• Filter type: In-Line Filter
• Weight [kg]: 0.07
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Ühendusfilter
• Pikkus (mm): 178
• Läbimõõt 1/Läbimõõt 2 (mm): 8,5
• Manufacturer: JAPKO

• Construction Year from: 11.1994
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Height [mm]: 42.2
• Width [mm]: 104
• Brake System: SUMITOMO
• Thickness [mm]: 13
• Manufacturer: LPR

• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 52
• Manufacturer: SNR /NTN-SNR/
• Name: SN GT370.00

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 104
• Height [mm]: 41.4
• Thickness [mm]: 12.7
• WVA Number: 21558
• Manufacturer: JAPANPARTS

• Engine Code: FE
• Camshaft: SOHC/OHC
• Diameter [mm]: 52
• Width [mm]: 29
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Width [mm]: 29
• Outer Diameter [mm]: 52
• Weight [kg]: 0.26
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 28.5
• Outer Diameter [mm]: 52
• Weight [kg]: 0.25
• Name: SW 83 03 0004
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 28.5
• Outer Diameter [mm]: 52
• Weight [kg]: 0.25
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: FEKG
• Construction Year to: 02.1995
• Braking/Drive Dynamics: for vehicles with ABS
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 70
• Height [mm]: 135
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D400-7289 D584-7464
• Test Mark: E1 90R-01878/449
• WVA Number: 21558
• Brake System: Sumitomo
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 104.3
• Width 2 [mm]: 103.9
• Height 1 [mm]: 42.1
• Height 2 [mm]: 42.1
• Thickness 1 [mm]: 12.2
• Thickness 2 [mm]: 12.2
• Name: DE LP624
• Manufacturer: DELPHI

• Engine Code: FEKG
• Construction Year to: 02.1995
• Number of Teeth: 168
• Length [mm]: 1,344
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Manufacturer: BOSCH

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 130,4
• Kõrgus (mm): 52,7
• Jämedus/Tugevus (mm): 14,4
• WVA-number: 21379
• Kontrolltähistus: ECE R90 APPROVED
• Manufacturer: JAPKO

• Driven Units: Camshaft
• Trim Level: HSN
• Number of Teeth: 168
• Width [mm]: 25.4
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear indicator
• Height [mm]: 42.2
• Width [mm]: 104
• Thickness [mm]: 13
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D399-7288 D514-7288
• Test Mark: E1 90R-01881/988
• WVA Number: 21378 21379 21380
• Brake System: Akebono
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 130
• Width 2 [mm]: 130
• Height 1 [mm]: 52.5
• Height 2 [mm]: 52.5
• Thickness 1 [mm]: 14.5
• Thickness 2 [mm]: 14.5
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Outer Diameter [mm]: 62
• Width [mm]: 28
• Lisainfo: Tensioner Pulley, timing belt
• Additional information: Tensioner Pulley, timing belt

• Driven Units: Camshaft
• Number of Teeth: 168
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.22
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: CON

• Length [mm]: 129.8
• Width [mm]: 52.3
• Test Mark: ECE R90 Not Required
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15, 16
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.299
• Name: SW 83 91 6282
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 130
• Width [mm]: 52
• Test Mark: ECE R90 Not Required
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15, 16
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.299
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: AKEBONO
• Wear Warning Contact: with acoustic wear warning
• Height [mm]: 56.1
• Width [mm]: 133.2
• Thickness [mm]: 15.5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Engine Code: FEKG
• Construction Year to: 02.1995
• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21378
• Thickness [mm]: 15
• Width [mm]: 118.8
• Height [mm]: 52.2
• Manufacturer Restriction: AKEBONO System
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Width [mm]: 26
• Outer Diameter [mm]: 52
• Weight [kg]: 0.3
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 168
• Width [mm]: 25.4
• Tooth Pitch [mm]: 8
• Length [mm]: 1,344
• Manufacturer: GATES PASKI PRZEWODY

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 2
• Number of Teeth 1: 108
• Manufacturer: SNR /NTN-SNR/

• Width [mm]: 25
• Number of Teeth: 168
• Belts: with rounded tooth profile
• Weight [kg]: 0.73
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hammastehulk 1: 135
• Laius 1 (mm): 25
• Manufacturer: ASHIKA

• Hammastehulk 1: 135
• Laius 1 (mm): 25
• Manufacturer: JAPKO

• Engine Code: FE
• Camshaft: SOHC/OHC
• Belt Width [mm]: 25.4
• Number of Teeth: 108
• Belts: with rounded tooth profile
• Manufacturer: SKF

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 2
• Number of Teeth 1: 168
• Manufacturer: SNR /NTN-SNR/
• Name: SN KD470.11

• Engine Code: FEK
• Camshaft: DOHC
• Belt Width [mm]: 25.4
• Colour: black
• Number of Teeth: 168
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMA94601

• Camshaft: DOHC
• Number of Teeth 1: 168
• Width 1 [mm]: 25.4
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 168
• Width [mm]: 25
• Length [mm]: 1,344
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 0.9
• Name: DA KTB831
• Manufacturer: DAYCO

• Driven Units: Camshaft
• Manufacturer: GATES ROZRZ¥DY KPL.

• Number of Teeth 1: 135
• Width 1 [mm]: 25
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: JPA

• Camshaft: SOHC/OHC
• Outer Diameter [mm]: 62
• Width [mm]: 28.5
• SVHC: No SVHC present!
• Manufacturer: INA