Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Type: 7-
Speed Automatic Transmission - Thickness [mm]: 1.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- DIN/ISO: 7603
- Material: Copper
- Shape: A Shape
- Weight [kg]: 0.001
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
- Lisainfo: 04054 FEBI
- Additional information: 04054 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Automatic Transmission - Quantity per packing unit: 25
- Material: Copper
- Inner Diameter [mm]: 12.5
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 17
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Material: Copper
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 20
- Weight [kg]: 0.007
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.001
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: OM 651.921
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Manufacturer: AJUSA
- Length [mm]: 33
-
Thread Size: M14 x 1,
50 - Manufacturer: 3RG
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.04
- Supplementary Article/Info 2: without seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Additionally required articles (article numbers): 259.150.100
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
- Name: SULGURKRUVI
- Manufacturer: FIS
-
Transmission Type: 7-
Speed Automatic Transmission - Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 12
- Weight [kg]: 0.011
- Supplementary Article/Info 2: without seal ring
- Name: SULGURKRUVI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Automatic Transmission - Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Screw length below head [mm]: 12
- Weight [kg]: 0.012
- for OE number: 000908 012009 S2
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
- Additional information: FE46409
- Lisainfo: FE46409
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
- Supplementary Article/Info 2: with seal ring
- Name: SULGURKRUVI
- Manufacturer: FIS
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
-
Manufacturer: ENERGY-
NARZÊDZIA WARSZTATOWE
-
Thread Size: M14 x 1,
5 - Screw length below head [mm]: 24
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Length [mm]: 33
- Material: Steel
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FAST
- Quantity per packing unit: 5
- Fitting Position: engine sided
- Thread Length [mm]: 24
- Thread Pitch [mm]: 1.5
- Required quantity: 1
- Material: Steel
-
Surface: Zinc-
coated -
Thread Size: M14 x 1,
5 - Supplementary Article/Info 2: with seal ring
- Length [mm]: 33
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0.048
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 6-
Speed Automatic Transmission - Material: Steel
-
Thread Size: M8x1,
0 - Length [mm]: 10
- Screw length below head [mm]: 7.5
- Bolt Head-/Nut Design: Female Torx
- Spanner Size: 4
- Seal Material: Copper
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
-
Transmission Type: 7-
Speed Automatic Transmission - Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Tin-
plated - Screw length below head [mm]: 13
- Weight [kg]: 0.011
- Supplementary Article/Info 2: with seal ring
- for OE number: 000908 012009 S1
- Name: SULGURKRUVI
- Manufacturer: FEB
- Lisainfo: 46398 FEBI
- Additional information: 46398 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Oil Sump Material: Plastic
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
- Material: Plastic
- Oil Sump Material: Plastic
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Thread Pitch [mm]: 2.5
-
Material: Polyamid 6.6,
GRP (Glass fibre Reinforced Plastic) - Bolt Head-/Nut Design: Slot
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 38
- Outer Diameter [mm]: 28
- Thread Length [mm]: 25
- Material: Plastic
- Surface: Blank
- Weight [kg]: 0.013
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Outer Diameter [mm]: 28
- Thread Length [mm]: 25
- Material: Plastic
- Surface: Blank
- Weight [kg]: 0.013
- Supplementary Article/Info 2: with seal ring
- Name: SW 10 10 8016
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 31
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: FIS
- Material: Plastic
- Length [mm]: 38
- Screw length below head [mm]: 35
-
Seal Material: FKM
(fluorocarbon rubber) - Packing Type: Bag
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks