• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 97
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Length [mm]: 95
• Fabrication Number: HCZ-ME-001
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Engine Code: M 264.920
• for article number: 7.8776, 7.8875
• Manufacturer: FACET

• Engine Code: M 264.920
• for article number: 1.880.776, 1.880.875
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Manufacturer: HELLA
• Name: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: both sides, Rear, outer, Front, inner, Centre
• Fabrication Number: EPDC-ME-009
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Construction Year from: 05.2019
• Supplementary Article/Info 2: without cable
• Vehicle Production Country: Germany
• Manufacturer: BOSCH

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 14.8
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Construction Year from: 05.2019
• Supplementary Article/Info 2: with cable
• Manufacturer: BOSCH

• Quantity: 2
• Number of pins: 3
• Name: DE SS12310-12B1
• Manufacturer: DELPHI

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,000
• Socket colour: black
• Manufacturer: JP GROUP

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Cable Length [mm]: 915
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• for OE number: A0035421819
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: ECP-ME-009
• Number of pins: 3
• Manufacturer: NTY

• for OE number: A0005408250
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: EBP-ME-001
• Manufacturer: NTY
• Name: NTY EBP-ME-001

• Socket colour: black
• Plug Type: Female
• Number of pins: 3
• Number of used contacts: 3
• Number of circuits: 3
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 700
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Manufacturer: METZGER

• Version: IAM
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,015
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 925
• paired article number: 31402
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,590
• Length [mm]: 52
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,490
• paired article number: 32032
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168881

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: NRF

• Fitting Position: inner, Left, Right, Front
• Required quantity: 4
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.4
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: outer, Left, Right, Front
• Required quantity: 2
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Name: VA 366360
• Manufacturer: VALEO

• Construction Year from: 05.2019
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Name: BS F026C00466
• Manufacturer: BOSCH

• Construction Year from: 05.2019
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Construction Year from: 05.2019
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• Construction Year from: 05.2019
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Suction pipe connector diameter [mm]: 8.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 5
• Manufacturer: DELPHI ELEKTRONIKA

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 925
• Manufacturer: DELPHI ELEKTRONIKA

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 05.2019
• Manufacturer: BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Mounting Type: Bolted
• Manufacturer: BH SENS HUF

• Required quantity: 2
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Fitting Position: Front, outer
• for special equipment code: 235
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: angled
• Version: IAM
• Manufacturer: METZGER

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 915
• Weight [kg]: 0.051
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Fitting Position: both sides, inner, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: Sensor, parkimisabi
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 915
• Weight [kg]: 0.051
• Name: SW 10 10 7876
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 170416
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,487
• Weight [kg]: 0.072
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 170673
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,524
• Weight [kg]: 0.073
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• Length [mm]: 1,003
• MAPP code available:
• Manufacturer: ATE

• Number of pins: 3
• Fabrication Number: EPO-ME-007
• Manufacturer: NTY

• paired article number: 33 10 0297
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,487
• Weight [kg]: 0.072
• Name: SW 33 10 0506
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 10 0506
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,524
• Weight [kg]: 0.073
• Name: SW 33 10 0297
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Length [mm]: 1,003
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: Front Axle Left
• Length [mm]: 1,581
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.07
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV329

Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Length [mm]: 1,581
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.072
• Name: CZUJNIK ABS DB P. C (205) 1,5H-3,0 13- LE
• Manufacturer: TEX

• Fitting Position: Front Axle Right
• Length [mm]: 1,618
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.073
• Name: CZUJNIK ABS DB P. C (205) 1,5H-3,0 13- PR
• Manufacturer: TEX

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV770

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Quantity: 1
• Manufacturer: HELLA
• Name: HE 6PR013680171

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Length [mm]: 1,618
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• not for vehicle production country: USA
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 4, 6
• Fitting Position: inner, both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL
• Additional information: 890019 VALEO
• Lisainfo: 890019 VALEO

• Required quantity: 2
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL

Fitting Position: outer, both sides, Front, Rear, lateral installation

• Number of pins: 3
• Connector Shape: D Shape
• Article number of recommended accessories: 2324231
• Manufacturer: METZGER

• Colour: silver
• Tightening Torque [Nm]: 4
• Mounting Type: Bolted
• Valve type: Air Valve
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Supplementary Article/Info 2: with valves, with screw
• Frequency Range [MHz]: 433
• Full Set:
• Recommended change interval [km]: 160,000
• Recommended change interval [years]: 5
• Valve stem material: Aluminium
• Observe the vehicle manufacturer specifications:
• for OE number: A 000 905 18 04
• pre-programmed:
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• for OE number: A0919057101
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Engine Code: M 264.920
• Sensor Length [mm]: 133.6
• Manufacturer: FACET

• Engine Code: M 264.920
• Sensor Length [mm]: 133.6
• Name: EP 1.800.245
• Manufacturer: EPS

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"