Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: Converter Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Manufacturer: SWAG
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: Converter Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 115
- Height [mm]: 225
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 1
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Length [mm]: 60
- Packing Type: Canister
-
Article number of the recommended special tool: V99-
1017 - Weight [kg]: 1.19
- Manufacturer: VAICO
Oil - manufacturer recommendation: CAT TO-2, ZF TE-ML 03D, ZF TE-ML 14A, Allison C-4, Renk Doromat, ZF TE-ML 11A, ZF TE-ML 17C, MAN 339 Typ Z-1/V-1, GM Dexron II D, ZF TE-ML 04D, Mercedes Benz 236,1, Voith 55,6335,32, Ford Mercon General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Height [mm]: 225
-
Article number of the recommended special tool: V99-
1017 - Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 1
- Chemical Properties: Contains mineral oil
- Length [mm]: 60
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
SAE viscosity class: 80W-
90 -
Weight [kg]: 0.94,
1.19 - Observe service information:
- Packing Type: Bottle
- Width [mm]: 115
- Quantity Unit: Box
- Manufacturer: VAICO
Oil - manufacturer recommendation: ZF TE-ML 17A, ZF TE-ML 02B, MIL-L-2105, API GL-4, MAN 341 Typ Z2, MAN 341 Typ E1, Mercedes Benz 235,1, Ford SQM-2C-9008 A General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oil - manufacturer recommendation: MIL-
L- 2105 E, G 052 145 S2, 235.8 - Packing Type: Bottle
- Length [mm]: 60
- Transmission Type: for manual transmission
- Colour: yellow
- Height [mm]: 225
- Capacity [litre]: 1
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Oil: Full Synthetic Oil
- Observe service information:
- Width [mm]: 115
- Weight [kg]: 0.9
- Quantity Unit: Box
-
API specification: GL-
4, GL- 5, MT- 1 -
SAE viscosity class: 75W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.88
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: for automatic transmission, Converter Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.7
- Observe service information:
- Manufacturer: SWAG
- Lisainfo: 10 93 0017 SWA
- Additional information: 10 93 0017 SWA
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: for automatic transmission, Converter Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Height [mm]: 230
-
Article number of the recommended special tool: V99-
1017 - Length [mm]: 300
- Width [mm]: 115
- Weight [kg]: 4.567
- Quantity Unit: Box
- Packing Type: Canister
- Manufacturer: VAICO
Oil - manufacturer recommendation: Renk Doromat, Voith 55,6335,32, Allison C-4, ZF TE-ML 04D, ZF TE-ML 14A, MAN 339 Typ Z-1/V-1, CAT TO-2, ZF TE-ML 11A, GM Dexron II (D), Mercedes Benz 236,1, FORD MERCON, ZF TE-ML 17C, ZF TE-ML 03D, ATF II General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oil - manufacturer recommendation: API GL-
4, MIL- L- 2105 - Transmission Type: for manual transmission
-
Article number of the recommended special tool: V99-
1017 - Colour: yellow
- Packing Type: Canister
- Capacity [litre]: 5
- Chemical Properties: Contains mineral oil
-
Recommended change interval [km]: 80,
000 - Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Recommended change interval [years]: 5
- Width [mm]: 115
- Length [mm]: 300
- Height [mm]: 230
- Observe service information:
-
SAE viscosity class: 80W-
90 -
Weight [kg]: 4.49,
4.492 - Quantity Unit: Box
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.