• Kasutuspinge [V]: 12
• Anduritüüp: NTC-andur
• Lülituspunkt [°C]: 150
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature, 2 pins
• Additional information: Sender for water temperature, 2 pins

• Kasutuspinge [V]: 12
• Anduritüüp: NTC-andur
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Manufacturer: JP GROUP
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Fabrication Number: ECT-ME-002
• Manufacturer: NTY
• Name: NTY ECT-ME-002

• Keermemõõt: M 12x1,5
• Manufacturer: FAE

• Võtmekaugus: 19
• OE-numbri jaoks: K05103534AA
• Manufacturer: KAMOKA

• Lülituspunkt kuni [bar]: 0,35
• Lülituspunkt alates [bar]: 0,15
• Keermemõõt: M12x1,5
• Lülitusulatus (bar): 0,2 - 0,5
• Kaal (kg): 0,03
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: NTC-andur
• Värvimarkeering: must
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Korpusevärv: must
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Keermemõõt: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Vehicle Identification Number (VIN) to: 246705
• Pistikkontaktide arv: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0292
• Additional information: 21-0292

• OE-numbri jaoks: 099 905 3800
• Manufacturer: TRUCKTEC

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 19
• Keermemõõt: M14x1.5
• OE-numbri jaoks: 0005426218
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Pistiku värv: must
• OE-numbri jaoks: 5080147AA
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

Manufacturer: FAST

• Engine Code: OM 611.980
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Keermemõõt: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• Fabrication Number: ECP-ME-001
• Manufacturer: NTY

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020
• Manufacturer: NTY

• Construction Year from: 04.1999
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-027
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 246705
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV682
• Manufacturer: ESEN SKV

Manufacturer: FAST

• Kõrgus (mm): 86,2
• Kaal (kg): 0,01
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Värv: must
• Anduritüüp: NTC-andur
• Pikkus (mm): 52
• OE-numbri jaoks: 651 153 00 28
• Manufacturer: MEAT&DORIA

• Anduritüüp: passiivne andur
• OE-numbri jaoks: 05080352AA
• Manufacturer: KAMOKA

• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 003 153 27 28
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: OM 611.980
• Instruments: with water temperature gauge
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,015
• OE-numbri jaoks: 099 905 38 00
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M14 x 1,5
• Manufacturer: ERA

• Kõrgus (mm): 50,6
• Kaal (kg): 0,027
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 51
• Fabrication Number: ECP-CH-019
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 246705
• Jämedus/Tugevus (mm): 52
• Välisläbimõõt [mm]: 10
• Ühenduste arv: 2
• Kaal (kg): 0,005
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 099 905 38 00
• Name: SW 10 93 4074
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 14x1,5
• Number of pins: 2
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

Manufacturer: FAE

• Keermemõõt: M14x1.5
• Ühenduste arv: 2
• Manufacturer: VERNET

• Transmission Type: Manual Transmission
• Pistikkontaktide arv: 2
• Rakendustüüp: mehhaaniliselt
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6DD010966431

• Fabrication Number: ESS-ME-000
• Manufacturer: NTY

• Engine Code: OM 611.980
• Housing Colour: black
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Kõrgus (mm): 18,2
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Kaal (kg): 0,021
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Colour: black
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Required quantity: 1
• Vehicle Identification Number (VIN) to: 246705
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV330

• Construction Year from: 04.1999
• Anduritüüp: passiivne andur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pinge [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Korpusevärv: must
• Anduritüüp: NTC-andur
• Manufacturer: FAE

• OE-numbri jaoks: 003 153 8628
• Manufacturer: TRUCKTEC

• Production number to: 15711637
• Production number from: 15029101
• Kõrgus (mm): 40
• Takistus [oom]: 1 150
• Ühenduste arv: 2
• Manufacturer: VERNET

• Engine Code: OM 611.980
• Name: EP 1.953.578
• Manufacturer: EPS

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: grey
• Number of mounting bores: 1
• Manufacturer: FAST

• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kvaliteet: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Sensor Type: Inductive Sensor
• Number of pins: 2

• Pistikkontaktide arv: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Kaal (kg): 0,014
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: OM 611.980
• Required quantity: 1
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Installatsiooni pool: hookettapoolne
• Anduritüüp: Induktiivandur, passiivne andur
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: väntvõlli jaoks, ilma kaablita
• vajaminev tükihulk: 1
• Takistus [oom]: 680
• valikuliselt:
• Värv: must
• Rakendustüüp: elektriline
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 40
• Pistikukatte kuju: D-kuju
• Kinnitusaukude hulk: 1
• Kaal (kg): 0,029
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

• Kõrgus (mm): 24,3
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Manufacturer: VERNET

• Pikkus (mm): 76
• Ühenduste arv: 2
• Kaal (kg): 0,031
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. DB CLK 05-
• Manufacturer: BRM

• Pikkus (mm): 51
• Ühenduste arv: 3
• Kaal (kg): 0,04
• Manufacturer: BLUEPRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 611.980
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Pistikkontaktide arv: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Kinnitusaukude hulk: 1
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Montaaživiis: kruvitud
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 04.1999
• Pistikkontaktide arv: 2
• Manufacturer: FAE

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Alternative Repair Kit: 550509
• Resistor [kOhm]: 145
• Manufacturer: ERA

• Fabrication Number: EPP-ME-001
• Manufacturer: NTY

• Pikkus (mm): 51
• Ühenduste arv: 3
• Kaal (kg): 0,035
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 51
• Ühenduste arv: 3
• Kaal (kg): 0,035
• Name: SW 10 93 2317
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Anduritüüp: Hallsensor
• Installatsiooni sügavus (mm): 24,3
• tootekoodile: 87435E
• Kvaliteet: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 5
• Component Number: 120-08-073
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: 611.980
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kaal (kg): 0,03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253825
• Additional information: VAL253825

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Manufacturer: FAE

• Required quantity: 1
• Pinge [V]: 12
• Vastab originaalosa värvile: must
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Värvimarkeering: hall
• Kinnitusaukude hulk: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita, koos rõngastihendiga
• Manufacturer: TOPRAN