• Fitting Position: Rear Axle, Left, Right, Front Axle
• Brake Type: Disc Brake
• Block Separation:
• Pikkus (mm): 300

• Pikkus (mm): 61
• Võtmekaugus: 19
• Manufacturer: KAMOKA

• Seerianumber: ECT-CH-006
• Manufacturer: NTY

Manufacturer: FAST

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207019

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Keermemõõt: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 46462179
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF
• Additional information: 727005 NRF
• Lisainfo: 727005 NRF

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Anduritüüp: Hallsensor, Aktiivne andur
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Manufacturer: KAMOKA

• Engine Code: 8140.43R
• Anduritüüp: NTC-andur
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: hall
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: 8140.43R
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Vastab originaalosa värvile: valge, roheline, must
• tootekoodile: 7.8170, 7.8190
• Manufacturer: FACET

• Pistikkontaktide arv: 2
• Keermemõõt: M12x1,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: must
• Kaal (kg): 0,032
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 8140.43R
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Vastab originaalosa värvile: valge, roheline, must
• tootekoodile: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Välisläbimõõt [mm]: 7,4
• Takistus [oom]: 2 080, 294
• Piirangutega toode/piirangu info: koos tihendiga
• Väliskeere [mm]: 12
• Keerme samm (mm): 1,5
• Temperatuurivahemik [°C]: 25, 80
• Montaaživiis: kruvitud
• Värv: sinine
• Võtmekaugus: 19
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must, valge, helesinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Seerianumber: ECP-FT-004
• Manufacturer: NTY

• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 600
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 8140.43R
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

Manufacturer: MAGNETI MARELLI

Manufacturer: FAST

• Seerianumber: ECM-CH-012
• Manufacturer: NTY

• Kõrgus (mm): 24,2
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Manufacturer: BREMI

• Construction Year to: 09.2002
• Engine Number from: 3487099
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 4
• Name: Andur,kompressorirohk
• Manufacturer: MAX

• Seerianumber: ECM-FT-006
• Manufacturer: NTY

• Kaablipikkus (mm): 1 309
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga, koos puksiga
• Manufacturer: KAMOKA

Installatsiooni pool: esisild vasakul, Tagasild vasakul, esisild paremal, Tagasild paremal

Manufacturer: FAST

• Anduritüüp: Induktiivandur
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

Manufacturer: NRF

• Kaablipikkus (mm): 525
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Kinnitusaukude hulk: 1
• Kaablipikkus (mm): 492
• Piirangutega toode/piirangu info 2: koos kaabliga
• Piirangutega toode/piirangu info: koos tihenditega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2002
• Engine Number to: 3487098
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: FAE

• Construction Year to: 09.2002
• Engine Number to: 3487098
• Number of pins: 4
• Manufacturer: JPN

• Engine Code: 8140.43R
• Manufacturer: FACET

• Engine Number to: 3487098
• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA IVECO DAILY 99-
• Manufacturer: BRM

• Engine Code: 8140.43R
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 640
• Kõrgus (mm): 24
• Takistus [oom]: 1 000
• Ühenduste arv: 3
• Manufacturer: VERNET

• Engine Number from: 3487099
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 1
• Piirangutega toode/piirangu info 2: koos integreeritud õhutemp.anduriga
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 250
• tootekoodile: 82595
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 1726
• Manufacturer: MEAT&DORIA

• Engine Code: 8140-43
• OE-numbri jaoks: 1 319 158
• Värv: must
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 24,3
• Piirangutega toode/piirangu info 2: ilma kaablita, koos rõngastihendiga
• Pistikukatte kuju: ovaalne
• Takistus [koom]: 320
• Kaal (kg): 0,03
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• pikkus üle kõige (mm): 1 320
• Pikkus (mm): 40
• Anduritüüp: passiivne andur
• Pistiku värv: hall
• Kaablipikkus (mm): 1 240
• paaris tootenumbrid: 31249
• Kaal (kg): 0,13
• Manufacturer: A.B.S.

• Pinge [V]: 12
• Vastab originaalosa värvile: antratsiit
• Pistikkontaktide arv: 3
• Anduritüüp: Impulssandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PU009163921

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 8140.43R
• Pikkus (mm): 640
• Manufacturer: FACET

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Engine Code: 8140.43R
• Pikkus (mm): 640
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Fitting Position: Front Axle, Rear Axle
• Quantity: 2
• Block Separation:
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 235
• Manufacturer: DELPHI
• Name: DE SS20478
• Quality class: PJ

• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Seerianumber: EFP-BM-000
• Manufacturer: NTY
• Name: NTY EFP-BM-000

• Construction Year to: 09.2002
• Engine Number from: 3487099
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Kaablipikkus (mm): 600
• Pistikkontaktide arv: 3
• Manufacturer: FAE

• Construction Year to: 09.2002
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Ühenduste arv: 2
• Takistus [oom]: 1 790
• Kaablipikkus (mm): 1 309
• Kaal (kg): 0,103
• Piirangutega toode/piirangu info: koos puksiga
• Hooldusinfot jälgida:
• Manufacturer: FEBI

Installatsiooni pool: esisild vasakul, Tagasild vasakul, esisild paremal, Tagasild paremal Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 3487099
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2002
• Fuel Mixture Formation: Direct Injection
• Block Separation:
• Engine Number to: 3249778
• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Name: ANDUR,KšTUSEROHK
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Construction Year to: 09.2002
• Engine Number from: 3249779
• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Name: CZUJNIK CI—N. PALIWA BMW/ HYUNDAI
• Manufacturer: MAX

• Construction Year to: 09.2002
• Engine Number from: 3487099
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 250
• Manufacturer: FAE

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV618

• Construction Year to: 09.2002
• Engine Number from: 3249779
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV614
• Manufacturer: ESEN SKV

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST

• Thread Size: M18X1.5
• Number of pins: 4
• Manufacturer: FAST

• Construction Year to: 09.2002
• Manufacturer: BOSCH

• Name: MM APS50
• Manufacturer: MAGNETI MARELLI

Manufacturer: 3RG

• Construction Year to: 09.2002
• Engine Number to: 3487098
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 250
• Manufacturer: FAE

• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 500
• Hulk: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• tootekoodile: 9035
• OE-numbri jaoks: 46542551
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.2002
• Engine Number to: 3487098
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 13532247581
• Manufacturer: MEAT & DORIA

• Length [mm]: 90
• Manufacturer: FAST

• Construction Year to: 09.2002
• Fuel Mixture Formation: Common Rail (CR)
• Engine Number from: 3249779
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Kütusesüsteemi seadmed: Otsesissepritse
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• OE-numbri jaoks: 504 229 208
• Kaal (kg): 0,046
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.