Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)


- for OE number: 000 905 06 00
- Width [mm]: 33
- Height [mm]: 30
- Length [mm]: 58
- Guarantee: 3 years guarantee
- Number of pins: 2
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.


- Engine Code: M 276.824
-
for article number: 7.8776,
7.8875 - Manufacturer: FACET


- Engine Code: M 276.824
-
for article number: 1.880.776,
1.880.875 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS


-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Mounting Type: Clamped
- Manufacturer: HELLA
- Name: HE 6PT358058191
Brief Information: *** HELLA Electronics OE competence for over 60 years.





- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY































































- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






























-
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS





- Number of pins: 3
-
Fabrication Number: ECM-
ME- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





























-
Name: Andur,
kompressorirohk - Manufacturer: BOS





- Number of pins: 3
- Connector Shape: oval
- Manufacturer: ERA


- Number of pins: 3
- Supplementary Article/Info 2: without connection line
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Suction pipe connector diameter [mm]: 8.8
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

- Exhaust System: before soot particulate filter
- Number of pins: 3
- Opening pressure [kPa]: 5
- Manufacturer: DLP
Name: CZUJNIK CIN. SPALIN DB A (W177), C (W205) 1,3-3,0 15-

- Number of pins: 3
- Manufacturer: VDO



- Number of pins: 3
- Version: IAM
- Manufacturer: METZGER





























- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
-
Name: ANDUR,
KTUSEROHK - Manufacturer: BOS


- Engine Code: M 276.824
-
Fitting Position: Left,
Right, Front, after catalytic converter - Required quantity: 2
- Cable Length [mm]: 300
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.998.175
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased






-
Transmission Type: 7-
Speed Automatic Transmission - Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Fitting Position: before catalytic converter
- Cable Length [mm]: 530
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY






-
Transmission Type: 7-
Speed Automatic Transmission - Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Fitting Position: before catalytic converter
- Cable Length [mm]: 540
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY


-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
- Length [mm]: 500
- Name: Lambda andur
- Manufacturer: MAX


- Number of pins: 4
- Connector Shape: oval
- Socket colour: black
- Fuel Type: Petrol
- Supplementary Article/Info 2: High Pressure Side
- for OE number: 2781530728
- Manufacturer: MEAT&DORIA


- Engine Code: M 276.824
-
Fitting Position: Left,
Right, Front, before catalytic converter - Required quantity: 2
- Cable Length [mm]: 450
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.468
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased




-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905



-
Transmission Type: 9-
Speed Automatic Transmission - Block Separation:
-
for special equipment code: 917,
935, 460, 494, 835 - Oxygen Sensor: Broadband Oxygen Sensor
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 400
- Number of pins: 6
- Name: Lambda andur
- Manufacturer: MEY
Fitting Position: before catalytic converter, Bench 1, behind exhaust turbocharger, Bench 2





-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV






























- Oxygen Sensor: Regulating Sensor
-
Fitting Position: before catalytic converter,
Right -
Transmission Type: 9-
Speed Automatic Transmission - Number of circuits: 5
- Overall Length [mm]: 350
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS



-
Fitting Position: before catalytic converter,
Left, Right - Block Separation:
- not for special equipment code: 421
- Oxygen Sensor: Broadband Oxygen Sensor
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 570
- Number of pins: 6
- Name: Lambda andur
- Manufacturer: MEY



- Construction Year to: 10.2017
- Engine Code: 276.824
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 450
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368402
Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated


- Engine Code: M 276.824
-
Transmission Type: not for 9-
speed automatic transmission -
Fitting Position: before catalytic converter,
Right, Left - Block Separation:
-
Oxygen Sensor: Regulating Sensor,
Heated - Voltage [V]: 12
- Conductor Number: 5
- Cable Length [mm]: 500
- Number of pins: 6
- Name: LAMBDA ANDUR
- Manufacturer: PIE