• Engine Code: F1AE3481A
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 7.8170, 7.8190
• Manufacturer: FACET

• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: BOS

• Engine Code: F1AE3481A
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-FT-007
• Number of pins: 3
• Voltage [V]: 12
• Manufacturer: NTY
• Name: NTY ECP-FT-007

• Vehicle Identification Number (VIN) from: 5932207/D485485
• Transmission Type: Manual Transmission
• Fabrication Number: ECS-AU-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Material: Plastic
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 8
• Fabrication Number: ECS-AU-004
• Manufacturer: NTY

• Number of pins: 3
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 8
• Fabrication Number: ECS-PL-002
• Manufacturer: NTY

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX
• Lisainfo: 21-0313
• Additional information: 21-0313

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA103

• Transmission Type: Automatic Transmission
• Fabrication Number: ECS-ME-000
• Manufacturer: NTY

• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Pressure from [kPA]: 11
• Pressure to [kPA]: 30
• Number of pins: 4
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Number of pins: 4
• Pressure from [kPA]: 27
• Name: DE PS10144
• Manufacturer: DELPHI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

• Fabrication Number: ECS-FT-001
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• Quality: OE EQUIVALENT
• for OE number: 01235084
• Manufacturer: MEAT&DORIA

• Material: Plastic
• Number of connectors: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV791

• Number of connectors: 3
• Material: Plastic
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Vehicle Identification Number (VIN) from: 5932207, D485485, D483835
• Block Separation:
• for model code: Daily 29S11
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 90,000
• for OE number: 05146181AA
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Engine Code: F1AE3481A
• Length [mm]: 260
• Manufacturer: EPS

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: VERNET

• Supplementary Article/Info 2: with cable
• Length [mm]: 260
• Height [mm]: 24
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Manufacturer: JPN

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168651

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: 5932206/D483834
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

Manufacturer: FAST

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) from: **********5932207, **********D483835
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.021
• for OE number: 51908411
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV667
• Manufacturer: ESEN SKV

• Length [mm]: 230
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Exhaust System: before soot particulate filter
• Vehicle Identification Number (VIN) to: 5932206, D485484, D483834
• Block Separation:
• Number of pins: 3
• Name: DE DPS00025-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Opening pressure [kPa]: 0.5
• Manufacturer: DELPHI
• Name: DE DPS00007

• Number of pins: 3
• Sensor Type: Inductive Sensor
• for OE number: 500371540
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• for OE number: 1724
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: D485485, D483835, 5932207
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: oval
• Number of pins: 3
• for OE number: 51 855 119
• Weight [kg]: 0.024
• Vehicle Equipment: for vehicles with diesel soot filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Fuel Line (high pressure side)
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,000
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: F1AE3481A
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: F1AE3481A
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Exhaust System: before soot particulate filter
• Vehicle Identification Number (VIN) to: 5932206, D485484, D483834
• Block Separation:
• for model code: Daily 29S11
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 99,000
• Manufacturer: NRF

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) from: 5932207, D485485
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• for OE number: 93 185 556
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [g]: 100
• Length [mm]: 40
• Width [mm]: 72
• Height [mm]: 69
• Housing material: Plastic
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) from: 5932207, D485485
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: FAST

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) to: 5932206, D485484
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) to: 5932206, D485484
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• Thread Size: M18X1.5
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,000
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST
• Lisainfo: FT80062 FAST
• Additional information: FT80062 FAST

Manufacturer: MAGNETI MARELLI

• Supplementary Article/Info 2: High Pressure Side
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Supplementary Article/Info 2: with cable
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: NRF KLIMATYZACJA

• Engine Code: F1AE3481A
• for OE number: 5801356473, 5801600484
• Sensor Type: Exhaust gas back pressure sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 90
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Name: Andur, diferentsiaalrohk
• Manufacturer: PIE

• Exhaust System: before soot particulate filter
• Vehicle Identification Number (VIN) to: 5932206, D485484
• Vehicle type: Daily 40C11
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 2 [mm]: 10
• Diameter 1 [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Vehicle Identification Number (VIN) to: 5932206
• Emission Standard: Euro 5
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Fabrication Number: EPP-FT-004
• Manufacturer: NTY

• Number of pins: 3
• Pressure [Pa] to: 93,000
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: 5932207, D485485
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Housing Type: with housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Engine Code: F1AE3481A
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Supplementary Article/Info 2: with seal ring
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.27
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV210
• Manufacturer: ESEN SKV

• Cable Length [mm]: 500
• Number of pins: 2
• Manufacturer: JPN

• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 500
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Manufacturer: FAST

• Supplementary Article/Info 2: High Pressure Side
• Pressure to [bar]: 2,000
• Fuel Mixture Formation: Common Rail (CR)
• Thread Size: M18X1,5
• Quality: OE EQUIVALENT
• for OE number: 55230827
• Manufacturer: MEAT&DORIA

Manufacturer: FAST

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Engine Code: F1AE3481A
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 500
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: F1AE3481A
• Vehicle Identification Number (VIN) from: 2015-5052012, 2015-D547072
• Fitting Position: Front, before catalytic converter
• Quantity: 1
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Length [mm]: 570
• Number of pins: 5
• Connector Shape: D Shape
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY