• Length [mm]: 133
• External Thread Size: M14 x 1,5
• Quality/ Grade: 10.9
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Screw length below head [mm]: 120
• Weight [kg]: 0.173
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 332
• Inner Diameter [mm]: 12
• Name: ALT 87560AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Semi-Trailing Arm
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: ZWT-ME-017
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: outer, Lower, Front, Rear Axle, Left, Right
• Material: Sheet Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 372
• Width [mm]: 59
• Height [mm]: 55
• Manufacturer: DELPHI
• Name: DE TC3217

• Control/Trailing Arm Type: Semi-Trailing Arm
• Fitting Position: Rear Axle Right, Upper, Front
• Fabrication Number: ZWT-ME-016
• paired article number: ZWT-ME-015

• Control/Trailing Arm Type: Semi-Trailing Arm
• Fitting Position: Rear Axle Left, Upper, Front
• Fabrication Number: ZWT-ME-015
• paired article number: ZWT-ME-016

• Fitting Position: Rear Axle both sides
• Control/Trailing Arm Type: Control Arm
• Outer Diameter 2 [mm]: 12
• Length [mm]: 331.5
• Weight [kg]: 0.5
• Manufacturer: RTS

• Fitting Position: Rear Axle
• Weight [kg]: 0.545
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 40
• Packaging width [cm]: 5
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear, Rear Axle Left, Upper
• Article number of the recommended special tool: V99-1020
• paired article number: V30-7624
• Axle alignment required after fitting:
• Weight [kg]: 0.68
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle Left, Lower
• Article number of the recommended special tool: V99-1020
• paired article number: V30-7620
• Axle alignment required after fitting:
• Weight [kg]: 0.55
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, outer, Centre, Front, Left, Lower
• Material: Aluminium
• paired article number: TC2844
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 320
• Width [mm]: 73
• Height [mm]: 55
• Manufacturer: DELPHI
• Name: DE TC2843

• Material: Aluminium
• paired article number: TC2843
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 320
• Width [mm]: 73
• Height [mm]: 55
• Manufacturer: DELPHI

Fitting Position: Rear Axle Right, outer, Centre, Front, Right, Lower

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Right
• Net weight [kg]: 0.46
• Diameter [mm]: 12
• Length [mm]: 265
• paired article number: G41.4561/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4560/S
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Left
• Net weight [kg]: 0.458
• Diameter [mm]: 12
• Length [mm]: 265
• paired article number: G41.4560/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4561/S
• Manufacturer: OMG

• Fitting Position: Rear Axle Left, outer, Front, Left, Upper
• Material: Aluminium
• paired article number: TC2564
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 372
• Width [mm]: 40
• Height [mm]: 84
• Manufacturer: DELPHI
• Name: DE TC2563

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle Left, Upper, Front
• paired article number: V30-7622
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 0.55
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Lower, Left
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395499
• Manufacturer: CORTECO
• Name: COC 49395500

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Upper
• Length [mm]: 265
• Inner Diameter [mm]: 12
• paired article number: 87442AL
• Name: ALT 87443AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Lower
• Length [mm]: 265
• Inner Diameter [mm]: 12
• paired article number: 87443AL
• Name: ALT 87442AL
• Manufacturer: ALTE AUTOMOTIVE

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37799
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 40.4
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Centre
• Weight [kg]: 0.465
• Manufacturer: FEBI
• Additional information: FE37798
• Lisainfo: FE37798

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37798
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 40.4
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Centre
• Weight [kg]: 0.465
• Manufacturer: FEBI BILSTEIN
• Additional information: FE37799
• Lisainfo: FE37799

