• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: OM 651.930
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• Engine Code: OM 651.930
• for article number: 1.880.776, 1.880.875
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Emission Standard: Euro 5, Euro 6
• Transmission Type: Manual Transmission
• Fabrication Number: ECS-AU-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Material: Plastic
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 8
• Fabrication Number: ECS-AU-004
• Manufacturer: NTY

• Engine Code: OM 651.930
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: MEYLE

• Fabrication Number: ECM-ME-006
• Manufacturer: NTY

• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Engine Number to: 31533569
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Fabrication Number: ECS-ME-000
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 6
• Manufacturer: NRF

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: DE SS12309-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 8
• Fabrication Number: ECS-PL-002
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Thread Size: M12
• Thread Pitch [mm]: 1.25
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spanner Size: 19
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Fabrication Number: ECS-ME-001
• Manufacturer: NTY

• Number of pins: 3
• for OE number: 642 905 02 00
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI
• Name: DE PS10140

• not for emission standard: Euro 6
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Emission Standard: Euro5/Euro6
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 108,000
• for OE number: 6429050200
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Fitting Position: High Pressure Pump (high pressure side)
• Vehicle Identification Number (VIN) to: 30401960
• Block Separation:
• Vehicle Identification Number (VIN) from: 30401961
• Observe technical data:
• Manufacturer Restriction: Mercedes-Benz, VAG
• Number of pins: 2
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• suited for engine type: Petrol Injection
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, sissepritseklapp
• Manufacturer: HBE

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Emission Standard: Euro 6
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV670

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• for OE number: 009 153 52 28
• Number of connectors: 3
• Fabrication Number: ECS-ME-003
• Manufacturer: NTY

• Emission Standard: Euro 6
• for OE number: 007 153 60 28
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Engine Code: OM 651.930
• alternative OE number: 0061539728
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Output Voltage, from [V]: 0.503
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.106
• Manufacturer: EPS

• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: FAST

• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 10
• Spanner Size: 24
• Housing Colour: black
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 642 905 0200
• Manufacturer: TRUCKTEC

• Number of pins: 3
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 46.4
• Thread Size: M12x1,5 mm
• Material: Plastic
• Number of pins: 3
• Height [mm]: 23.9
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Housing material: Aluminium
• Pressure from [kPA]: 0
• Pressure to [kPA]: 600
• Manufacturer: SKV GERMANY
• Name: CE 17SKV780

• Number of mounting bores: 1
• for OE number: 642 905 02 00
• Weight [kg]: 0.036
• Connector Shape: D Shape
• Number of circuits: 2
• Emission Standard: Euro5/Euro6
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for two-part exhaust system
• Connector Shape: oval
• Number of pins: 3
• Pressure [Pa] from: 50,000
• Pressure [Pa] to: 700,000
• Manufacturer: NRF

• alternative OE number: 0051535028
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 000 905 85 01
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Exhaust System: for soot particulate filter
• Line insulation design: with corrugated tube insulation
• Fabrication Number: EGT-ME-025
• Cable Length [mm]: 730
• Manufacturer: NTY

• Number of connectors: 3
• Manufacturer: FAST

• Number of connectors: 3
• for OE number: 009 153 52 28
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.04
• for OE number: 642 905 02 00
• Name: SW 33 10 3838
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 02.2015
• Engine Code: 651.930
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO

• Fitting Position: Pipe at EGR valve
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Spanner Size: 24
• Number of pins: 3
• Supplementary Article/Info 2: without seal ring
• Connector Shape: oval
• Housing Colour: black
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: OM 651.930
• Emission Standard: Euro5/Euro6
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• not for emission standard: Euro 6
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Construction Year from: 03.2015
• Number of pins: 3
• Colour: black
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Emission Standard: Euro5/Euro6
• Connector Shape: D Shape
• Manufacturer: FAST

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Name: CE 17SKV594
• Manufacturer: ESEN SKV

• not for SA code: 929K, 930K, 940K, F205, F222
• for OE number: 009 153 51 28
• Weight [kg]: 0.04
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Emission Standard: Euro 6
• for OE number: A007 153 6028
• Block Separation:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE DPS00013

• not for emission standard: Euro 6
• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 2
• Pressure from [kPA]: -2
• Pressure to [kPA]: 108
• for OE number: A 642 905 02 00
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Mounting Type: Bolted
• for OE number: 007 153 03 28, 651 905 02 00
• Manufacturer: MEAT&DORIA

• Construction Year from: 02.2016
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 700
• Overall Length [mm]: 865
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.08
• Manufacturer: VALEO

• not for SA code: 929K, 930K, 940K, F205, F222
• Number of pins: 3
• Fitting Position: EGR Valve
• Quality: IAM
• Manufacturer: METZGER

• Emission Standard: Euro 6, Euro 5
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Manufacturer: MEYLE

• Fitting Position: before exhaust turbocharger
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 210
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Number of pins: 3
• Connector Shape: oval
• Fastening Type: Threaded Sleeve
• for OE number: 009 153 52 28
• Manufacturer: MEAT&DORIA

• Engine Code: OM 651.930
• Emission Standard: Euro 6
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.263
• Output Voltage, up to [V]: 4.721
• Name: EP 1.993.380
• Manufacturer: EPS

• Construction Year from: 02.2016
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 230
• Overall Length [mm]: 325
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.08
• Manufacturer: VALEO

• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Manufacturer: SKV GERMANY

• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 230
• Weight [kg]: 0.035
• Name: Andur, heitgaasitemperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Manufacturer: FAST

• Voltage [V]: 12
• Cable Length [mm]: 250
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.07
• Operating Mode: Electric
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Cable Length [mm]: 265
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Operating Mode: Electric
• Manufacturer: SKV GERMANY

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Number of connectors: 3
• Weight [kg]: 0.034
• for OE number: 009 153 52 28
• Name: Andur, heitgaasisurve
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Opening pressure [kPa]: 49
• Name: DE DPS00034-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Name: CE 17SKV776
• Manufacturer: ESEN SKV

• Cable Length [mm]: 235
• Fitting Position: before exhaust turbocharger
• Number of pins: 2
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Number of connectors: 3
• Weight [kg]: 0.034
• for OE number: 009 153 52 28
• Name: SW 33 10 0824
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Number of connectors: 3
• Connector Shape: oval
• Socket colour: black
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Manufacturer: FAST

• for SA code: U43
• Number of pins: 3
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: without connection line
• Fitting Position: Soot Particulate Filter
• Version: AM
• Manufacturer: METZGER

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Manufacturer: ERA

• for SA code: F091, F117, F156, F176, F246
• Number of pins: 3
• Fitting Position: EGR Valve
• Quality: OE
• Manufacturer: METZGER

• Weight [kg]: 0.02
• for OE number: A 004 153 32 28
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 000 905 4005
• Cable Length [mm]: 500
• Number of connectors: 2
• Name: Andur, heitgaasitemperatuur
• Manufacturer: TRU

• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 230
• Weight [kg]: 0.035
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1,5
• Cable Length [mm]: 257
• Socket colour: black, beige
• Fitting Position: before exhaust turbocharger
• Manufacturer: FAE

• not for SA code: A11
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: before exhaust turbocharger
• Manufacturer: BOSCH