• Engine Code: N73 B68 A
• Pressure [bar]: 0
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12x1,5
• Colour: brown
• Weight [kg]: 0.043
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Latching Connection
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 13621433077
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: N73 B68 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N73 B68 A
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Construction Year to: 12.2016
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 330
• Weight [kg]: 0.08
• Name: SW 33 10 3197
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2016
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 570
• for OE number: 7 569 930
• Quality: OE EQUIVALENT
• Name: SONDA LAMBDA BMW 1 05-
• Manufacturer: MD

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Quantity: 2
• Cable Length [mm]: 665
• Manufacturer: DELPHI

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 640
• Number of pins: 6
• Total Length [mm]: 780
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N73 B68 A
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Cable Length [mm]: 720
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.477
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Weight [kg]: 0.07
• Number of pins: 9
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2016
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 720
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258017130

• Engine Code: N73 B68 A
• Fitting Position: before catalytic converter
• Production date from: 01.09.2006
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 5
• Connector Shape: D Shape
• Length [mm]: 700
• Alternatively:
• Number of pins: 5
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N73 B68 A
• Fitting Position: before catalytic converter
• Production date from: 1.09.2006
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 700
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE