• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Model Year to: 2014
• Operating Mode: Electric
• Manufacturer Restriction: HELLA
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Connector Shape: D Shape
• Fabrication Number: ECX-AU-012
• paired article number: ECX-AU-011
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: ECX-AU-011
• paired article number: ECX-AU-012
• Manufacturer: NTY
• Name: NTY ECX-AU-011

• Fitting Position: Rear Axle Left
• Sensor Type: Lever Sensor
• Number of pins: 4
• Fabrication Number: ECX-AU-022
• Manufacturer: NTY
• Name: NTY ECX-AU-022

• Sensor Type: Lever Sensor
• Fitting Position: Rear Axle Right
• Fabrication Number: ECX-AU-013
• Name: NTY ECX-AU-013
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Sensor Type: Lever Sensor
• Fabrication Number: ECX-AU-010

• Fitting Position: Front Axle Left
• Number of pins: 4
• Sensor Type: Lever Sensor
• Fabrication Number: ECX-AU-041
• Manufacturer: NTY

• Spring Type: for vehicles with air suspension
• Connector Shape: D Shape
• Supplementary Article/Info 2: with coupling rod
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Fitting Position: Front Axle Right
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Number of pins: 4
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle, Right
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Warranty: 3 years warranty
• paired article number: 17SKV429
• Weight [kg]: 0.15
• Name: CE 17SKV430
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Warranty: 3 years warranty
• paired article number: 17SKV430
• Weight [kg]: 0.15
• Name: CE 17SKV429
• Manufacturer: ESEN SKV

• Fitting Position: Left Rear
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Rear Axle, Right
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Warranty: 3 years warranty
• paired article number: 17SKV428
• Weight [kg]: 0.2
• Name: CE 17SKV431
• Manufacturer: ESEN SKV

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Right
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Rear Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Warranty: 3 years warranty
• paired article number: 17SKV431
• Weight [kg]: 0.2
• Name: CE 17SKV428
• Manufacturer: ESEN SKV

• Number of pins: 4
• Fitting Position: Rear Axle Right
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Warranty: 3 years warranty
• Weight [kg]: 0.21
• Name: CE 17SKV710
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Right, Front Axle
• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Rear Axle
• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• paired article number: 623 144
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spring Type: for vehicles without air suspension
• Number of pins: 4
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• for OE number: 4H0941310C
• Number of pins: 4
• Fitting Position: Right Rear
• Manufacturer: BUG

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• for OE number: 4H0941309C
• Number of pins: 4
• Fitting Position: Left Rear
• Manufacturer: BUG

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• for OE number: 4H0941285G
• Number of pins: 4
• Fitting Position: Left Front
• Manufacturer: BUG

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Right, Front Axle
• Spring Type: for vehicles with air suspension
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• paired article number: 119 545
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• for PR number: 1BA
• for OE number: 8R0941309E
• Fitting Position: Rear
• Manufacturer: BUG

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Spring Type: for vehicles without air suspension
• for OE number: 4H0941285H
• Fitting Position: Front
• Manufacturer: BUG

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Right
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Right
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• paired article number: 57769
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• paired article number: 57770
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Left
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left Rear
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.4
• Net weight [kg]: 0.2
• paired article number: RH-3589
• Manufactured in: China
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Spring Type: for vehicles with air suspension
• Fitting Position: Right Rear
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.4
• Net weight [kg]: 0.2
• paired article number: RH-3590
• Manufactured in: China
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Spring Type: for vehicles with air suspension
• Fitting Position: Left Front
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.3
• Net weight [kg]: 0.2
• paired article number: RH-3587
• Manufactured in: China
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Spring Type: for vehicles with air suspension
• Fitting Position: Right Front
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.3
• Net weight [kg]: 0.2
• paired article number: RH-3588
• Manufactured in: China
• replacement in pairs recommended:
• Manufacturer: ARNOTT