• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Vehicle Identification Number (VIN) from: A40265
• for OE number: C2C25956
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 480
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 123
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: A40264
• for OE number: C2C8442, C2C22679
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 480
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-0427

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• Housing Colour: grey
• Spanner Size: 19
• for OE number: 4323633
• Manufacturer: KAMOKA

Manufacturer: MAGNETI MARELLI

• Spanner Size: 19
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0127
• Additional information: 21-0127

Manufacturer: MAGNETI MARELLI

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: 3/8 NPT
• for OE number: 3F1A12A648AA
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• for OE number: 1L2412A648BA
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 1047284
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: Passive sensor
• for OE number: 9118368
• Manufacturer: KAMOKA

• Thread Size: 3/8x18 NPTF
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: XM34 12A648 AA, LNA1600AA, 13650 61B00
• Manufacturer: MEAT&DORIA

• Thread Size: M 12x1,5
• Number of pins: 2
• Colour: grey
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: 2B(AJ33)
• Thread Size: 3/818NPT
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Engine Code: AJ8FT
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: green
• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12x1,5
• Weight [kg]: 0.032
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: NPT3/8

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 2B(AJ33)
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Thread Size: 3/8" x 18 NPT
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: white
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Socket colour: grey
• Thread Size: 3/8"x 18 NPTF
• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• for OE number: 5042970, GY01-18-840B, AJ8 10031
• Manufacturer: MEAT&DORIA

• Engine Code: AJ8N21B/AJFR
• Housing Colour: grey
• Number of pins: 2
• Thread Size: NPT3/8
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Thread Size: 3/8x18 NPTF
• Spanner Size: 19
• Colour: grey
• Number of pins: 2
• Thread Type: with tapered thread
• Manufacturer: MEYLE

• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.03
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.03
• Manufacturer: SWAG
• Name: SW 50 92 4467

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: grey
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Model Year to: 2002
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009107831
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: AJ8 10031
• Thread Size: 3/8x18 NPTF
• Number of pins: 2
• Colour: grey
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Number of pins: 2
• Manufacturer: MEYLE

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: grey
• Number of pins: 2
• Thread Size: NPT 3/8-18
• Spanner Size: 19
• Name: DE TS10240-12B1
• Manufacturer: DELPHI

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Housing Colour: grey
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Housing Colour: grey
• Thread Size: 3/8x18 NPTF
• Number of pins: 2
• Manufacturer: FAE

• Fitting Position: Rear
• Number of pins: 3
• Manufacturer: ZZVF

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: straight
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-068
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front, Rear
• Number of pins: 3

• Required quantity: 2
• Fitting Position: Rear Axle, Front Axle
• Supplementary Article/Info 2: without cable
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Brake Booster
• Brake System: ATE
• Manufacturer: ATE

• Component Number: 120-08-106
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Overall Length [mm]: 31
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: black
• paired article number: 30329
• Weight [kg]: 0.11
• Manufacturer: A.B.S.

• for OE number: 442 7657
• Cable Length [mm]: 190
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 29
• Connector Shape: oval
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJ-V8
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV744
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV107
• Manufacturer: ESEN SKV

• Number of pins: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Engine Code: 2B(AJ33)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: 2B(AJ33)
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Number of pins: 6
• Number of circuits: 5
• Socket colour: black
• Thread Size: M18 x 1,5
• Weight [kg]: 0.152
• Length [mm]: 400
• for OE number: 1 688 499
• Conductor Number: 5
• Exhaust System: before catalytic converter
• Cable Length [mm]: 480
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Brake Booster
• Connector Shape: D Shape
• Number of pins: 3
• for OE number: 163 540 12 17
• Brake System: ATE
• Weight [kg]: 0.064
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Engine Code: AJ-V8
• for OE number: 22204-21010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• Manufacturer: DENSO
• Name: DN DMA-0113

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: A30645
• Vehicle Identification Number (VIN) to: A40264
• Exhaust System: for pre-catalytic converter
• for OE number: C2N3717
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 450
• Number of pins: 4
• Weight [g]: 102
• Gross Weight [g]: 135
• Manufacturer: DENSO
• Name: DN DOX-0430
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased Additional information: "Tootja: DENSO
X-TYPE (CF1), 06.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
X-TYPE (CF1), 06.01-
(kvaliteediklass: Q)"