Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Block Separation:
- Length [mm]: 76
- Material: Thermoplast
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 65
- Weight [kg]: 0.142
- Manufacturer: FEBI BILSTEIN
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right, Wheel Side General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 81
- Height [mm]: 115
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8646T
- Block Separation:
- Length [mm]: 76
- Material: Thermoplast
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 65
- Weight [kg]: 0.031
- Observe service information:
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: FEB
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right, Wheel Side General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Block Separation:
- Length [mm]: 76
- Material: Thermoplast
- Inner Diameter 1 [mm]: 31
- Weight [kg]: 0.031
- Inner Diameter 2 [mm]: 65
- Name: SW 10 10 1672
- Manufacturer: SWAG
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right, Wheel Side General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Right,
transmission sided - Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 85
- Height [mm]: 123
- Joint Type: Tripod Joint
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 68
- Height [mm]: 109
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8647T
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 83
- Height [mm]: 115
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Kaitsekummikomplekt,
veovoll - Manufacturer: GKN
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- for special equipment code: 421
-
Fitting Position: transmission sided,
Rear Axle - Length [mm]: 124
- Weight [kg]: 0.274
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 81
- Packaging length [cm]: 11
- Packaging width [cm]: 11
- Packaging height [cm]: 9
- Manufacturer: FEBEST
- for special equipment code: 421
-
Fitting Position: Wheel Side,
Rear Axle - Length [mm]: 75
- Weight [kg]: 0.449
- Material: PVC
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 64
- Packaging length [cm]: 16
- Packaging width [cm]: 10.2
- Packaging height [cm]: 10.2
- Manufacturer: FEBEST
- for special equipment code: 421
- Fitting Position: Wheel Side
- Length [mm]: 122
- Weight [kg]: 0.257
- Material: PVC
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 84
- Packaging length [cm]: 14
- Packaging width [cm]: 10.2
- Packaging height [cm]: 10.2
- Manufacturer: FEBEST
- Joint Type: CV Joint
- Length [mm]: 115
- Material: Thermoplast
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Inner Diameter 1 [mm]: 26
- Weight [kg]: 0.177
- Inner Diameter 2 [mm]: 84
-
Name: Kaitsekummikomplekt,
veovoll - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
transmission sided - Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 70
- Height [mm]: 109
- Joint Type: Tripod Joint
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 65
- Height [mm]: 76
-
Bellows Material: TPE
(thermoplastic elastomer) - Quantity Unit: Kit
- New Part:
- Manufacturer: LOBRO
Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side, transmission sided General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks