• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, outer
• Additional information: Rubber mount for wishbone, front, outer

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 43.5
• Inner Diameter [mm]: 12.2
• Length [mm]: 38
• Weight [kg]: 0.082
• Manufacturer: RTS

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 44
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 45
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fitting Position: Right, Left, outer, Front Axle
• Total Length [mm]: 45
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 44
• Name: COC 80004748
• Manufacturer: CORTECO

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Fitting Position: outer, both sides, Front, Lower Front Axle
• Axle alignment required after fitting:
• Weight [kg]: 0.085
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 50
• Thickness 1 [mm]: 55
• Manufacturer: DELPHI
• Name: DE TD838W

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.04
• Name: DY 37-23403
• Manufacturer: DYS

• Engine Code: CZVD
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.5, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, outer, Front Axle Right, Front Axle Left
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: COC 49398239
• Manufacturer: CORTECO

• Fitting Position: Rear Axle Middle
• Weight [kg]: 0.113
• Material: Aluminium
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.4
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331027
• Height [mm]: 54.9
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.2
• Name: SK VKDS331027
• Manufacturer: SKF

• for OE number: 8K0407151F, 8K0407152F
• Fitting Position: in front of axle, outer, Lower Front Axle
• Weight [kg]: 0.112
• Packaging length [cm]: 4.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: outer, Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331028
• Length [mm]: 45
• Height [mm]: 43.8
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Name: SK VKDS331028
• Manufacturer: SKF

• Weight [kg]: 0.118
• Fitting Position: Rear Axle both sides, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 42.9
• Length [mm]: 46
• Manufacturer: RTS

• Outer Diameter 1 [mm]: 50
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 55
• Manufacturer: BGA

Fitting Position: inner, Lower, Front, Front Axle Left, Front Axle Right

• Engine Code: CZVD
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45, 27
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.154
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides, Upper
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Height [mm]: 40
• Name: ALT 93085AL
• Manufacturer: ALTE AUTOMOTIVE

• Engine Code: CZVD
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.088
• Manufacturer: FEBI

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 46
• Thickness 1 [mm]: 40
• Name: DE TD1636W
• Manufacturer: DELPHI

• Engine Code: CZVD
• Thickness [mm]: 55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 51, 27
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.16
• Observe service information:
• Name: SW 30 92 9944
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left, Right, inner, Front Axle
• Name: COC 80001748
• Manufacturer: CORTECO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
AUDI A4 08-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 08-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, outer, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 44
• Thickness 1 [mm]: 45
• Manufacturer: DELPHI
• Name: DE TD723W

• Fitting Position: Front Axle both sides, Lower, Front, outer
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 44
• Height [mm]: 45
• Name: ALT 84050AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Upper, inner, Front, Rear
• Block Separation:
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.5
• Width 1 [mm]: 26
• Width 2 [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Height [mm]: 55
• Name: ALT 86100AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: inner, Rear Axle Lower, Front
• Weight [kg]: 0.195
• Packaging length [cm]: 6
• Packaging width [cm]: 5.4
• Packaging height [cm]: 5.4
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, both sides, Upper, inner
• Manufacturer: LEMFÖRDER
• Lisainfo: 35765 01 LEM
• Additional information: 35765 01 LEM

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle, both sides, Lower, Front, inner
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 44252 01
• Observe service information:
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Engine Code: CZVD
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: in front of axle, inner, Lower Front Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Lower, both sides, inner, outer, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 44
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1493W

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: BGA

• Engine Code: CZVD
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 92 7484

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Manufacturer: MEYLE

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Height [mm]: 55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

Fitting Position: inner, Front, Lower, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle both sides, inner, Front
• Length [mm]: 55
• Outer Diameter [mm]: 35
• Inner Diameter [mm]: 12.2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.4
• Outer Diameter [mm]: 43.8
• Width [mm]: 45
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Lower, Rear, inner
• Weight [kg]: 0.221
• Packaging length [cm]: 6
• Packaging width [cm]: 5.5
• Packaging height [cm]: 5.5
• Manufacturer: FEBEST

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 14
• Height [mm]: 36
• Name: ALT 94369AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower Front Axle, inner
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.2
• Width [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: FAG

• for PR number: L0L, L0R
• Weight [kg]: 0.091
• Quantity: 10
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 1.2
• Manufacturer: FEBEST

• Fitting Position: Front Axle, inner
• Axle: 1st front axle
• Weight [kg]: 0.18
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Front Axle, both sides, Lower, Front, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 39097 01, 39364 01, 44252 01
• Observe service information:
• Name: LMI 2712601
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Hydro Mount
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 12
• Width [mm]: 80
• Replace in pairs only:
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: in front of axle, Rear Axle, inner, outer, Lower
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Length [mm]: 38
• paired article number: 271592
• Weight [kg]: 0.08
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 44
• Inner Diameter [mm]: 12
• Height [mm]: 38
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle, both sides, Rear, Lower
• Manufacturer: TEDGUM_TD

• Weight [kg]: 0.4
• Fitting Position: Front Axle both sides, Lower, Rear, inner
• Outer Diameter [mm]: 74.7
• Inner Diameter [mm]: 12.2
• Length [mm]: 79.9
• Manufacturer: RTS

• Engine Code: CZVD
• Width [mm]: 75
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.5
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CZVD
• Width [mm]: 75
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.5
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 75
• Length [mm]: 80
• Mounting Type: Hydro Mount
• paired article number: 271195
• Weight [kg]: 0.5
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Right, Front Axle Left, Lower

• for PR number: FM0
• Mounting Type: Hydro Mount
• Fitting Position: Front Axle, both sides, Rear, Lower
• Article number of recommended accessories: 43645 01
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Manufacturer: MEYLE

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Fitting Position: Front Axle, inner
• Axle: 1st RA
• Height [mm]: 80
• Weight [kg]: 0.255
• Required quantity: 2
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 75
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Hydro Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle, both sides
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Mounting Type: Hydro Mount
• Axle alignment required after fitting:
• Width [mm]: 75
• Weight [kg]: 0.499
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Quantity Unit: Kit
• Quantity: 12
• General Information: repair kit for contrl arm rubber bush
• Manufacturer: VIKA