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Right
• Net weight [kg]: 0.569
• Diameter [mm]: 12
• Length [mm]: 312
• paired article number: G41.4565/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4564/S
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Left
• Net weight [kg]: 0.671
• Diameter [mm]: 12
• Length [mm]: 343
• paired article number: G41.4562/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4563/S
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Right
• Net weight [kg]: 0.674
• Diameter [mm]: 12
• Length [mm]: 343
• paired article number: G41.4563/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4562/S
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Rear Axle Left
• Net weight [kg]: 0.57
• Diameter [mm]: 12
• Length [mm]: 312
• paired article number: G41.4564/S
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4565/S
• Manufacturer: OMG

• Fitting Position: Rear Axle Lower, Right
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395500
• Manufacturer: CORTECO
• Name: COC 49395499

• Fitting Position: Rear Axle Left, Lower, outer
• Control/Trailing Arm Type: Control Arm
• paired article number: S061567
• Manufacturer: GSP

• Fitting Position: Rear Axle Right, Lower, outer
• Control/Trailing Arm Type: Control Arm
• paired article number: S061566
• Manufacturer: GSP

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37795
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 43.8
• Material: Aluminium
• Rod/Strut: Pull Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Upper, Front
• Weight [kg]: 0.565
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37796
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 43.8
• Material: Aluminium
• Rod/Strut: Pull Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Upper, Front
• Weight [kg]: 0.565
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Upper, Right, Front
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395498
• Manufacturer: CORTECO
• Name: COC 49395497

• Fitting Position: Rear Axle Upper, Left, Front
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395497
• Name: COC 49395498
• Manufacturer: CORTECO

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right
• Length [mm]: 312
• Inner Diameter [mm]: 12
• paired article number: 87446AL
• Name: ALT 87447AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left
• Length [mm]: 312
• Inner Diameter [mm]: 12
• paired article number: 87447AL
• Name: ALT 87446AL
• Manufacturer: ALTE AUTOMOTIVE

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37794
• Length [mm]: 343
• Inner Diameter [mm]: 12.2
• Rod/Strut: Guide Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Upper, Rear
• Weight [kg]: 0.68
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for vehicle identification number (VIN): LE4**************
• paired article number: 37793
• Length [mm]: 343
• Inner Diameter [mm]: 12.2
• Rod/Strut: Guide Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Upper, Rear
• Weight [kg]: 0.68
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Control/Trailing Arm Type: Semi-Trailing Arm
• Inner Diameter [mm]: 12.2
• Length [mm]: 265
• Weight [kg]: 0.462
• Manufacturer: RTS

• Fitting Position: Rear Axle Right, Upper, Front
• Control/Trailing Arm Type: Control Arm
• Diameter 2 [mm]: 12.2
• Length [mm]: 371.8
• Weight [kg]: 0.579
• Manufacturer: RTS

• Fitting Position: Rear Axle Left, Upper, Rear
• Control/Trailing Arm Type: Control Arm
• Inner Diameter [mm]: 12.2
• Length [mm]: 342.6
• Weight [kg]: 0.684
• Manufacturer: RTS

• Fitting Position: Rear Axle Left, Lower, Front
• Control/Trailing Arm Type: Semi-Trailing Arm
• Material: Aluminium
• paired article number: 821 0778 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Right, Upper
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395496
• Manufacturer: CORTECO
• Name: COC 49395495

• Fitting Position: Rear Axle Left, Upper
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49395495
• Manufacturer: CORTECO
• Name: COC 49395496

• Fitting Position: Rear Axle Right, Upper, Rear
• Control/Trailing Arm Type: Semi-Trailing Arm
• Material: Aluminium
• paired article number: 821 0779 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Right, Upper, Front
• Control/Trailing Arm Type: Semi-Trailing Arm
• Material: Aluminium
• paired article number: 821 0781 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Construction Year from: 09.2015
• Fitting Position: Rear Axle, Right, outer, Upper
• Weight [kg]: 0.77
• Required quantity: 1
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: L23586
• Packaging length [cm]: 41
• Packaging width [cm]: 10
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Construction Year from: 09.2015
• Fitting Position: Rear Axle, Left, outer, Upper
• Weight [kg]: 0.77
• Required quantity: 1
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: L23585
• Packaging length [cm]: 41
• Packaging width [cm]: 10
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Upper, Front Axle, outer, Right
• Fabrication Number: ZWG-ME-007
• paired article number: ZWG-ME-006
• Manufacturer: NTY

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Upper, Front Axle, outer, Left
• Fabrication Number: ZWG-ME-006
• paired article number: ZWG-ME-007
• Manufacturer: NTY

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Front Axle Right
• Net weight [kg]: 2,117
• Thread Size: M16x1,5
• Thread Size 1: M16x1,5
• paired article number: G40.8159/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8158/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Front Axle Left
• Net weight [kg]: 2.12
• Thread Size: M16x1,5
• Thread Size 1: M16x1,5
• paired article number: G40.8158/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8159/C
• Manufacturer: OMG

• Trim Level: EXC. 3.0 - 4.0L AMG
• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front Axle Left
• Cone Size [mm]: 14.7
• Material: Aluminium
• Rod/Strut: Push Rod
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Trim Level: EXC. 3.0 - 4.0L AMG
• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front Axle Right
• Cone Size [mm]: 14.7
• Material: Aluminium
• Rod/Strut: Push Rod
• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Front Axle Right
• Net weight [kg]: 1,507
• Thread Size: M14x1,5
• Thread Size 1: M14x1,5
• paired article number: G40.8161/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8160/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Aluminium
• Fitting Position: Front Axle Left
• Net weight [kg]: 1.51
• Thread Size: M14x1,5
• Thread Size 1: M14x1,5
• paired article number: G40.8160/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8161/C
• Manufacturer: OMG

• Fitting Position: Upper, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• paired article number: S062802
• Manufacturer: GSP

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Left
• Supplementary Article/Info 2: with nut, with rubber mount, with ball joint
• paired article number: 409 252
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Right
• Supplementary Article/Info 2: with ball joint, with nut, with rubber mount
• paired article number: 409 251
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, outer, Upper
• Thread Size 1: M14 x 1,50 x 14,5
• Thread Size 2: Bush Ø10,0 / Ø10,0 m
• Material: Aluminium
• paired article number: TC7817
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 330
• Width [mm]: 281
• Height [mm]: 84
• Name: DE TC7816
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right, outer, Upper
• Thread Size 1: M14 x 1,50 x 14,5
• Thread Size 2: Bush Ø10,0 / Ø10,0 m
• Material: Aluminium
• paired article number: TC7816
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 330
• Width [mm]: 281
• Height [mm]: 84
• Name: DE TC7817
• Manufacturer: DELPHI

• Braking/Drive Dynamics: for vehicles with Airmatic DC
• not for country specific design: China, Thailand
• Fitting Position: Rear, Lower, Front Axle, both sides
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 340
• Required quantity: 2
• Material: Aluminium
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Mounting points diameter [mm]: 14.2
• External Thread [mm]: M16 x 1,50 RHT M
• Cone Size 1 [mm]: 16
• Cone Size 2 [mm]: 23.8
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right, outer, Lower, Front
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Control/Trailing Arm Type: Trailing Arm
• Manufacturer: DELPHI

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 177895
• External Thread Size: M16 x 1,5
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, Front
• Weight [kg]: 2.52
• Supplementary Article/Info 2: with ball joint, with bearing, with nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 172771
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 21.8
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Right
• Weight [kg]: 1.61
• Supplementary Article/Supplementary Info: with lock nuts
• Supplementary Article/Info 2: with bearing, with ball joint
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking/Drive Dynamics: for vehicles without Airmatic DC
• not for country specific design: China, Thailand
• Fitting Position: Rear, Lower, Front Axle, both sides
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 340
• Required quantity: 2
• Material: Aluminium
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Mounting points diameter [mm]: 14.2
• External Thread [mm]: M16 x 1,50 RHT M
• Cone Size 1 [mm]: 16
• Cone Size 2 [mm]: 23.8
• Manufacturer: OPTIMAL ZAWIESZENIE

