• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-ME-004
• Manufacturer: NTY

• Length [mm]: 95
• Wear Warning Contact: Change warning contact together with the pads
• Fabrication Number: HCZ-ME-001
• Manufacturer: NTY
• Name: NTY HCZ-ME-001

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 97
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Fitting Position: Front Axle
• Brake System: TRW
• Height [mm]: 71.5
• Width [mm]: 144
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Required quantity: 1
• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 92
• Weight [kg]: 0.005
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Length [mm]: 102
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 02.2017
• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 144
• Height [mm]: 71.6
• Thickness [mm]: 19.2
• WVA Number: 24869
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 4
• Supplementary Article/Info 2: with anti-squeak plate
• Vibration: with vibration damper
• Test Mark: ECE-R90
• Weight [kg]: 1.895
• Name: VA 302210
• Manufacturer: VALEO
• Additional information: 302 210 HP
• Lisainfo: 302 210 HP

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: TRW
• Length [mm]: 93
• Manufacturer: TRW
• Additional information: GIC242
• Lisainfo: GIC242

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Length [mm]: 97
• Number of connectors: 2
• Brake Type: Disc Brake
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 93
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Length [mm]: 97
• Number of connectors: 2
• Brake Type: Disc Brake
• Weight [kg]: 0.005
• Name: SW 10 93 9246
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 92.5
• Manufacturer: ATE
• Additional information: 24.8190-0067.2
• Lisainfo: 24.8190-0067.2

• Fitting Position: Front Axle
• Length [mm]: 94
• Brake Type: Disc Brake
• Manufacturer: BOSCH
• Name: BS 1987474553

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length 1 [mm]: 50
• Warning Contact Length [mm]: 97
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Wear Warning Contact: prepared for wear indicator
• Brake System: Lucas - TRW
• Width [mm]: 106
• Height [mm]: 59
• Thickness [mm]: 18
• Manufacturer: KAMOKA

• Thickness [mm]: 18.38
• Length [mm]: 106.55
• Height 1 [mm]: 59.28
• Brake System: TRW
• WVA Number: 24848
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Width [mm]: 106.4
• Height [mm]: 58.9
• Thickness [mm]: 18.3
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Thickness [mm]: 18.9
• Length [mm]: 144.1
• Height 1 [mm]: 71.6
• WVA Number: 24869
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Width [mm]: 144
• Height [mm]: 71.6
• Thickness [mm]: 19.3
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Width [mm]: 144
• Height [mm]: 72
• Thickness [mm]: 19
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Width 1 [mm]: 106.5
• Height 1 [mm]: 59
• Thickness 1 [mm]: 18.5
• Brake System: TRW
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.3
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Thickness 1 [mm]: 18.4
• Supplementary Article/Supplementary Info: with accessories
• Number of pads: 4
• Test Mark: ECE R90 APPROVED
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: TOPRAN HANS PRIES

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact, Change warning contact together with the pads General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Thickness [mm]: 18.4
• Width [mm]: 106.4
• Height [mm]: 59.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Thickness [mm]: 18.5
• Width [mm]: 106.4
• Height [mm]: 59.1
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Weight [kg]: 1.2
• Manufacturer: TOMEX BRAKES

• Construction Year from: 02.2017
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 107
• Height [mm]: 59
• Thickness [mm]: 18
• WVA Number: 24848
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.092
• Manufacturer: VALEO
• Name: VA 302411

• Fitting Position: Rear Axle
• FMSI Code: D1646-8874
• Test Mark: E9 90R-01825/3188
• WVA Number: 24848
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 106.6
• Width 2 [mm]: 106.6
• Height 1 [mm]: 58.6
• Height 2 [mm]: 58.6
• Thickness 1 [mm]: 18.2
• Thickness 2 [mm]: 18.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2289

• Fitting Position: Front Axle
• WVA Number: 24869
• Test Mark: E9 90R-02A0823/3474
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 144
• Height 1 [mm]: 72
• Thickness 1 [mm]: 19
• Quality class: PJ
• Name: Brake pads

• for OE number: 000 420 3002
• Fitting Position: Front Axle
• Manufacturer: TRUCKTEC

• Length [mm]: 106
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.2
• Supplementary Article/Info 2: with fastening material
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 106.2
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.2
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Thickness [mm]: 19.5
• Width [mm]: 144
• Height [mm]: 71.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Weight [kg]: 2.2
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Thickness 1 [mm]: 19.5
• Test Mark: ECE R90 APPROVED
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 144
• Width [mm]: 71.7
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 19.5
• Brake System: TRW
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.03
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• FMSI Code: D1694-8920
• Test Mark: E9 90R-02A0823/3474
• WVA Number: 24869
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 144.4
• Width 2 [mm]: 144.4
• Height 1 [mm]: 71.7
• Height 2 [mm]: 71.7
• Thickness 1 [mm]: 19.2
• Thickness 2 [mm]: 19.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2441

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 18.4
• Length [mm]: 106.2
• Height [mm]: 59.2
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: TRW
• WVA Number: 24848
• Name: SK VKBP90056
• Manufacturer: SKF

• Length [mm]: 144
• Width [mm]: 71.7
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 19.5
• Brake System: TRW
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.03
• Supplementary Article/Info 2: with fastening material
• Name: SW 10 91 6870
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with bolts/screws
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24869
• Number of bolts/screws: 4
• Thickness [mm]: 19.2
• Width [mm]: 144.4
• Height [mm]: 71.7
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 106.4
• Height [mm]: 58.9
• Thickness [mm]: 18.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 24848
• Brake System: TRW
• Observe mounting information:
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1.2
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 106.6
• Height [mm]: 59.1
• Thickness [mm]: 18.5
• Wear Warning Contact: prepared for wear indicator
• Brake Disc Type: Vented
• Test Mark: E9 90R - 01120/3183
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 24848
• Test Mark: E20 90R-02A0134/0039
• Length [mm]: 106.4
• Thickness [mm]: 18.4
• Height [mm]: 58.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with bolts/screws
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24848
• Thickness [mm]: 18.4
• Width [mm]: 106.4
• Height [mm]: 58.6
• Number of bolts/screws: 4
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 106.6
• Height [mm]: 59
• Thickness [mm]: 18.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Fulfils ECE norm: R90
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• Article number of recommended accessories: 109-1881
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Width [mm]: 106
• Thickness [mm]: 19
• Height [mm]: 59
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24848
• Name: BR P 50 140
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Number of pads: 4
• Thickness [mm]: 19.1
• Length [mm]: 143.9
• Height [mm]: 71.6
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 24869
• Name: SK VKBP80028
• Manufacturer: SKF

• Fitting Position: Front Axle
• Article number of recommended accessories: MWI0528
• Width [mm]: 144
• Height [mm]: 71.5
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24869
• Brake System: TRW
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 2
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Width [mm]: 144
• Thickness [mm]: 19
• Height [mm]: 72
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• WVA Number: 24869
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Width [mm]: 144
• Height [mm]: 71.7
• Thickness [mm]: 19.5
• Wear Warning Contact: prepared for wear indicator
• Manufacturer Restriction: TRW
• Test Mark: E9 90R - 01107/3217
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 24869
• Test Mark: E20 90R-02A0124/084
• Length [mm]: 144
• Thickness [mm]: 19
• Height [mm]: 71.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 106
• Height [mm]: 59
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with sliding plate

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 295
• paired article number: 563140JC, 563140JC-1
• Thickness [mm]: 18.4
• Test Mark: R90 Homologated
• Width [mm]: 106.6
• Height [mm]: 59.3
• Weight [kg]: 1.25
• Height 1 [mm]: 59.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Box
• WVA Number: 24848
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Number of threaded bolts: 4
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 107
• Height [mm]: 59
• Thickness [mm]: 19
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Width [mm]: 106.2
• Height [mm]: 59
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Manufacturer: MEYLE

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Fitting Position: Front Axle
• Width [mm]: 144
• Height [mm]: 71.6
• Thickness [mm]: 19.3
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0334/0013
• MAPP code available:
• Article number of recommended accessories: 24.8190-0067.2
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width [mm]: 144
• Height [mm]: 71.5
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Fulfils ECE norm: R90
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Width [mm]: 106.4
• Height [mm]: 58.9
• Thickness [mm]: 18.3
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0498/0033
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Brake System: TRW
• Width 1 [mm]: 107
• Height [mm]: 59
• Thickness [mm]: 19
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with spring
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Width [mm]: 106.3
• Height [mm]: 58.9
• Thickness [mm]: 18.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 24848
• Brake System: TRW
• Name: HE 8DB355021791
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 295, 320
• Thickness [mm]: 18.9
• Test Mark: R90 Homologated
• Width [mm]: 144.1
• Height [mm]: 71.6
• Weight [kg]: 2.021
• Height 1 [mm]: 71.6
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Box
• WVA Number: 24869
• Packaging length [cm]: 18
• Packaging width [cm]: 11.5
• Packaging height [cm]: 8.5
• Number of threaded bolts: 4
• Number of clips: 8
• Manufacturer: JURID

• Fitting Position: Front Axle
• Width [mm]: 144
• Height [mm]: 71.6
• Thickness [mm]: 19.3
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0258/0015
• MAPP code available:
• Article number of recommended accessories: 24.8190-0067.2
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 144
• Height [mm]: 72
• Thickness [mm]: 20
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Width [mm]: 144
• Thickness [mm]: 19
• Height [mm]: 72
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• WVA Number: 24869
• Manufacturer: BREMBO
• Name: BR P 50 093X

General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Width [mm]: 106.4
• Height [mm]: 58.9
• Thickness [mm]: 18.3
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0258/0034
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.