiliary cooler
- Core Length [mm]: 235
- Core Width [mm]: 189
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 16
- Packaging height [cm]: 26
- Packaging length [cm]: 38.5
- Net Weight [g]: 782
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 89.5
- Packaging width [cm]: 60.5
- Packaging height [cm]: 15.5
- Weight [kg]: 5.68
- Manufacturer: AKSDASIS
-
Engine Code: CEJA,
CTNA - Material: Aluminium
- Core Length [mm]: 720
- Core Width [mm]: 471
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 720*474*36
- Additional information: 720*474*36
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 471
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 8 /
S 8 (4H) (10- ) 4.2 FSI -
Additional information: AUDI A 8 /
S 8 (4H) (10- ) 4.2 FSI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Core Length [mm]: 614
- Core Width [mm]: 428
- Core Depth [mm]: 16
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Weight [kg]: 2.9
- Packaging length [cm]: 85
- Packaging width [cm]: 62
- Packaging height [cm]: 12
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Weight [kg]: 7.1
- Packaging length [cm]: 100
- Packaging width [cm]: 63
- Packaging height [cm]: 19
- for OE number: 4H0121251E
- Name: Radiator
- Quality class: PJ
Lisainfo: A8, 10- (kvaliteediklass PJ)
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Packaging height [cm]: 18.5
- Packaging width [cm]: 56.5
-
Net Weight [g]: 5,
768 - Packaging length [cm]: 98
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Packaging width [cm]: 19
-
Net Weight [g]: 6,
119 - Packaging height [cm]: 63
- Packaging length [cm]: 99.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Engine Code: CEJA
-
Fitting Position: Centre,
Front - Heating/Cooling: Auxiliary Radiator
- Radiator type: Brazed cooling fins
- Core Length [mm]: 614
- Core Width [mm]: 428
- Core Depth [mm]: 16
- Water Tank Material (radiator): Aluminium
- Manufacturer: produced by MAHLE
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
195 - Packaging height [cm]: 62
- Packaging length [cm]: 84.5
-
Name: Radiaator,
mootorijahutus
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
-
Fitting Position: Front,
Centre - Heating/Cooling: Auxiliary Radiator
- Engine Code: CEJA
- Core Depth [mm]: 16
- Core Length [mm]: 615
- Core Width [mm]: 430
- Radiator type: Brazed cooling fins
- Engine Code: CTNA
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 470
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES (BEHR)
A8, 10-
(kvaliteediklass: Q)"