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 33 10 4358
• External Thread Size: M16 x 1,5
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front
• Weight [kg]: 2.52
• Supplementary Article/Info 2: with ball joint, with nut, with bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Upper
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 1.48
• External Thread 2 [mm]: M14x1,5
• Manufacturer: RTS

• Fitting Position: Front Axle Right, Upper
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 1.48
• External Thread 2 [mm]: M14x1,5
• Manufacturer: RTS

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 33 10 4357
• External Thread Size: M16 x 1,5
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, Front
• Weight [kg]: 2.52
• Supplementary Article/Info 2: with ball joint, with nut, with bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Lower, Front
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49426683
• Name: COC 49426682
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right, outer, Upper
• Cone Size [mm]: 14.7
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 267
• Control/Trailing Arm Type: Control Arm
• as standard:
• Thread Size: M14X1,5 RHT
• paired article number: 211847
• Weight [kg]: 1.43
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• paired article number: 172770
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 21.8
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Left
• Weight [kg]: 1.61
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, outer, Lower
• Cone Size [mm]: 16
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 447
• Control/Trailing Arm Type: Control Arm
• as standard:
• Thread Size: M16X1,5 RHT
• paired article number: 210454
• Weight [kg]: 2.658
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right, outer, Lower
• Cone Size [mm]: 16
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 447
• Control/Trailing Arm Type: Control Arm
• as standard:
• Thread Size: M16X1,5 RHT
• paired article number: 210453
• Weight [kg]: 2.658
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for OE number: 205 330 5601
• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Front Axle Left, outer, Upper
• Cone Size [mm]: 14.7
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 267
• Control/Trailing Arm Type: Control Arm
• as standard:
• Thread Size: M14X1,5 RHT
• paired article number: 211848
• Weight [kg]: 1.443
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: 174777
• External Thread Size: M16 x 1,5
• Cone Size [mm]: 23.7
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, Front
• Weight [kg]: 2.658
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer, Lower, Rear, Left, Right
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Manufacturer: DELPHI

• paired article number: 176673
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 21.8
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Left
• Weight [kg]: 1.78
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 176674
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 21.8
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Front Axle Right
• Weight [kg]: 1.78
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• not for country specific design: USA
• not for vehicle production country: China
• Fitting Position: Lower, Front, Front Axle, Left
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 447
• Required quantity: 1
• Cone Size [mm]: 16
• Material: Aluminium
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Mounting points diameter [mm]: 14.2
• paired article number: G5-1086
• External Thread [mm]: M16 x 1,50 RHT M
• Manufacturer: OPTIMAL ZAWIESZENIE

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle Right, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount, with ball joint
• paired article number: 58167801
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle Left, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount, with ball joint
• paired article number: 58167902
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: 33 10 2390
• External Thread Size: M16 x 1,5
• Cone Size [mm]: 23.7
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front
• Weight [kg]: 2.658
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Lower, Front, Front Axle, Left
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 447
• Required quantity: 1
• Cone Size [mm]: 16
• Material: Aluminium
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Mounting points diameter [mm]: 14.2
• paired article number: G5-1084
• External Thread [mm]: M16 x 1,50 RHT M
• Manufacturer: OPTIMAL ZAWIESZENIE

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Right, Lower, Front, Front Axle
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 447
• Required quantity: 1
• Cone Size [mm]: 16
• Material: Aluminium
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Mounting points diameter [mm]: 14.2
• paired article number: G5-1083
• External Thread [mm]: M16 x 1,50 RHT M
• Manufacturer: OPTIMAL ZAWIESZENIE

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with accessories
• Cone Size [mm]: 23.5
• Cone Pitch: 1:3
• Thread Size: M16x1,5
• Fitting Position: Front Axle, Lower, Left, Front
• paired article number: JTC3044
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left, Lower, Front
• Material: Aluminium
• paired article number: 38867 01
• Manufacturer: LEMFÖRDER